Jump to content
SAU Community

Recommended Posts

Booked in my r32 gtst for a $14 pedders suspension check, seeing as I've only had the car for a week would like to know if there are any problems to be fixed.

Results were:

Shock absorbers:

Left front: 27

Right front: 27

Left rear: 22

Right rear: 24

Pedders stated new shocks are rated 22, so nothing needs to be fixed there.

Only problem were:

Upper inner bushers worn $137

Slight play lhs mounts moving

LAB $132

Wheel align $55

Total ~ $324

Should I go ahead and book the service with pedders?

Also spoke to the person about pedders extreme suspension vs japanese made, he says pedders australian built and made for aus conditions plus not as stiff as imported :(

Thanks

- Patrick

Link to comment
https://www.sau.com.au/forums/topic/132237-pedders-suspension-check/
Share on other sites

what is a LAB?

For inner arm bushes you should check out whiteline or notlec adjustable camber bushes.

Alignment price is good for a 4 wheel alignment but make sure you get the other work done first

Pedders charge $110 for a 4 wheel alignment.

The above quote is just the front wheel alignment

For bushes & your suspension needs its hard to go pass Whiteline items. Also, if Pedders had some idea about the Skyline they would of advised you to have a 4 wheel alignment done. SydneyKid has listed - Centeline Thomastown; & Traction Tyre & Suspension Rowville, as reputable suspension places in VIC.

I took my GTR into Pedders up here for the $14 check & dropped a few comments as hooks-in-the-water to see if they'd bite & yep, they sure did!!

Firstly they wouldn't let me in the workshop to SHOW me what needed to be replaced, which to be fair is the letter of the law BUT then they came back with a list of needing to completly dis-assemble the rear-cradle & replace all the bushes along with the front steering-rack being shot & needing to be re-built or replaced. Stupid $$$ & 2wks later I could have my car back.....

I then took it to a mates workshop & put it on the hoist. The car needs a RH front tie-rod end, a front CV-boot & not a lot else. Whilst the rest isn't brand-new, it doesn't need replacing right now either.

Anyway that's my experience, make of it what you will

that's pretty cheap. most good place i know charge between 100 and 150 if we are talking:

adjust front toe

adjust rear toe

adjust front castor

adjust front camber

adjust rear camber

that's a fair bit of stuff to do, and after doing camber things must be checked again as it can affect castor. and after doing castor another check is required. so it takes time.

I took my GTR into Pedders up here for the $14 check & dropped a few comments as hooks-in-the-water to see if they'd bite & yep, they sure did!!

Firstly they wouldn't let me in the workshop to SHOW me what needed to be replaced, which to be fair is the letter of the law BUT then they came back with a list of needing to completly dis-assemble the rear-cradle & replace all the bushes along with the front steering-rack being shot & needing to be re-built or replaced. Stupid $$$ & 2wks later I could have my car back.....

I then took it to a mates workshop & put it on the hoist. The car needs a RH front tie-rod end, a front CV-boot & not a lot else. Whilst the rest isn't brand-new, it doesn't need replacing right now either.

Anyway that's my experience, make of it what you will

Mate you could take a new car their and they would say it would need changing. :P

When the inspection was finished, they left my car on the hoist and asked me to follow him into the workshop. He then showed me what was wrong and what needed to be fixed, then lowered the car and printed out the invoice etc.

Havent done anything yet, looking around at other options.

Thanks :)

Pedders and my local import speciallist gave me an identical list of suspension issues, so I figured that what they were telling me was reasonable. Always get a second opinion if you think you're getting taken for a ride!

Or could it be that Pedders and my mechanic are conspiring against me?!?!?!

Pedders and my local import speciallist gave me an identical list of suspension issues, so I figured that what they were telling me was reasonable. Always get a second opinion if you think you're getting taken for a ride!

Or could it be that Pedders and my mechanic are conspiring against me?!?!?!

Mate you never know.

These pedders outlets are franchises and i spose its the luck of the draw of which one you take it too.

They probly get a 6 week training course of how too rob people legally and get thrown into the business without a clue. Some pedders may be good depends on the owners. All they want is profit which im sure everyone wants, but not robbing people they way they do it.

My experience never go back.

Edited by subzeroR33

But wouldnt Joe Blow who "specialises" in Skylines and other imports would wonna rip you just as much as Pedders in this case? At the end of the day, everyone wants to make money. If you really want to save a buck, become friends with a mechanic and get him to check your car over, this is the only way.

My family friend mechanic told me today that you dont need to machine all disk rotors when changing brake pads... often its not needed at all but 9/10 places will tell you to do it, why? more money for them.

I cant imagine how much chicks get ripped everytime they service their cars...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...