Jump to content
SAU Community

Recommended Posts

  • Replies 245
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You're in the list, justin911

Thank's predator, first post updated. I checked with DBA catalogue, R32/R33/R34 GTSt all used part no 908 so they're all same.

marz13, as I said it's my estimate but I could be wrong. I am basing my estimate from the price I was given for front R33 slot and rear. But those ones are R33 gtst prices. For R32 GTR which uses 324mm it may be a lot higher. However for comparison, a mate of mine got his front slot R33 gtst rotor for $310 a pair, while I am offered $275 plus GST (or about $302.5 incl GST) for fronts. This does not include group buy discount, so if 20-25% less a pair of front R33 gtst is between $226 to $242 a pair.

r33 gts-t = 296mm, Z32/r32 gts-t = 280mm - Fronts

rears are the same.

I'm keen on a set of 280mm slotted/dimpled depending on the price.

I'll put you in as well fly510

put me down for a pair of front slotted rotors for r33 gtst. but it does depend when the gb closes... its looking good so far... if it starts to look like more than a fortnight from now i may get some rears too...

Freddy Krugger, list updated.

GB is looking good. The guy at RDA told me that since they have branch in every city, they may organise to drop off the discs to their branches so ppl outside Melbourne can pickup at their nearest city. Otherwise he hasn't told me yet the exact price but for a local delivery should be reasonably cheap. I had my set bought on ebay shipped for $15~30 from memory, and that was from NSW to VIC.

Dezz, the prices so far I had is on the 1st post, just reduce by 20~25% off to get the group buy price. Hard to get exact at the moment as I am still opening this EOI list until end of the week to get the maximum qty possible, then we'll see how much RDA is willing to give discounts. I had asked him a few questions about all the prices but so far he hasn't given me a full RRP list yet.

2face - you're in

Shane, I'm sure no probs as it's in the Nissan-D.xls list in the first post. Under S series 200SX, S15, part no 909 is the same for S14

Just this week I began hearing the familiar and dreaded sound of worn pads. Bastard thing wants MORE money.....it's worse than having a teenage kid!! ;o))

Depending on when the group buy ends, you could put me down for a set of slotted fronts (possibly slotted rears as well). Will be getting the disc runouts checked tomorrow.

Cheers,

Mike

Hi,

Can u change my order to just slotted rotors front and rear for R32 GTR,

Thanks

prelude :

no problem

r33fourdoor :

i'll put you in as 1 pair fronts.

i'm leaving this eoi thread til saturday/sunday then i'll bring the approximate numbers to RDA and see if we can get the 25%off or even better but I doubt so, 25% pretty darn good already. then i'll start to finalise orders the following week and organise payments and logistics, as well as allowing more ppl to jump onto the bandwagon.

Can you pm me the expected pricing for front and rear slotted rotors for HCR32 please.

Blitz, std slotted price are on first post of this thread. Most likely R32 also uses the same dimension with R33 so it'll be about $300 for the front pairs and $190 for the rear. Add this up $490 for a set of 4, minus 20-25% discount you can expect roughly in the range of $370-390.

There's a Nissan D.xls spreadsheet on first post, you can have a look if your dimension is the same with R33, then that price on 1st post will be spot on.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...