Jump to content
SAU Community

Recommended Posts

You will be looking at 15 - 16k all up - I got my s2 R33 for 17500 (incl rego etc). My opinion would be to keep looking - although aside from the steering and the gear shifter, the car looks very neat.

Id say, if you can get the car up, check for leakages and all around the engine block. The welsh plugs and all the piping for the coolant. Check the belts if you can. Have a look for any rust spots under the car - there was a thread with pics of rusts on r32s - scared the shit outta me.

Dont try RACV. Apparently they dont know how to really check out the engine and all that. Warranty might be worth looking into - check with the seller if he is including warranty with it.

good luck bud ;)

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

and it sounds like you'd be leaving yourself with $0 for things going wrong...probably not a good idea.

This is your major problem....make sure you have it checked out properly.

But having said that ,not many people will go out of there way to look at the thing to make sure all

is well. I agree with the rest $14K is steep. I know some people trying to get $19K for stock gtr32's although the

better examples are around $22K.

Really a bit of advice to you. Take the car for a full once over by either nispro,racepace or any other respectfull

garage, no matter if it takes them 3 hour and $300 later.

The money you could save on repairs could be 20 times that amount.

Get everything in writing ....no......i'll get that fixed no problems.

The old saying is so true..........buyer beware.

Get everything in writing ....no......i'll get that fixed no problems.

The old saying is so true..........buyer beware.

GREAT POINT!!!!

Everything he said he will fix, put it down on paper and you both sign, with a witness :whistling:

Even ask how he intends to cover the holes in the boot lid. If he is just going to bog it up don't accept it. The hole need to be filled properly and only a minimal amount of bog used. Put this down on paper too.

Even ask how he intends to cover the holes in the boot lid. If he is just going to bog it up don't accept it. The hole need to be filled properly and only a minimal amount of bog used. Put this down on paper too.
Car comes with a GT wing but he can swap it for a standard r32 wing and bog/respray the existing holes for free. P

Ill be calling the seller tomorrow and tell him $13k with rego. He is asking for too much considering there is no warranty. He had a white one for sale for $15,500 but dropped it to $13,500 couple of weeks ago. He will drop this black one down soon enough.

Intercooler fan? Maybe its for the drink cooler in the glovebox? Believe it or not it was an option...

Anyway, it looks like a great car (from the other side of a computer screen). If you can get it for a bit cheaper, good on you.

But then again if you are happy with the car and it is the best condition one you have seen, it may be worth the extra $1k. As I'm sure others will agree with me, buying a good quality car in the first place is the key to being happy with your purchase.

I bought my R32 GTSt 3 years ago, was absolutely the best one out of the 20 or so i had seen (and 5 or so i had seriously considered and driven). I paid $16500 back then. And I dont regret it at all, I havent had a problem since...

I don't understand why you wouldn't get a SII R33 for around $2k more including RWC & Rego... you'll be getting a newer car.. ANYWAYS..

Compression test <- important I think..

FULL TANK OF FUEL <- $100 saving later on down the track

Take it for a decent drive <- make sure your happy..

Get an inspection <- combined with point 1..

Start it when it's cold <- make sure they aren't starting it and warming it up before you get there..

Remember you've got insurance to pay + better tyres once you've bought it.. Steering wheel looks crap as well, get that replaced.. what about the brakes? get the rotor's machined..

thanks for all your input, although Roy's may be a bit out there :)

In regards to the choice of the r33, it is easy to say just another 2grand. But just another 2grand ontop of that could get a r34 and so forth. Also the r33 is illegal for P-Platers and living 5 mins from knox i dont think it would be a good idea :yes: I just like the look of the r32 so its really preference.

When i first arrived I asked him straight away if the car had any probs with cold starts. He told me to go touch the motor and to feel that its cold. What i might do is call him and offer him $13,000 without the bov and any wing. Seeing as that should add up to be $500~ Many R32 gtst owners are selling their wings on this forum so it shouldnt be a problem.

If I take the car as is, that gt spoiler will leave about 12 holes in the boot :) including the other 2 holes from the stock spoiler.

He did the compliancing himself so he should have made money regardless if I brought the car to him for compliancing. He was selling a white r32 for $15,500 but then dropped it to $13,500 after a couple of weeks. A week waiting shouldnt hurt. :D

Althought he told me that he knew SAU so he could be reading this thread hehe.

Thanks

I just got in contact with him and told him that I've only got $13k and suprisingly he accepted? Thats 13k AS IS with the boot holes and some scuffs around the car.

If i get the stock r32 wing ill have a lot of holes from the gt, if i get the gt ill only have 2 holes from the stock wing.

Is it still worth $13k cause i need to call him back and accept :wave: haha

Boot Lid:

dscn2511mediumce7.th.jpg

dscn2525mediumsk7.th.jpg

sounds like this guy is the 1 calling the shots, and not you...

$13k as is, or $14k with all the shit you listed fixed....

Hmmm...

It wont take $1000 to fix all the problems? Only problem is that scuff mark and boot holes which is just cosmetic. Thinking of going spoiler/bov-less and getting him to cover rego. Any thoughts would be appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2025 PRP GTR Festival - A Massive Thank You from SAU NSW! On behalf of SAU NSW, I want to extend a huge thank you to our incredible committee for all the hard work and dedication behind the scenes. You are the engine that keeps this club running smoothly! (hopefully an RB lol😆) To all our amazing volunteers who helped make the GTR Festival Sydney such a success, thank you for giving your time, energy and sacrificing your weekend sleep-ins. Your efforts did not go unnoticed and were absolutely appreciated by everyone. We also want to give a big shoutout to the workshops, trade stalls, and the awesome VIP's we connected with over the weekend. Your support means the world to us, and we’re so proud to be part of such a passionate automotive scene. We are looking forward to collaborating with you at our future events.  SAU NSW had our marquee up for two full days at GTR Festival, packed with merchandise, a sizzling members BBQ, and a chance to chat with the committee, sign up, and check out some hot Skylines on display from our members. It was incredible seeing so many smiles and genuine conversations, that's what we're all about! SAU NSW is more than just a car club... we’re building a community where you can make friends, share stories, and talk about anything RB related or not. 📸 Please post any cool pics you took at the GTR Festival in this thread! 📸 To our current members, thank you for your ongoing loyalty, and to all our new members... welcome to the family! We’re beyond excited to have you on board! Please ensure you are involved as much as possible within the club, and make the most of our exciting upcoming events. Here’s to more future events, thrilling drives, chill meets and good feeds! Let’s keep building something special. 💪🚗💨 Matt Zoumpoulis, President SAU NSW
    • Yes, well, keep in mind that the air is intake air, which equal boost + possible oil. If there is a fine deposition of oil/scunge that then gets hot and carbonises, it could look just like that. Probably shouldn't be leaking. Might just be normal for that product. Hard to know if it is relevant.
    • Wrapped up putting the motor back in today. I have a stainless flex turbo drain pipe like you see on cummins and that funny enough PRP started selling. I generally prefer these but sadly they come with a finite amount of times they can be bent before they snap. Took well over a week for a replacement to arrive.  I was able to prime the pump but I will more then likely wait until next friday to take it on its madden voyage. I also installed the nozzles for my direct port WMI setup but plugged the nozzle holders for now. I'll tube it with Swagelok SS tubing and fittings next chance I get. No rush, i'll be breaking it for a week or two anyways. 
    • I could definitely do some logs without the VCT enabled for sure. I believe we tried it on the dyno and it still spiked but wouldn't hurt to try again and have the logs    I might be able to use some metal cable ties and hold the gate open entirely, I'd need to see about that one.   What do we think about these marks on the cap of the actuator? This is where the two parts push together where the diaphragm spring is. To me they look like air has been sleeping past?? Specifically talking about those black stains above the lower rim/lip. They can be rubbed away as if it's just an exhaust stain.  
    • And if it still spikes, just for now, turn off VCT completely by disabling it OR simply unplug the solenoid. Just to rule out excessive exhaust pressure. I recall a video from Motive DVD about a decade ago, where Hawkins original single Garrett GTX3582 or so turbo had boost control issues sub 1.4bar of boost as well.   Food for thought? Is there anyway you can peg the WG completely open and/or dodgily not plumb it back into your exhaust system for testing purposes?
×
×
  • Create New...