Jump to content
SAU Community

Recommended Posts

Hey guys, first time posting to SAU but have owned my R32 GTS-t for a year and a half now. i got it from a guy in gelong for 10,700 unreg and all it had was a 3" turbo back exhaust and done 80,000 on the clock. Not bad i would say.

Apart from the police liking to defect it for bald tyres the car has not had one mechanical problem but now I have become thirsty for power and the lack of low down power in the rb20 is becoming more and more annoying every drive so i have a plan.

I have 2 options and want people's opinions on them but first the shoping list:

Strut Braces (F/R) $198

TEIN Super Street Coilovers$1280

TEIN EDFC $650

Kaaz 2way LSD $1050

HICAS Lock Kit $100

Adjustable Camber Arms $300

Caster Rod $249

Pineapples $99

Bushes $150

Whiteline Swaybars $350

Bee*R B5 Racing wheels 18x9.5 $1996

KKR-480 Turbo $895

Xtream Clutch kit $250

Apexi Power FC + FC logit $1500

Greddy Intake Plenum $900

Hybrid Intercooler + custom pipeing $600

Short Shifter $200

Apexi AVC-R Boost Controller $750

Exhaust Manifold $500

Bosh in tank Fuel pump $260

Oil Catch Can $80

Battery Box $25

Surge tank $200

GTR Injectors $500

Bucket seats $400

The options:

1: RB25DET Neo conversion, hence the project R32 GTT(im not just some fool who dosent know they changed the gts-t to gtt in the 34's) the pro of this is that it will be a good base and already having 206kw, with all the extras on it will with out a doubt forfill my power thirst. the Con's of this is that finding one with evrything i need was harder than i expected, The laber will cost a bit and the engieners cert.

2: RB24 hybrid, i read about thin a HPI Mag and a mate sugested it cause not only will the RB20 become an brand new engine but with forged pistons i would be able to pump in as much boost as the turbo can handle and no need for and engine cert. Cons are as good and unique as the RB24 will be there will always be limits to the out put that the engine can make and i dont want to over stress an engine that cant make the power comfotably. also rebuilding the engine wil probly coast the same as a conversion.

so there are my ideas please post you views, any other things i may have not know or what you think would be cheeper and better. thanks all

.:Rifleman:.

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/
Share on other sites

you will encounted alot of little fiddly problems along the way if you decide to go down the rb24 path as it is not a usual upgrade people make to their 20's and im pretty sure there would be a fair bit of machining work etc that would need to be done due to the new clearances. If i remember correctly HPI even changed their engine builder at one stage during their build-up. An rb25 is a much more well know, tried and tested way of bagging good results. You should speak to the workshop you take your car to and ask them their opinion as they are the ones that will have to do the work in the end.

Good luck and make sure you keep us informed as the build process gets going!

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2570119
Share on other sites

An rb25 is a much more well know, tried and tested way of bagging good results.

I agree, and I know of ppl who have done the conversion and got a certificate from nissan saying the rb25det came out in the r32 skyline meaning no need for engineers certificate. Its less likely to have complications and as above, is a proven way to get good results...all the best

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2571175
Share on other sites

I know of ppl who have done the conversion and got a certificate from nissan saying the rb25det came out in the r32 skyline meaning no need for engineers certificate.

how and where did they do this cause i am all for saving cost's. engineers cert means i have to at least do a brake upgrade and thats an extra 2000 if done right.(the only way i would do it)

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572241
Share on other sites

I Also cooked up another idea last night (I tend to do this often, im a security guard and sit on my ass for 12 houts a night) about useing a RB25DE Neo that are $1000 and add forged pistions & rings for $1200 and building it in to a DET. thet means i can throw the DE in, get a engineers with out needing brake upgrade cause there is no added power. also internals would be stronger for more boost. I am not sure how hard it is to turn a DE to a DET so I must read up on this. anyone with expirence please post

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572243
Share on other sites

I Also cooked up another idea last night (I tend to do this often, im a security guard and sit on my ass for 12 houts a night) about useing a RB25DE Neo that are $1000 and add forged pistions & rings for $1200 and building it in to a DET. thet means i can throw the DE in, get a engineers with out needing brake upgrade cause there is no added power. also internals would be stronger for more boost. I am not sure how hard it is to turn a DE to a DET so I must read up on this. anyone with expirence please post

In theory that is alright if you're changing everything like injectors, but I believe that the de injectors are smaller, so you'll have to factor that into the budget too.

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572581
Share on other sites

Or you could just upgrade the brakes... you'll need R34 GTT brakes if you are using the Neo engine, they arent very expensive, and you can sell your r32 gtst brakes to some S13 hoon too.

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572704
Share on other sites

Or you could just upgrade the brakes... you'll need R34 GTT brakes if you are using the Neo engine, they arent very expensive, and you can sell your r32 gtst brakes to some S13 hoon too.

Good point but the brakes im trying to bypass at the moment, they will come after the engine work

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572709
Share on other sites

If you want 250rwkw, and not spend too much money. Go for a RB25DET (from a R33 GTST) + turbo of your choice.

250rwkw is a guess at what this engine will make, i hope i am very suprised in the end and i have never been a big fan of R33's nothing against them but i wanted to go for a newer engine and the more kw i have to start with the more i have in the end. also i wanted something unique, every one wants or has a RB26. it also seems like overkill to me for the power output. if i was chaseing 1000kw then maybe but im not.

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572735
Share on other sites

If you want 250rwkw, and not spend too much money. Go for a RB25DET (from a R33 GTST) + turbo of your choice.

Have to agree with this much cheeper than the NEO, go something like a gcg highflow for the turbo and add some tomei poncams. As a base the NEO is not much better really

Link to comment
https://www.sau.com.au/forums/topic/138043-project-r32-gtt/#findComment-2572877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...