Jump to content
SAU Community

Lightweight Flywheels For 32 And 33 Gtr And Gtst

Beer Baron

By Beer Baron,
in Group Buys

 Share

Recommended Posts

simmyb Community Regular

simmyb

Posted
Posted
Can someone start a list off who is in?

I have no idea how many people are in but apparently we need atleast

10 people..

Also, does any1 know where the High Tensile Pivot go's?

yes, list and info please...?

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

will start the list shortly.

The high tensile pivot screws in to part of the box, then the clutch release fork pivots on it. They are a known failiure point, especially when you are using a clutch with a high clamp load, so the high tensile ones are worthwhile.

The needle roller sits on the end of the input shaft, it's obviously a much better bearing type than the bronze bush that is in there from the factory.

I can't really comment on the strength of the super light flywheel, as I dont know enough about what R+D has gone into them. I will say this, all the flywheel failures I have heard of and seend were either factory flywheels, or 'lightened' factory flywheels being used with upgraded clutches. I would still choose a new, chrome molly lightweight flywheel over an old, cast factory one. I would hope that these are 'fit for purpose' and I'm pretty sure they would be.

NV N01 Experienced

NV N01

Posted
Posted

Is there any special Clutch and Pressure Plate we have to use with these?

Or can I just use a Heavy Duty Clutch and a 2.5t Pressure plate? (Standard Replacement)

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted
Is there any special Clutch and Pressure Plate we have to use with these?

Or can I just use a Heavy Duty Clutch and a 2.5t Pressure plate? (Standard Replacement)

nope pretty much any clutch should be fine. :)

eug, no worries, will take you off.

R

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

just a quick update. there was a little set-back at UAS with a massive fire on the shop above. Everything should be pretty well back to normal tomorrow so I'll get up the payment and order details together tomorrow. :laugh:

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

ok guys. time to get payment happening:

All you need to do is go here: http://www.nismo.com.au/order_form.htm

And fill out the details (put Beer Baron group buy, or SAU group buy), put down what you want, and use the prices from my first post to get yourself a total.

then send through the order direct to Unique Autosports and they will sort you out.

Any questions about delivery time etc they will be able to answer for you no problem.

Fixxxer Community Regular

Fixxxer

Posted
Posted

Ok, well anyways, I just sent through my order for a super light chrome moly flywheel (4.8kg) $450 + $30 freight.

Hopefully this will go a long way to getting better off boost response from my R32 GTST. Ohhh and I get to throw in the new clutch while I'm at it.

Fixxxer :yucky:

Fixxxer Community Regular

Fixxxer

Posted
Posted

Hey guys, as Beer Baron said, send through your orders ASAP so we can get this group buy going. I called the guys this morning and they are waiting for the group buy orders so they can offer the discounted prices. In other words, they will not send out my lightened flywheel for the discounted price until they have a minimum number of guys paid up.

**Beer Baron, please advise the guys who were in the group buy (off the other forum) to send through their order.

Thanks all,

Fixxxer :(

NV N01 Experienced

NV N01

Posted
Posted
Hey guys, as Beer Baron said, send through your orders ASAP so we can get this group buy going. I called the guys this morning and they are waiting for the group buy orders so they can offer the discounted prices. In other words, they will not send out my lightened flywheel for the discounted price until they have a minimum number of guys paid up.

**Beer Baron, please advise the guys who were in the group buy (off the other forum) to send through their order.

Thanks all,

Fixxxer :happy:

Alright I'll send my order through when I have time..

Fixxxer Community Regular

Fixxxer

Posted
Posted

If you are lookng for a r34 lightened flywheel give the guys a call (you can get their number from clicking on the order form a few posts above here). They may be able to do that and attach it onto this 'group buy', for a good price..... who knows.

Fixxxer :)

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

hi guys. verry sorry for the slow replies. I'm currently in japan and haven't really been on-line much at all. the best thing to do is contact UAS and all questions will be answered. :rofl:

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      GTR-Registry.com Presents: The Stagea Collection (all Stagea VIN/colours/types/options etc)

      By ARB26 · Posted

      Website is down
    • soviet_merlin
      NC MX5

      By soviet_merlin · Posted

      There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...