Jump to content
SAU Community

Recommended Posts

So i take it you arent going to DECA then?? you should do the box change over and see if it keeps staying engaged, then cancel deca. it may sort itself out with the chance over... glimmer of hope for ya.. Im free thursday too if ya go through with it

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Well, not sure at this stage...

Thanks for the offer Ryan. From what I've been told, if it doesn't fix the problem, the car will still drive fine, but I have a higher chance of smashing this box aswell, which I can't afford to do right now, not for the next 3 months or so that is, so I don't know if I want to risk it.

I also don't want all you guys to bust your balls for me on a whim if you know what I mean, I'd just feel bad about it...

If your clutch is a bit ???? and your rear main seal a bit ???? then i would be waiting and doign it all properly.

What exactly is wrong with the clutch that means its not disengaging? I dont know but that sounds to be an adjustment thing ????

But do it right, missing a DECA sux but you do have a back up car or two :P

Buy a new clutch. Rebuild the old clutch later and sell it off as a rebuilt clutch.

The extreme clutch supplier dude that me and Al have used will deliver next day.

Wack the new clutch and BOX in on thu night and bob's my dad.

Don't worry about the time taken to do it. As Ash said, it wont take all night.

Is it currently a twin plate?

I will also be available for Thursday night, so i will give Dave a call on Thursday to get an update.

On a another note, i may have to pull my car out of DECA :D.

Went for a drive on the weekend and was hearing a deep winding noise from the engine bay, at idle. Tracked it down to behind the cam covers. Will be taking the car to my mechanic tommorrow to have a listen, if he knows all is ok, then no problem, but if he suspects a fault then i will pull out :(. I was so pumped up for this event :ermm:

Either way i will still come up!

Anyone got a spare 33 i can borrow? ;)

heh, i may still have my old clutch layin round, but i doubt you would want to do that, especially at deca. the only good thing is your gearbox wont be hurt in the slightest as it will probably never fully engage with all the clutch dumping. as for putting everyone out i think we see it as something to do!!! would be a bit of fun;)

Daneeeee

Im more than happy to give ya a hand with all this, and even if its the clutch, we can look at it with the box off, its the best time for it.

its for free dude, you might as well give it a try and see if its worth it.

Cheers

Sean.

Troy: I'm not sure exactly what makes it not disengage fully, but it's something to do with a few stress fractures I have in the clutch plates. I've been strongly advised not to put another box in without fixing it. In their words the clutch is 'f**ked!'

Chris: Yeah, it's currently a twin plate OS. Just buying another clutch would be the easy option, I work right next to EXEDY, but I simply can't afford it at the moment. I just put a fair amount of money into it last week...

Ryan: Thanks man, appreciate the offer dude!

Sean: thanks man, why is it always you that ends up fixing my car?? :D haha

Realistically, I think the only way to get it to DECA is to put another clutch into it, whether that be a secondhand one I can borrow, or a new one, which is just not an option at this stage...

ahhhhhh well...

I've just pulled out of DECA...

Thanks for the offers guys, much appreciated, but I should just do it once and do it properley with a rebuilt clutch I think.

:)

no one else will say it, but im a kent so its ok....few more withdrawals and we can double our pan time!

oh yeh, bad luck with the car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...