Jump to content
SAU Community

Recommended Posts

ok i got my catch can from just jap the other night. installed it today n went for a small hard drive just on low boost. n its already filled it up to about a little over half full. prolly about 500mL. sound like screwed piston rings to you blokes. also i have an issue sometimes where while im driving the car will just cut out n eventually it comes back alive. this seams to happen when going for a hit but i got a guy to follow me n when it happens no smoke comes out the pipe or anything.

Any ideas.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/141738-catch-can-installed/
Share on other sites

You sure its been installed properly? Did it burn alot of oil before hand?

ye the install is as follows.

if u look at motor from front of car u have left and right rocker covers. the input to the can is taken from the breather coming out the top hole on the right rocker cover and then goes throught the tank and back out where it used to be installed. can somebody tell me if this is correct if not give me a step by step listing and pics if possible on how to do it. cheers

Yes was using alot of oil before but it was just filling up the intercooler.

Was burning oil but not at the moment as its catching in the can. but fills up rather quike

Oil Pressure is fine according to the gauge.

Cheers

i have had my catch can installed for over a year running around 17-20 psi of boost. opened up my catch can the other day and there was nothing inside it.. is this a bad thing? i expected a lil something??

well i think it depends on whether u have it re-circulating back into the sump or not. mine is just a can that catchs it before going to the inlet pipe. what happens if u plumb it so it goes to the sump again. i think there is a pipe u can split n put a t piece on. would this screw up ur pressure though. also i was doing some more testing in the wet today just doing some sideways stuff to see what would happen n the motor was cutting in and out on me. does this sound like maybe a ignition problem rather than a oil thing?

coil packs? i dont want some retard going on about performance plug packs from splitfire because i dont understand how some little company thinks they can do it way better than nissan can. whats the purpose for changing these coils. is it simply because they are way cheaper and still offer a good run? can somebody tell me if this is the usual symptoms of my motor cutting in and out at high rpm. it will cut out then instantly start again.

Cheers

sorry for going a bit off topic.

By cutting in and out do you mean misfire? The splitfire coils aren't neccessarily better, they are exactly the same as stock, however they are brand new, not 20 years old. Hence the better performance. Higher boost then stock and aged cracked coils means a weaker spark that can get blown out at high rpm. Try gapping your plugs down to .8 and then .6 and also try glueing/taping your stock coils up. Theres lots and lots of threads on this go have a read. Should be able to fix your problem.

By cutting in and out do you mean misfire? The splitfire coils aren't neccessarily better, they are exactly the same as stock, however they are brand new, not 20 years old. Hence the better performance. Higher boost then stock and aged cracked coils means a weaker spark that can get blown out at high rpm. Try gapping your plugs down to .8 and then .6 and also try glueing/taping your stock coils up. Theres lots and lots of threads on this go have a read. Should be able to fix your problem.

cheers rolls so i take it they are pretty much the same thing at half the price or something would that be correct?

callum

ok i got my catch can from just jap the other night. installed it today n went for a small hard drive just on low boost. n its already filled it up to about a little over half full. prolly about 500mL. sound like screwed piston rings to you blokes. also i have an issue sometimes where while im driving the car will just cut out n eventually it comes back alive. this seams to happen when going for a hit but i got a guy to follow me n when it happens no smoke comes out the pipe or anything.

Any ideas.

Cheers

Half a can!!!!!!!!! You got problems, I wonder if somebody installed an incorrect [or installed it in reverse] head gasket or something, it sounds like your flooding your head/rockers with oil and its not getting back to the sump quick enough. Something is stopping it draining/flowing back. I don't go with the blown motor theory, you would definitely know if it was blown that bad.

Take it for a drive and then look in your rocker oil cap and see if its swimming in oil or just wet??

Could be a bad instal or a bad quality catch can. My mate had trouble with his coz i think the hoses were too small or some sort of pressure was wrong. Not sure tho

how can a catch can be bad? it's only bad when it has holes in it and leaks crap everywhere.. even a sealed milo can could be a catch can. :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
    • I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
×
×
  • Create New...