Jump to content
SAU Community

Recommended Posts

Well I have made the mine set, that I should try and get a purpose built track car, I have a chance to pick up a track only R32 GTS-T and give the R34 a little rest on the track days. The car is basically stock and I was looking to turn it into a track worthy bad boy. I am looking out for the following bits to cost up the final outcome. I have listed my track mods and would like some opinion if I have my priorities mixed up. Or if someone can point out something I have missed.

Phase 1 (Must do)

1. Oil cooler (Large Sump if I can get one)

2. Brake pads & dot 4 fluid (Rotors and caliper upgrade if poosible)

3. 17 Wheels and tyres (What size fits on the 32 width wise)

4. Coil overs (Any suggestions on which type?)

Phase 2 (Go fast)

5. Balled turbo (GTRS would be nice!)

6. Exhaust, Pod, FMIC, bleed value (How much boost?)

7. ECU

8. Camber kit

9. Sway bars

Any other suggestions or missed bits?

Link to comment
https://www.sau.com.au/forums/topic/112241-track-car-r32-gts-t/
Share on other sites

Well I have made the mine set, that I should try and get a purpose built track car, I have a chance to pick up a track only R32 GTS-T and give the R34 a little rest on the track days. The car is basically stock and I was looking to turn it into a track worthy bad boy. I am looking out for the following bits to cost up the final outcome. I have listed my track mods and would like some opinion if I have my priorities mixed up. Or if someone can point out something I have missed.

Phase 1 (Must do)

1. Oil cooler (Large Sump if I can get one)

2. Brake pads & dot 4 fluid (Rotors and caliper upgrade if poosible)

3. 17 Wheels and tyres (What size fits on the 32 width wise)

4. Coil overs (Any suggestions on which type?)

Phase 2 (Go fast)

5. Balled turbo (GTRS would be nice!)

6. Exhaust, Pod, FMIC, bleed value (How much boost?)

7. ECU

8. Camber kit

9. Sway bars

Any other suggestions or missed bits?

Having been using our R32GTST on the circuit for 3 years, following are my suggestions;

1. Oil cooler is essential, the 2wd sump is much better than the 4wd sump, so it wouldn't be on my list to upgrade in phase 1

2. Pads and fluid are good, I rebuilt the callipers and fitted braided lines, the rubber ones weren't in such good condition. I also went straight to DBA slotted rotors. If you get an MSpec, don't worry about upgrading the callipers they work great.

3. I use 17 X 8 with 35 mm offset all round with 245/40/17 R type tyres (currently Yokohama A032R's)

4. The Jap ones are crap, I use Bilsteins with Eibach coils

5. Personally I think the GTRS is too big for an RB20 on the circuit, they are also expensive for what they are. I used a GCG ball bearing high flowed RB25 turbo on our RB20. The old girl had an untouched 170,000 k's, so I limited it to 225 rwkw, plenty fast enough, was the fastest Skyline at every event we ran. It's not about max power, on the circuit it's the average power and the standard gearbox ratios require a nice spread.

6. I used a Autospeed twin valve boost controller until we upgraded to the Power FC Boost Control Kit. I felt safe at 1.3 bar for the 225 rwkw. The exhaust was turbo back, split dump, 3.25" all the way

7. Power FC, with Datalogit

8. Whiteline bushes everywhere, caster is very important, gets rid of that turn in understeer. Adjustable camber bushes front and rear and rear subframe alignment bushes set for "good allround"

9. Whiteline adjustable, because stabiliser bars are the best bang for buck handling upgrade you can make.

10. Get rid of the HICAS

11 Strut brace on the front is essential, do the rear when you have done everything else

I could write a few more pages but that will do for a start, then get out and drive it, run as many events as your can afford.

Hope that helps

:laugh: cheers :D

Edited by Sydneykid

What the hell would I do with a RB31DETT!. Before I start going fast I want to have the brakes, tyres & Suspension sorted. There will be plenty of beers had before we start dropping in rocket enginees!

definately a good idea. my advice though is get one that is road registered or at least complied (so it can be registered). trailering a mild car to events is a pain. fair easier to drive it there. plus should you want to sell it the re-sale on an unregisterable car is minimal.

i have just done the same thing. I bought a 32 GTST to use as a track car a few months ago, but after thinking about it i have decided i like racing the GTR too much to just keep it as a street car, so i will probably race both, or sell the GTST.

good stuff paul!! joining the gtst club is the way to go.

with the turbo i had a t3/4 hiflowed which is off vl commodore, i ran 16psi all day every day didnt miss a beat! and you saw how well it went out on the track. with tyres i have 10'(275) on the back and 8'(235) on the front by 18s and with suspension i have same set up as sydneykid suggested bilstien shocks and Eibach springs, and it handles fantastic

good luck hope to see ya out there soon.

aaron

in terms of a trailer, depending how many track days you're actually doin a year, it works out cheaper to just hire a trailer for the day rather than buying one

Not once everyone finds out you have one and wants to borrow it.

For a fee of course ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...