Jump to content
SAU Community

Recommended Posts

My gtr

image_1361131421047853_zpsc796bd87.jpg

adamcar2-2_zps8818b747.jpg

adamcar5_zps26dac7b7.jpg

adamcar4_zpsca97e492.jpg

adamcar3_zps6432ca25.jpg

Mint 32...I think I saw that on Pistonheads :)

Shitty photo but got my carbon wing extension finally.

537224_604510506242989_1320401154_n.jpg

Was only a matter of time until those rear spoilers caught on. Awesome looking pieces of kit. Amongst all these pretty cars ai recently trie dto rpetty up my engine bay of my track 32...its a bit blingy but blowby will soon dull everything down :)

398854_10151838547609741_1680740710_n.jp

Mint 32...I think I saw that on Pistonheads :)

Was only a matter of time until those rear spoilers caught on. Awesome looking pieces of kit. Amongst all these pretty cars ai recently trie dto rpetty up my engine bay of my track 32...its a bit blingy but blowby will soon dull everything down :)

398854_10151838547609741_1680740710_n.jp

Roy what is that thing that is in front of the turbo and under the line from the rocker cover to catch can? Looks like a water bottle? >_>

rebAjPP.jpg

Ahh how did you go on Sunday? I'm mates with the guy who sold you his spot haha, unlucky about his engine bay fire :(

very nice.

So neat.

Reminds me of the 4 door 33gtr.

thanks man :) cars back in the panel shop getting the ripples taken out and the front end fixed.

Shitty photo but got my carbon wing extension finally.

537224_604510506242989_1320401154_n.jpg

that is now on my list.

thank you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...