Jump to content
SAU Community

Recommended Posts

Well I want the bottom end to be bullet proof. Customising pistons through CP's is only an extra $200 from experience, so why wouldn't I go for that and have the peice of mind knowing that I push the motor to its limits.

No engine is "bullet proof"; otherwise the professional race cars, with their unlimited budgets, will make them :(

The only way round this is to make a 1000hp engine and only use 400hp :worship:

Hey guys im finding that when fitting the RB25 oil / water cooler onto the RB30 block that the filter fitting is quite loose over the RB30 filter thread. Any tips for removing the RB30 filter thread and fitting the RB25 o-ring setup for the oil / water cooler.

I'd prefer to keep it than just run it like the VL/R31 skyline setups.

if you do a search in this thread for my name you should find some info on it. i remember going through this dilema and i posted up some info, but i forget now and i ditched the std cooler arrangement :blink:

thanks shanef! been searching before posting a bit actually, but the answers seemed to point back at using the std RB30 setup which it looks like you've done. I know the RB25 setup can be done tho!

http://www.skylinesaustralia.com/forums/t1...2A#entry2788242

bout half way down theres the info i was thinking about! :blink:

hey guys i just ran into a problem as i was filling my car up with water i found a leak out the water pump. the pump i am usin is a n1 pump and it is leaking out the m6 bolt hole. i have tried using some lockseal but i cannot stop it leaking. it is not under presure so i wanted to know how i can stop tis leaking

thanks

i just found out a couple of my valve guides in my head are split. Nothing major it happens sometimes thats why they make bronze sleeves for the valve guides. How crap is this Hi Octane are the only company i can find who sell them for rb25 head and they want $700 for them. ive got no choice but to pay it. Ahh so much money

Anyone using cooling pro intercooler from Just Jap? looking at the GTR style tube n fin, just wanted to know if the internals are any good or just a bit of shit? Anyone got one, or pics of inside one? Cheers!

Contact JHH performance ( they are in Bris ) - Im sure they can replace them for considerably less.

Cheers

i just found out a couple of my valve guides in my head are split. Nothing major it happens sometimes thats why they make bronze sleeves for the valve guides. How crap is this Hi Octane are the only company i can find who sell them for rb25 head and they want $700 for them. ive got no choice but to pay it. Ahh so much money

umn so how do i get a compression ratio of 9 instead of 8.3...... i'm sure it's in there but i stopped reading at page 23... i read that using the N/A head will give me compression of 9? how is that so? the n/a head gasket?????

much appreciated.

i'v got an rb30 with only 105,000k's and intend to drop a 25 straight on. looking for about 500hp. if it blows up il put another bottom on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...