Jump to content
SAU Community

Recommended Posts

Hey guys iam close to buying a ECU for my R33 GTST and i was wondering what brand ECU is best and can you buy a plug in ECU for a auto skyline or do i have to get a wire in unit because i have asked heaps of people and like it normally is everyone's got a differant idea, If you can help me it would be much appreciated

cheers

Link to comment
https://www.sau.com.au/forums/topic/109061-what-ecu-is-best-for-r33-gtst/
Share on other sites

if you do a search you will find a shit load of threads all stating that :

no after market full replacement ecu works properly with the auto , although some claim they do , they dont

this limits you to interceptor type devices like the safc II or emanage

well an apexi isnt a wire in for a start

i think you should search

Hey man i was told that i couldn't buy an apexi plug in because my car was an auto so i naturaly thought it was a wire in unit sorry about that iam new to all this

with an auto You might have to run a Piggy back computer

or you can run a

Hydra EMS computer

which adaps the auto box funcitions into it

Wat is the damage and have you seen them work on an auto

james

  • 4 years later...

Lol dood i dont think people have had a good read at this topic. Mate unfortunatley you cannot use a apexi power FC because it doesnt support automatic gearbox intergration. You could try wolf3d im stuck in this situo as well. Too head you in the right track you will have to have a piggy back ecu or Use another ecu for Fuel and Ignition and use the standard ecu to run everything else. Also try a nistune supplier http://www.nistune.com/workshops.html

mythbusters ahoy

and blast from the past - beyond 2000

you cannot (well shouldn't) use most stand alone ECU's on ECR33 Auto

this is because the standard ECU has all the logic for gearchange control

if you replace this ECU with a standalone that is a MANUAL ECU (that is, does NOT support the ECR33 AUTO box) then it assumes manual

it wont back out timing on gear change, which results in harsh/jerky gearchanges and the changes put stress on the box

this "gotcha" applies to most stand alone ECU's, be it Apexi, HKS, Motec, Autronic, Wolf etc etc etc

your best option is nistune or emanage or remap or safc

all of these options keep the stock ecu, and retain the factory gearbox logic

users have insisted that powerfc (and other stand alone ecu's) etc work on AUTO

and the truth it, it does work, you can start the car

you can drive, you can boost it etc

but the changes will be harsh and youll risk the box

if you are OK with that, go for it, but you know the risks/results

this "gotcha" only applies to ECR33 auto where the gearbox is electronic control logic and needs the main ecu to do the logic change for it

cars such as vl turbo, toyota either have seperate ECU control for autobox or mechnical (vl turbo)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...