Jump to content
SAU Community

Recommended Posts

Hi guys!

I'm a regular on the Stagea section of the forums as thats what I drive, but I wanted to ask a question to all the skyline owners out there.

I'm continually getting told by 2 of my brothers who are Ford fanatics that the Aussie cars, ie Ford falcons are more reliable than the japanese imports because #1 they have a good motor (me starts laughing) and #2 there are loads of fords (and holdens) out there with 300,000 or even 400,000 km's on the clock and still going.

They tell me that skylines/stageas etc just wont last that long. I very much doubt they are right but I thought I'd pose the question and just ask who out there has a skyline or stagea or any RB25 or RB26 powered car that has done more than 300,000 kms?

To me the RB engines and other nissan turbo engines are among the best in the world in their class.

I just thought I'd find out for myself the answer to how long the RB engines will last if treated fairly nicely.

The whole aussie cars vs jap cars thing is a bit like apples and oranges because most import car owners tend to modify their cars a bit, but even so, lets see how reliable they are. :)

Hi guys!

I'm a regular on the Stagea section of the forums as thats what I drive, but I wanted to ask a question to all the skyline owners out there.

I'm continually getting told by 2 of my brothers who are Ford fanatics that the Aussie cars, ie Ford falcons are more reliable than the japanese imports because #1 they have a good motor (me starts laughing) and #2 there are loads of fords (and holdens) out there with 300,000 or even 400,000 km's on the clock and still going.

They tell me that skylines/stageas etc just wont last that long. I very much doubt they are right but I thought I'd pose the question and just ask who out there has a skyline or stagea or any RB25 or RB26 powered car that has done more than 300,000 kms?

To me the RB engines and other nissan turbo engines are among the best in the world in their class.

I just thought I'd find out for myself the answer to how long the RB engines will last if treated fairly nicely.

The whole aussie cars vs jap cars thing is a bit like apples and oranges because most import car owners tend to modify their cars a bit, but even so, lets see how reliable they are. :)

plenty of vl commodores (rb30e and rb30et) engines have done over 500 000km, if not more. i think some skylines have done that much but 99% have wound back speedos to the magical 70 000km mark. i know one gtr in perth that has 270 000km on it and still going well. the small capacity engines need to rev alot more to get around and that wears out bearings and rings alot quicker than a 4L ford or 3.8L holden engine. most rb engines would have had a fairly hard life compared with the aussie company cars which are only autos mainly.

thats my useless 2c worth :)

An engine with high specific power won't last as long as a lazy old 4L donk making half the power it rightfully should.

It's a simple case of the candle that burns twice as bright lasts half as long. There are very few well maintained skylines running STOCK power levels. Most people boost them and they wear out faster, simple as that.

I have seen a stockish R33 GTR with 300,000 km on the clock ( who knows if thats genuine). She is still going strong.

Don't expect a 2.6 lt pushing 600-700 hp to last, it wasn't designed for that much power .

I have seen a stock WRX with 450,000 km on the clock, still going strong .

Ok so my bro's probably do have a point there.

Just wanted to put the question out there and see what people had to say.

Its not going to make me buy a Ford in any case as there is more to a car than making it safely past 400,000 kms.

Of the cars I've driven, the Nissan imports give a superior ride and driving experience than the equivalent aussie cars, but thats just my personal opinion.

At the risk of sounding arrogant, I'd rather drive my Stagea for 200,000 km's than drive a Ford Falcon Futura wagon for 500,000 kms :happy: lol.

I dont plan to do too many mods to the stag, so I do expect it to last a long time, hopefully above 300,000 kms. And I'll tell my bro's when it goes past 400,000 i'll take a photo and send it to them. :yes:

my gt-r has had 2 sets of turbos on it original engine( i bought it with dead turbos) the avcr was on 1.3 bar wheni got it. the car had done 130k at the time. ive traveled another 20kays, still going strong, still compression tests at 165 with 3 psi variation max,i really believe it will do 200kays with 270kw at the wheels!! i hope i havent jinked myself though.

  • 5 years later...

If the rb was left with relatively low mods and used as a daily theres no reason why it will break for a very long time, probably longer than the fords and holdens. All you have to look at is rb30 bottom ends over 20 year old motors with 3-400,000 on them and people still just slap them into there hybrid rb builds and pump out 300-350kw still reliably.

Even rb25 from r33's are now 15-20 years old and still go strong running 300kw plus. Theres no chance youll get a ford or holden engine thats 20years old with some km's on it that will take double its power.

Holy crap, how do you find such old threads, aren't they covered in dust under countless old newspapers? :)

On topic, there is no reason a stock RB or any engine for that matter, wont last half a million K's if the owner actually maintains it.

post-63525-0-72042900-1338685823_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...