Jump to content
SAU Community

Recommended Posts

Thanks Bob and Bryce. Already getting some more info from RaceFab. Bryce, like Matt said, gtt has been replaced with a 34R.

It already has tomei restrictors (1.5mm from memory). Getting a catch can setup (rocker covers to can. Top of can to sump fitting #1, bottom of can to sump fitting #2.

Was going to get cam cover baffles but it seems its a waste?

Thanks Bob and Bryce. Already getting some more info from RaceFab. Bryce, like Matt said, gtt has been replaced with a 34R.

It already has tomei restrictors (1.5mm from memory). Getting a catch can setup (rocker covers to can. Top of can to sump fitting #1, bottom of can to sump fitting #2.

Was going to get cam cover baffles but it seems its a waste?

You're on the right track. What kind of oil pump are you using? I would go for 1.2mm restrictor if there's just one or 2 x 1.0mm.

  • Like 1

I don't agree with the rear oil feed being blocked off and beleive it was a "quick fix" by Nissan when they realised how much oil would go to the head and get trapped there, it also creates a air pocket under the bung which IMO is never a good idea as it give the oil somewhere to go if there is a spike in oil pressure from say a preignition which allows the oil to get pushed backwards from the bigend allowing contact which can result in spinning it

Even wonder way it is almost always one of the rear bigends that spin ?

They should be removed and replaced with 2 appropriately sized restrictors, i have a Nitto pump and 2 x 1mm restrictors in my 2630

  • Like 1

I don't agree with the rear oil feed being blocked off and beleive it was a "quick fix" by Nissan when they realised how much oil would go to the head and get trapped there, it also creates a air pocket under the bung which IMO is never a good idea as it give the oil somewhere to go if there is a spike in oil pressure from say a preignition which allows the oil to get pushed backwards from the bigend allowing contact which can result in spinning it

Even wonder way it is almost always one of the rear bigends that spin ?

They should be removed and replaced with 2 appropriately sized restrictors, i have a Nitto pump and 2 x 1mm restrictors in my 2630

Interesting theory.

The rear bearings are also furthest from the pump, that would be a contributing factor.

Interesting theory.

The rear bearings are also furthest from the pump, that would be a contributing factor.

It's oil under pressure, the distance from the filter to the last bearing isn't that far different then the front one

It's oil under pressure, the distance from the filter to the last bearing isn't that far different then the front one

Yeahh I get that, but couldn't undr the same circumstances of your example the oil be squeezed out through the other main bearings?

It's oil under pressure, the distance from the filter to the last bearing isn't that far different then the front one

Like you siad. It pretty close; bearing wise. I won't say it again, and the only reason im saying it. Is beacuse of 2 reasons.

1. I was cursed to have the ability to be able to try all of the above mensioned so called solutions. (I know this will bite me in the butt later for saying this) 2. The damn money to learn hard ass leasons that don't work. ( guilt for not realizing the reality fast, bandaid approach) I would like to add a 3rd!! To think that there is a holy grail thats, theres a solution most of all that would justify my own fulfillment of my own personal goel to ignore oem flaws.

Now know how to fix it for the love of my own understanding, as to what to invest in, whiles asking myself is it worth it. ????. Sorry for my personal opions even if its not what most wants to hear. The rb motors are just flawed for the oil lubrication stand point.

Having a blocked restrictor hole creating an air pocket wouldn't drop the pressure at the bearings but create a lot of lag in building pressure. Just think about how a few air bubbles can affect how your brakes work.

MJTru if you keep complaining you may as well sell your skyline and buy a toyota corolla so we don't have to hear your opinions anymore.

MJTru if you keep complaining you may as well sell your skyline and buy a toyota corolla so we don't have to hear your opinions anymore.

Sorry mate sorry. Ill stop complaining.

What I have figured out from the other side of the world is. Is this thread needs to be more foused. People on this topic should face couple of facts even though they may not like it. For circuit racing there is just nothing better than a dry sump setup and you can sit here and talk all ya want about taking long left hand turns or rights for that matter. At the end of the day if this thread was to advise people in prioritizing there results based on there investments and time spent on there motors as well as how they use it, it would help 90 % of the people that read this thread and stop at page 30, and under. Prioritize the info and save time and money. It reminds me of the 90 -10 rule in life 90 % of the people making 10% of the money and 10% of the people making 90% of the money. It relates to almost everything in life. It even goes for hp goals. Wow. Funny how people react to just opions here. Im one of them.

Brakes and engine oiling are to completely different realities, the pump creates a constant flow of fluid which would pressurise the air pocket then find path of least resistance with the internal pressure valve in the pump mantaining a constant pressure

The problem with an air pocket is air compresses at a much different rate to oil, this increased rate of compression is what can allow oil somewhere to go in a hurry when shit hits the fan

weather this makes a difference or not doesn't matter to me, if there is a easy way to remove it then it goes

I'm just trying to give ideas, do with them as you please

I know this much, i don't have pressure drops or spikes and there is very little oil coming out of my first catch can and none out of the second one and i've done 6 hill climbs and 2 track days and 2 trips to the drags so far

XKALBA the second paragraph is what I was trying to explain, sorry if it wasn't clear. Hypothetically if you had a big enough brake master cylinder you could overcome air in a brake system too.

MJTru what you're saying is this topic should have started by saying "get a dry sump- the end"?

Edited by Dobz

Dry sump is obviously the best method and if you have a full race car perfect, get the dry sump setup

We have street cars and where we live the powers that be disapprove of those things on road cars so finding the best setup using a wet sump is what this thread is meant to be for

  • Like 1

and yes a dry sump is the solution. For serious life. My car never dropped below 90 psi with the dry sump

Mind you there is always the I threw a belt issue that will f**k you

For kids in the northern hemisphere most race series ( is austrlalia) won't let you run a dry sump

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...