Jump to content
SAU Community

Jackets... Get Your Supercool Sau Vic Jackets...


Recommended Posts

All

Jackets have been ordered - we expect to have them available mid-July (before Drift for Dummies).

I'll post the production mockup pix when I have them back from the manufacturer - but for now, you'll just have to trust me that these will look ace :P

They are a 2-part polar fleece vest and jacket that can be worn separately, or as one cosy set.

They are black with grey panels and reflective piping.

We are ordering 50 - in a range of sizes from S to XXL

We will have some sizing samples at the Midnight Cruise - and I'll try to arrange something for next week too.

size_JK_18_1.gif

size_JK_18_2.gif

In the mean time - I would like people to reseve sizes, and ideally pre-order/pre-pay for these (to help our cashflow). So....

Normal cost:

$120 for members

$160 for non-members

Pre-pay members = $115

Pre-pay non members = $150

Important note - the pre-pay price is only valid if you PAY. Pre orders are fine and great for us to order sizes correctly, but unless you pay before delivery - the costs are the normal ones. This is entirely due to cashflow reasons - and there will be no exceptions.

Payment via EFT only

You must use the following format for your deposit: "JACKET FORUM NAME" (Eg, JACKET Jamezilla)

Bank: Westpac

Name: Skylines Australia - Victoria

BSB: 033305

Account: 265609

Thanks

James

post-936-1153303159.jpg

post-936-1153303174.jpg

  • Replies 279
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ORDERS

Jamezilla = M & L (PAID)

Snowman = M & S (PAID)

Age = XL

LeeWah = S (PAID)

rchoo = M

phunkey_monkey = XL (PAID)

GTR-Geoff = XXL (PAID)

MissJuz = S (PAID)

Ant95 = M (PAID)

Joel = L (PAID)

Ash = M & M (PAID)

Jetdat = M (PAID)

Crispy = L (PAID)

Saff = M (PAID)

Dezz = M & S (PAID)

Dark = L (PAID)

Al = XXL (PAID)

Daz = XL

Blackrex = XXL (PAID)

Skybee = L

Crack = XL

Mav = L (PAID)

West = S (PAID)

Yug = XL

Jack = XXL (PAID)

ScottA = XL (PAID)

Sarah = M (PAID)

Driver Dynamics = XL (PAID)

Will = M (PAID)

Scotty = L

Greg = L (PAID)

Shiv = S

Jackie = S (PAID)

Bec = L (PAID)

Adz = L (PAID)

Pete = M & S (PAID)

Danny =XXL (PAID)

Roy = M

Scotsman = L

AlexCim = M (PAID)

Gareth (gaffa) = XL (PAID)

Babia = M (PAID)

Tekin = XL (PAID)

Ryan = XL (PAID)

Paul = L (PAID)

Justin911 = M

Nige = M

gdogzgtr = M

thebuzz = M (PAID)

CNBLOW = XL (PAID)

JVP-R32 = XL (PAID)

R32_BigBalls = XL (PAID)

Adam (Tuspeed) = XL (PAID)

Aaron (Rampant) = XXL (PAID)

Ben (JSpec) = XXL (PAID)

Craig (JSpec) = XXL (PAID)

Total = 61

Geoff - I am waiting on the pre-production comps to come back but...

Handsome Dan here is modeling the jacket type:

jacket.jpgJK_18_large.jpg

And below are the artwork proofs - showing left sleeve, right sleeve, back, jacket front and vest front (vest back is the same as the jacket)

J

post-936-1150961848.jpg

Hi James....long time no see mate.....def. put me down for one of these. I'm thinking if you are going the L then I'll be either a L or M.

Just keep us updated on fits so I can narrow it closer to the order

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...