Jump to content
SAU Community

Big Up For A & B Motorsport In Brookvale !

B-Man

By B-Man,
in New South Wales

 Share

Recommended Posts

B-Man Grand Master

B-Man

Posted
Posted

As you may know - I have my fair share if 'interesting' experiences with mechanics & workshops. So when I go to one that give me outstanding service and quality of product (and price) - I like to share the goodness !

So the story goes:

Went looking for some coilovers for my TX3 race car project. A member of TeamEunos (like SAU but for Mazda/Eunos/Cosmo etc) recomended that I try A&B Motorsport in Brookvale.

Talked to Frank, the owner, and he showed my his inverted race coilovers with adjustable everything (damper, height, camber, etc) - they were a good price, so I told him that I'd think about it !

Whilst there - I noticed some 8 piston calipers with massive rotors and I asked him about them for the Cosmo - Although they didn't have a specific kit for the Cosmo - he said he could make one up for me. He also told me that I I took the coil overs, that he would fit the brakes for a good price.

So I went with the deal. He spent 2 days getting the brakes 200% right ! Didn't charge me for the 2 days and he had to make new brackets, and spend a bunch of time with different types of rotors to get the right offset etc.

As an example - the original wheel studs with the new rotors meant that the wheel nuts would only go on 80% - Most other workshop would have just left it at that - But being particular about his work, he hunted down 10 new studs that were 10mm longer that the originals - so that the wheel nuts went on fully and then some !

Very happy with the final result ! 8 Piston calipers, braided lines, all fluid changed, 330mm slotted rotors - It stops like a demon now !

I liked the coilovers for the TX3 - and asked about the Cosmo - again, no specific kit - but he would make one up - Sure enough - Got the car back - and perfect ! Sits lower - he got all the adjustments/allignment and stuff spot on 300% perfect. Ride is firm but comfortable and the car looks a hell of a lot better sitting lower and with the big brakes on the front !

So a big UP to Frank and Rob at A&B Motorsport in Brookvale !

Give them a hoy - if you are after brakes, suspension, etc - They also have a dyno - they don't tune yet - just power runs.

Cheers,

B-Man Grand Master

B-Man

Posted
  • Author
Posted

Suprisingly not !

My old rotors were warped - and the Cosmo come with tiny rotors and single pot calipers. So I investigated options - The best and most affordable option was 2nd hand FD RX7 Calipers with RX8 rotors. I figured about $2000-$2500 for this - Also there was a bit of machining and mucking around for this conversion.

Both Calipers, 330mm rotors, braided lines, fluid and pads, including fitting cost me $2,500.

Before the upgrade - front to left difference in pressure was 9% - Now it is less then 1%.

The brake kit is designed in Japan and manufatured in Taiwan - Brand is K-Sport ! (Similar to the ones Just Jap sells) but these guys are a workshop so any non standard stuff or hard to replace items (eg for a Cosmo) - they work out how to do it !

Very Happy !

Blitz Grand Master

Blitz

Posted
Posted
Suprisingly not !

My old rotors were warped - and the Cosmo come with tiny rotors and single pot calipers. So I investigated options - The best and most affordable option was 2nd hand FD RX7 Calipers with RX8 rotors. I figured about $2000-$2500 for this - Also there was a bit of machining and mucking around for this conversion.

Both Calipers, 330mm rotors, braided lines, fluid and pads, including fitting cost me $2,500.

Before the upgrade - front to left difference in pressure was 9% - Now it is less then 1%.

The brake kit is designed in Japan and manufatured in Taiwan - Brand is K-Sport ! (Similar to the ones Just Jap sells) but these guys are a workshop so any non standard stuff or hard to replace items (eg for a Cosmo) - they work out how to do it !

Very Happy !

Sounds good B-Man.

K Sport are exactly the same as G4 Racing (only the G4 kit is a little cheaper)

All the reports I have heard about G4 have been outstanding in terms of braking performance, particularly on the track! :)

rukus Grand Master

rukus

Posted
Posted
Sounds good B-Man.

K Sport are exactly the same as G4 Racing (only the G4 kit is a little cheaper)

All the reports I have heard about G4 have been outstanding in terms of braking performance, particularly on the track! :)

really?

nice... i need new brakes and was wondering what G4 were like..

B-Man Grand Master

B-Man

Posted
  • Author
Posted

Yeah - they are the same as G4 - However, in my case - if I had bought the kit from JJ, then got an adaptor made, new studs and all the labour - I reckon I ended up paying heaps heaps less !

They are awsome brakes ! absolutely briliant compated to the standard cosmo - there is no comparison !

T04GTR Grand Master

T04GTR

Posted
Posted

yep they are pretty cool. i bought som lk-sport coil overs and mucked around with springrates and they were fine with it. also both my rear dampers exploded(pulled the seel in and leaked everywhere) they replaced them no questions asked :P still in warenty but yeah .

i had to turn down the funny spaarkplugs and wierd vortex intake lol

Beer Baron Grand Master

Beer Baron

Posted
Posted

good man. especially if he had press studs on the back of those jeans. i'd he-bitch man slap him. apart from that the brakes look massive, and i like the wheels. good choice bman.

nfi Community Regular

nfi

Posted
Posted

Very nice! 8 piston just adds to the bling as well.

Have you investigated what pads the calipers support? I am guessing porsche?

Bman, to say you have had your fair share of dodgy dealings is a gross understatement :blush: Luckily for SAU club members you have taken enough bad luck to cover the 'team'....... I mean club :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...