Jump to content
SAU Community

Recommended Posts

Yeah my 32 GTR with PFC does this also ! It has version 8.04A. Seems same as others- could happen a few times a day, hot or cold, mostly light throttle. I was told was prob a AFM problem but when i run it with the stock nissan ECU the problem stops so that rules that out.

  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

If this info help, my FC Djettro with map sensors does it too.

It does it once in a couple of hundred-thousand km at very light load, it is unpredictable and is certainly not reproducible. All monitoring parameters are all safe. Go figure! I guess the GTR god want to be driven fast all the time :D

have added this issue as a work in progress to the FAQ

also it should be noted PFC's with NEC Processor 78P3 CPU are NOT reflashable

78p3.jpg

only newer, ie: pre 2000ish are reflashable, they have a 78F4 processor and an onboard connector for reflashing

78f4.jpg

dont recall this ever happening to mine. 32 GTR, PFC, 8.04a.

interesting - so what other mods do you have ?

I'm still fishing for some commonality some where !!

Also interesting to hear that even the D-Jetro PFC has this problem

my bad. yeah the newer models are ok

im pretty sure my ecr33 pFC isnt reflashable

and it was fairly new, 2002ish

but still based on the old powerfc chipset

this is my ECR33 from aroud 2002ish

http://members.dodo.com.au/paul/docs/power...werfc-board.jpg

it has the nec 78p3 processor

my software is 8.04a and R32 GTR

I think I see a pattern forming here >_<

OK

1: how do I check if my PFC can be upgraded (remove and inspect ?)

2: what is the current (newest) version of the software (should I be down revving ?)

3: where in Sunny Brisvegas would I go to get it done

1. if you pop the cover off youll see the NEC 78P3 processor, it will be part of the model number, it will be the biggest chip on the board. take a pic for recon purposes and post up or send to us please >_<

if its the 78P3 it cant be reflashed, as its a burn once chip

2. newest version not sure, i guess anyone with a recent Rb26 PFC, purchased in the last few months is likely to have the latest code on it

3. i know geniunine apexi dealers can fix/warranty and possibly flash/upgrade your PFC to a newer version but i believe this is only on $1500 PFC's purchased from like MYC or an aus dealer

ask myc.com.au how much to get a new PFC code installed on it (if they'll let you that is). you may find it cheaper and easier to buy a new PFC from nengun. but that guarantee's nothing at all.

the key to this i guess would be to find someone who has an RB26 32/33 ECU that doesn't have this problem, then look at what version they have. then ask nicely if you can swap FC's with them for a week and see if the bug follow's the FC with the bad version. if so then you'll know what the good version FC to go for is. sell your known bad version on ebay and look for a specific version FC

Ill pull the lid off mine tommorow and report what chip it is. Mine was in the car when i bought it, but they buy payed 1500 for just the power fc from PVP imports in SA, so i assume it could be a legit "aussie delivered" one maby.

Well - I got mine from Nengun (paid $950 for it)

So I KNOW mine will not be covered in Aus

I'd be happy to pay for the upgrade if

  • I knew it fixed the problem
  • it was not too expensive
  • did not require a full retune (dyno)

Seems I chimed in late on this one, but I have had the same issue on 3 PFC's...

One was in a 33 GTST & I have had a standard PFC & DJetro in my 32 GTR & they all did it.

Having said that it is so infrequent that I'm really not bothered about it.

I've been through 3 (well 4 if you count the Mines modded) ECUs on my R.

First version was a "3.08" version that had the intermittent miss at cruise loads.

Second was a Wolf 4 (MAP sensors) that had NO miss.

Third is the D-Jetro PFC and the "cruise miss" returned. Now the strange thing is that I recently (before buggering off overseas again) installed an HKS "Twin Power" CDI unit and the miss is gone for good!

I covered a good 1,000 kms with it installed and it's definately not a "placebo effect"

My gut feeling is that the miss is ignition related.

Edited by Gav
I've been through 3 (well 4 if you count the Mines modded) ECUs on my R.

First version was a "3.08" version that had the intermittent miss at cruise loads.

Second was a Wolf 4 (MAP sensors) that had NO miss.

Third is the D-Jetro PFC and the "cruise miss" returned. Now the strange thing is that I recently (before buggering off overseas again) installed an HKS "Twin Power" CDI unit and the miss is gone for good!

I covered a good 1,000 kms with it installed and it's definately not a "placebo effect"

My gut feeling is that the miss is ignition related.

I agree - it just feels like that sort of miss

what's included in the CDI kit ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...