Jump to content
SAU Community

Recommended Posts

Hi there,

I am very interested in the R33 GTR xenon type lights. I have a pic attached for those who arent sure about what im talking about. Just wanted to know whether these lights would fit onto an R33 GtsT? any help would be great

thanks.

post-11487-1156923185.jpg

Edited by SLYLNE
Link to comment
https://www.sau.com.au/forums/topic/132270-r33-gtr-xenon-lights/
Share on other sites

Hi there,

I am very interested in the R33 GTR xenon type lights. I have a pic attached for those who arent sure about what im talking about. Just wanted to know whether these lights would fit onto an R33 GtsT? any help would be great

thanks.

Apparently not. You need to get the fitted properly, it aint a simple "remove and fit" job.

Also they cost 2K!

Firstly, sII is a very difficult fit. The bonnet/front bar is actually a different shape.

SI i beleive can be made to fit quite easily, because the headlights are the same shape. the brackets are slightly different, so will require slight mods. the grill probably won't bolt on, but that's fine, just get a gtr fibreglass grill for $100.

I've actually sourced a set of gtr xenons from japan and they're coming in. Don't hold your breath waiting for me though, i'm very busy with uni atm.

Thanks for your help guys,

also what difference is there with the S1 GTR and SII GTR headlights?

No difference at all, series III are a little different besides the fact that they are projector xenons.

Any R33 Gtr H/lights will fit series I ( only S I) but you have to modify them a little to fit .

You have to take off the rear spacers ( easy to do) and they dont have a bottom braket where they fit on the grill .

lolz..nah not 2k, i think itz around 600bux for the two.

If you can get them for $600 per pair, ill buy them of you for $800 and you can make $200 a pair .

They sell for over 100,000 Yen used !

Yep, in all my searching I saw one complete set with ballasts and bulbs for about 800 delivered, the rest were exxy.

That would have to be around the 50,000 yen, I would say there was something wrong with them at that price ....

I agree with wrxhoon. I paid about 2k landed for mine. I looked ages for some, the cheap ones were usually damaged or didn't come with ballasts or were the series 1 with retrofitted HID bulbs (crap)....

If you can get them for under 2k landed you've got yourself a good deal.

When retrofitting the S3 lights to a S1 or 2 GTR, do they plug straight in, or is a rewire of the headlight loom needed aswell? Some where down the track i'd like to fit these to my GTR, standard headlights are terrible.

When retrofitting the S3 lights to a S1 or 2 GTR, do they plug straight in, or is a rewire of the headlight loom needed aswell? Some where down the track i'd like to fit these to my GTR, standard headlights are terrible.

Nothing wrong with the standard S I+S II GTR h/lights mate . Make sure you get the full 13.8-14 volts on them and they light up very nice( they are never going to be like genuine xenons though). In my old 33 i wire them with a rely and made the lows stay on when the h/beams went on as well, excelent light .

When retrofitting the S3 lights to a S1 or 2 GTR, do they plug straight in, or is a rewire of the headlight loom needed aswell? Some where down the track i'd like to fit these to my GTR, standard headlights are terrible.

They pretty much plug straight in. You will have to file/cut the plug very minor to get them to fit, the plug is the same shape, but has the 'guide' lines in different places... just cut/file them away and it fits perfect.

  • 8 months later...
Nothing wrong with the standard S I+S II GTR h/lights mate . Make sure you get the full 13.8-14 volts on them and they light up very nice( they are never going to be like genuine xenons though). In my old 33 i wire them with a rely and made the lows stay on when the h/beams went on as well, excelent light .

G`day mate

Can you please help. I`ve finally found genu. R33 GTR Xenons headlights for my baby, but they have no bulbs or ballasts. I cant find exact info. so i can purchase them. I`d like to go as similar (specs) to OEM as possible.

Any help much appreciated

Regards Martin

Agreed. A set went for 101,000 yen last night and that would've been a very good buy at that price. It was a bargain. that equals about $1200 - $1500 landed depending on your buyers arrangement.

Lol just read this threads from 2006... oh well.

G`day mate

Can you please help. I`ve finally found genu. R33 GTR Xenons headlights for my baby, but they have no bulbs or ballasts. I cant find exact info. so i can purchase them. I`d like to go as similar (specs) to OEM as possible.

Any help much appreciated

Regards Martin

Well you can buy Nissan ballasts and bulbs if you're keen. They might be expensive but it's worth a shot:

Ballasts (ACTUATOR ASSY-HEAD LAMP) 26055-98U00

Xenon Bulbs (BULB-XENON) 26297-89901

You will need a series III GTR VIN number in order to order parts for these. Here's one i picked out of the air that turned out to be valid: BCNR33-043434

No idea where you are but if you're in Sydney order Nissan parts from Crows Nest nissan parts counter or Hornsby nissan parts counter for best chance of success.

Good luck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...