Jump to content
SAU Community

Recommended Posts

Ok, so i have my baby back from Tunehouse in Marrickville. My car went from 140.9rwkw, now i have 204.5rwkw. My torque figures went from 1027.2Nm @ 5196rpm to 1518.3Nm at 4473rpm. very happy with the results. i also replaced the oxygen sensor, now i just have to hope the fuel economies are better...

My mods are:

3.5" turboback stainless Xforce exhaust

Apexi Pod Air Intake

GFB Stealth FX BOV

GFB Atomic Boost Controller

Front Mount Intercooler

Apexi Power FC

That is very decent power from the mods listed.... Interesting..

  • Replies 135
  • Created
  • Last Reply

Top Posters In This Topic

Kennedy,

I stuck with my turbosmart single stage

and I only have a 3 inch dump pipe, not split and standard cat.

Oh, yes, standard turbo and injectors

Ryan - Hows it going mate??

Yep, was Unigroup!

and extremely impressed!!

I'll post up my results when I get a chance, I know Im lazy.. ;)

Ok, so i have my baby back from Tunehouse in Marrickville. My car went from 140.9rwkw, now i have 204.5rwkw. My torque figures went from 1027.2Nm @ 5196rpm to 1518.3Nm at 4473rpm. very happy with the results. i also replaced the oxygen sensor, now i just have to hope the fuel economies are better...

My mods are:

3.5" turboback stainless Xforce exhaust

Apexi Pod Air Intake

GFB Stealth FX BOV

GFB Atomic Boost Controller (running 13psi)

Front Mount Intercooler

Apexi Power FC

Thats about right for 13 psi. If your running standard turbo and you constantly hit WOT/13psi the ceramic wheel wont last long. I know of guy who have blown turbo's at 10 at wakefield

Kennedy,

I stuck with my turbosmart single stage

and I only have a 3 inch dump pipe, not split and standard cat.

Oh, yes, standard turbo and injectors

Standard cat? Man change that cat and welcome yourself to the world of 200RWKW+

Hitman did mine and it was top. AFR's at 11.7. Also, The e-01 held dead straight all the way to my new redline of 7200RPM.

yeah its rare i hit 13psi boost. im not really a super racer but i love to drive hard occasioally. just been for a trip to noosa on the sunshine coast. at first i was very unhappy with the fuel economy but it seems to be getting better. at first with highway driving i was still only getting 350kms per tank...after 2 tanks it seems the power fc is taking more notice of the O2 sensor and i now get 500kms per tank. with highway driving i would still like to see this around 600ks highway and in the city i want at least 400kms to a tank... i guess we'll wait and see.

the next purchase for my car will either be a set of tein coilovers or a new turbo! any suggestions, nothing to expensive.

A lot of good press for UniGroup on thier expertise with a PFC, BUT weren't they producing thier own ECU that was suppossed to be pretty good for SKylines as well some time ago?

I think it was a piggy back but I have an RB20DET Auto so cant use a PFC, or can I?

UniGroup use an ECU called TSI which is made in Australia. TSI are the makers of FPV (Ford Performance Vehicle) ECU's in all the XR6T, Typhoon, GTP .etc. Its on their site.

Personally for a big build i would use CRD. They offer excellent service and proven performance.

For a tune I will always use J.E.M cause i have delt with them many times in the past and Adam has always delivered the best results. Even ask BU5TER his R33 was tuned by J.E.M @ 441rw/kw with 1/4 mile time of 10.5 @ 130 MPH.

Cheers

Edited by QRI05E
A lot of good press for UniGroup on thier expertise with a PFC, BUT weren't they producing thier own ECU that was suppossed to be pretty good for SKylines as well some time ago?

I think it was a piggy back but I have an RB20DET Auto so cant use a PFC, or can I?

I think you might be confusing unichip with unigroup. two different companies.

Hi all,

I read carefully all the comments and I would like to share with you my story. I own an 1993 R33 GTS-t and after 2-3 years I decided to do some mods. When I start the mods I joined SAU and read different articles and different posts. I done pretty much everything you can do to my car: POWER FC, Manifold, injectors, ignition coils, intercooler, fuel pump, etc etc. Bought lots and lots of parts on e-bay and here on traders.

I needed an tuner and from our forum I picked up Yavuz, Unigroup. I went there told him what I want and got a quote. Sounded all pretty good so the work started. As you see was more than a ..."basic tune". We hit lots of walls, and up to 200kw was OK but I did not get the really big numbers. I wanted something between 270-300kw at the wheel. I spend twice the amount I was quoted in labour and tune but the result was still not there. Here is a curve of the best tune I achieved at UNIGROUP. Yavuz found a reason for everything but I was not looking for problems, I was looking for solutions. MY WASTEGATE WAS FAULTY and he refused to spend more time on it. I went back a couple of times, charged me some more but performances did nto change.

Please look at my curve, up to 220kw, all power came quick than more RPM's meant flatter curve. Engine did not GOOOOO. So I told to myself I reached Yavuz's limitations.

I started all over as my car is just a weekend car so, I could afford to do it. Head came off, reconditioned, TOMEI cam shafts, changed intercooler (HKS) replaced my beloved Mick metalcraft, Plazmaman plenum, changed flow in engine, start looking like a GTR. Internals still standard on engine. My bad decision was that I found a mechanic that done it in his backyard and the quality of his work was really poor and even $10.00 if I payed was a total waste of money.

I took this car to John at Unique (UAS). I told him my story and .... after 4 weeks of fixing every little problem I had could go on the dyna. You guys should see what checks are done there before your car goes on dyna and what checks you get from Yavuz, than you can tell the difference.

True my bill was fat, but everything was done before had to be redone. Bolts on my manifold had to be replaced as too weak for new manifold, they start breaking. Lots and lots of other problems have been identified and fixed. Even my engine mount was broken and replaced and properly secured. Fixing my wastegate was not a problem, was just a little something for Richard to fix. I told John I will not pay if there are no performance improvements

When car went on Dyna I got a call from Ben and asked me how much power I want. He said that he can give me easily 300+. I stopped at the modest 270kw at the wheel which I think is more than enough for my little GTS-t. When you take your car to tune be prepared for other problems to be identified which no other mechanic will tell you about so you do not know about.

When car was finished I went and show it to Yavuz and he did not have much to comment on it.

The conclusion is that if your car is not mechanicaly 100% before going on the DYNA, engine will not perform, as simple is that.

I stop my story here and if there are any people interested to find more details please feel free to message me.

NOW MY CAR IS DONE....it's left just to learn to drive it ...properly. I GOT A DRAGON AND I AM NOT AFRAID TO USE IT.

Cheers,

EUG.

post-26490-1170928672.jpg

post-26490-1170929285.jpg

post-26490-1170929331.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...