Fresh Rebuild, No Spark No Fuel

[Waders]

Motor cranks but theres no spark, we tested the actuator it seems to be alright. Im gonna test the coilpacks right now.

the thing is when we pull the spark plugs out and ground on it on the block, crank the engine and the spark plug doesnt spark.

I checked the igniter, it seems to be alright.

also when we undo the plug it doesnt smell like fuel as been in there.

Could it be something that is cutting the fuel and ignition?

Is there something else im missing? Someone have a diagram of the connectors?

[r33_racer]

got the plug for the igniter plugged into the loom at the back of the head properly, same with the injector loom and injector plugs...have you checked the line for fuel coming out while cranking, if not perhaps pump, maybe fuse gone?

[blind_elk]

Check fuses (under dash) and relays (in engine bay). Check that the 2 relays behind theECU are switching when IGN -> "ON".

You should be able to hear the fuel pump priming at the initial IGN -> "ON".

[AzzurrA]

simple question - you have the ECU plugged in (properly) don't you?

no ecu = no fuel pump and no ignition...? Just food for thought

[C_DawG]

Pull the CAS off and turn it slowly by hand while the ignition is on reds, are injectors ticking slowly?

[grim32]

Pull the CAS off and turn it slowly by hand while the ignition is on reds, are injectors ticking slowly?

Thats where i would be looking first, make sure its plugged in properly.

[Craved]

double check the fuel lines are on the correct way too

[blind_elk]

double check the fuel lines are on the correct way too

But he would have spark.

[Dahtone Racing]

immobiliser?

[Craved]

But he would have spark.

too meaning aswell, since he has no fuel either.

[700HP-GTR33]

Check your voltage on the battery.

[Waders]

We took the cas off and turned it slowly, the injectors were clicking.

It might be the power transistor(ignition module), ill test it and let you guys know

Thanks alot

[Duncan]

there is a small earth wire on the ignitor module make sure that is earthed properly to the cam covers.