Jump to content
SAU Community

Recommended Posts

Yes you are reading correct...

Im glad to anounce after a couple of weeks of research and planning we have finally confirmed the "SAU QLD DYNO NIGHT". After many attempts to get the crew together at night i have finally found a shop willing to make lots of noise after hours...

The details are as follows...

Where:

Allstar Tuning Systems

Unit 4C, 194 Zillmere Road

Zillmere, Queenland

Australia 4034

NOTE: Refer Map in pictures below to see where to go.

Website:

http://www.atsperformance.com.au/

When:

Thursday the 4th of May

Starting at 6pm til late

Cost:

$45 for Members

$55 for non members

This will get you 3 power runs and a print out of the best run...

Why:

Why not???

Well we can use this occasion to look and listern to skylines going nuts at full boost. Its also to meet and greet new members and put faces to names. Its also a time to recruit new members to the club. Anyone who joins up on the night will get on the dyno at members pricing $45. So there is a $10 reason to join inbetween now and then.

Food:

All star are a workshop and not a milk bar...

If food is needed there is a McDonalds about 2 minutes drive away...

We need 10 cars as a minimum to make this work... This topic has been opened to members of the club now for a week so 8 spots are already filled. I need 2 more cars to make this work. I have permission from Richard (the boss at allstar) that we can have up to 15-16 cars... So thats awsome...

This makes it bigger than the last dyno night we had... So post here your intentions to run on the dyno...

All funds will be paid on the night, if you put down to run i expect you to be there otherwise i fit the bill....

I dont want to take deposits i just want your word to be there...

The all important list of cars running:

1. Col-GTSX (R33 - 2wd)

2. Rhinorebel (R33 - 2wd)

3. Bunta (R32 with 33 heart - 2wd)

4. gts25t4door (R33 - 2wd)

5. shaneo81 (R33 - 2wd)

6. R32 Driftah (R32 - 2wd)

7. r33skyliner (R33 - 2wd)

8. owned (R32 GTR - 2wd Mode)

9. n15m0 (R34 - 2wd)

10. Colz (180SX - 2wd)

11. Fish (Silvia RB20DET - 2wd)

12. Insane001 (R32 - 2wd)

13. R34GTX (R34 - 2wd)

14. 666DAN (R34 - 2wd)

15. booosted33 (R33 - 2wd)

16. ImpulR33R (R33 - 2wd)

Green = Qld Members $45

Blue = Non Members $55

Maby a few reserves would be nice also, incase of people not turning up. If you would not mind running on the night and there is room then bring your skyline. Depending on popularity then this may become a bi-annual event. Below is a map of the location of their workshop, the entrance is about 100 metres back from the roundabout off newman road. Its quite easy to find, just follow all the other skylines.... LOL

Thanks Colin

post-2979-1145587586.jpg

post-2979-1145587657.jpg

post-2979-1146201777.gif

Link to comment
https://www.sau.com.au/forums/topic/114378-sau-qld-dyno-night-meet-greet/
Share on other sites

  • Replies 194
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'm glad you rang Allstar today Col. I was there this morning and they said either date was good and they tried your mobile only to find it was switched off. I volunteered to contact you at your work and they said it was your day off!! Lucky all around!!

See you all on the 4th of May (Of course this all depends on my car surviving the QR Raceday on the 2nd...)

I'd love to get a car dynoed, but I think everyone would laugh at my current "beast":

92 Toyota Paseo FWD, Stock. Oh yeah, you can stop laughing now :(

I will have my RX-7 Spirit-R, oh yes, by the end of the year (fingers crossed).

what has this got to do with skylines?

owned, your added to the list... R33 - 2wd im guessing???

Mud its not that im doing a list of people coming as such its just i thought if you said you were coming then heaps of people will be despirate to get some of your autograph and therefore come...

Also note, there will be a guest appearance from Col-GTSX as your photographer on the night to catch all the action...

owned, your added to the list... R33 - 2wd im guessing???

Mud its not that im doing a list of people coming as such its just i thought if you said you were coming then heaps of people will be despirate to get some of your autograph and therefore come...

Also note, there will be a guest appearance from Col-GTSX as your photographer on the night to catch all the action...

apparently its r32 gtr hes driving these days iirc *shrug*

still no licence

incidently guys remember that this brand of dyno reads differently to dyno dynamics and results are only comparable to runs made on the same dyno, thinking back to when the 31 club held a dyno day at allstar there was some grumbles about low power readings compared to what people were expecting(personally i was just glad my car didnt blow up).

good to see theres a place that will run the dyno of a night, these nights were very popular when we held them at mercury

personally i was just glad my car didnt blow up

Hehehe Thats always a good thing...

Problem is that no matter what dyno u go too they all read different...

Its more about the comparison.. Plus there were no other workshops willing to make loads of noise at night...

I mean the dyno at tafe said my old sr20det powered pintara had 40rwhp... So it was wrong but whos to say how right or wrong any of them are???

owned, your added to the list... R33 - 2wd im guessing???

Mud its not that im doing a list of people coming as such its just i thought if you said you were coming then heaps of people will be despirate to get some of your autograph and therefore come...

Also note, there will be a guest appearance from Col-GTSX as your photographer on the night to catch all the action...

sorry i've not updated anything recently ooops.... mah bad. :(

its an R32 GT-R now but its all good.. just pop a fuse if its a RWD only dyno :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...