Jump to content
SAU Community

Recommended Posts

Little B, agreed. Like those thoughtless robots that park their shopping trolley on your car to stop it rolling away as they load their 2.4 kids and this weeks load of frozen pizza (dont get me started with that one) into their personal shopping trolley. I caught one a while ago and it gets that $hit eating "i'm sorry but it's only a car " grin on its dial.....Die tracksuit wearing prozac muncher,

&

Jealous tards that try to impress their dopey mates by trying to pry the GTR badge off...Die ass clown!

Reatil, retail, retail err let me think...ok ok i got one, paying retail for anything HKS...so i dont :mellow:

Man...I must be running out of stuff, errr.... having my new IC and fuel system installed :D , knowing that i have to stay on site and wont get to drive my R for another 4 weeks :( I know, its pretty weak but retail is a fairly specific area...and this stupid warn level....who did I annoy to deseve that!

Although i'm a white male and therefore automatically blamed for everything from global warming (yes my fault) to returning empty juice cartons to the fridge (no, not my fault)i dont know if i can continue to be righteous in my indignation of those who would make my life just that much more crappy :mellow:

cue the fruit :mellow:

Edited by Mr. Keets

My 2c

Retail - rude customers!! why do you think its ok for you can be rude to me when im at work?!?! and why dont you have a guilty conscious about it ? WHYY?!?!

Ladies with prams at the shopping centre - made even WORSE if there's TWO ladies with TWO walking SIDE BY SIDE!! HEllO?!!?!? Move the f** over! LOL

People driving slow in the right hand lane (same as everyone else) MOVE OVER! Speed cameras should book people doing UNDER the speed limit as well as over!!

little brats with ignorant parents - everyone can hear/see it screaming/climbing on things it should be/touching things it shouldn't be/walking unattended around the shop WHY do you choose to ignore it?? and its NOT cute when they make a mess/bump into someone (especially if they're carrying hot food/drinks)/throw a tantrum on the floor

:D yeah... theres just a few for me! :D

Every day when I’m driving home I come up to a point where I need to turn left onto a new road.. I need to get into the second lane on this new road so that I can then turn right and not be stuck in the left lane.

Yet when I sit there and indicate to turn left onto the road people try and let me into the traffic. Nice of them I know but I need to get into the second lane so I smile and wave them on because I don’t need the lane closest to the verge but the inside lane so I can turn right in 200 meters.

Now in the last week I think at least 3 people have given me the finger because I haven’t accepted there offer to go in front of them and get totally lost because I couldn’t make my right turn because I was in the wrong lane.

Other people... Including a nice looking granny yelled several swear words that totally shocked me!! **But I got your number plate granny.... I'll get you one day..

And that..

is what grinds my gears..

u know what we need? a thread with a description of a car, person and number plates, as well as your reason for bagging them.

by the end of the month we'd have this list of "white lancer, p plates, ignorant girl with plates 1ABC-123 cut me off into a pedestrian etc etc"...

how bout that for a grind-my-gears thread?

Bit too blatant? heh some ppl simply need to vent...

u know what we need? a thread with a description of a car, person and number plates, as well as your reason for bagging them.

by the end of the month we'd have this list of "white lancer, p plates, ignorant girl with plates 1ABC-123 cut me off into a pedestrian etc etc"...

how bout that for a grind-my-gears thread?

Bit too blatant? heh some ppl simply need to vent...

Nice idea but I dont know about putting rego numbers up on the forum.. :)

Maybe make a new thread called ( IDIOT SPOTTED THREAD ) LoL.. but yeah no rego numbers..

Other people... Including a nice looking granny yelled several swear words that totally shocked me!! **But I got your number plate granny.... I'll get you one day..

Thats gold AlphA :laugh:, I remenbered one time when a granny cut infront of me and nearly took me out. I sounded the horn to warn her, but she return the gesture by flipping the bird at me I was like WTF its like a war zone out there on the road haha.

having used lotus notes in school before. I never knew why in the world pple actually bothered with lotus notes, i could gather a few geeks and they'd probably be able to do something wayyyy better in 1mth than what lotus could do in 1 year.

that was my second post kym "Having to support Lotus Notes sucks even more"

Being a Domino Admin is part of my job and I must say I try to palm off anything to do with Lotus lol.........

It's a good thing that we are currently in plans to change over to exchange/outlook :) wooohooo

u know what we need? a thread with a description of a car, person and number plates, as well as your reason for bagging them.

by the end of the month we'd have this list of "white lancer, p plates, ignorant girl with plates 1ABC-123 cut me off into a pedestrian etc etc"...

how bout that for a grind-my-gears thread?

Bit too blatant? heh some ppl simply need to vent...

www.idiotdriver.com.au

Thats for that sorta crap if your into it..




  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...