Jump to content
SAU Community

The Epa Thread/Roadworthy Thread

Do-Luck

By Do-Luck,
in Victoria

 Share

Recommended Posts

Bangaz Boy Enthusiast

Bangaz Boy

Posted
Posted
I have to get an EPA noise and emissions test done fairly soon and was wondering If I could get some advice? I have a R33 gtr vspec series 3, current mods are, -5 turbos, power fc, greedy elec boost controller, nismo fuel pump, fuel pressure regulator and injectors, cam gears, exhaust, and pods

I was planning to remove the boost controller, return the injectors and ecu to stock. I believe that the turbos shouldnt be a problem as they are nearly the same as stock. Do I need to return the fuel pump and pressure regulator to stock, I know Im meant to but will they effect emissions if the stock ecu is controlling them and would the inspectors be able to tell between the stock and nismo items. I will quieten the exhaust and leave it that way. Also if I refit the stock ecu will I need to get the car retuned? And is there a difference between an ecu for a gtr and gtr vspec. Any advice is appreciated. Thanks.

Any advice? Just like a bit more of an idea to what stock parts I'll need to start collecting/replacing. Cheers.

  • Replies 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Miguelone
Miguelone

Both fairly straightforward jobs. Really depends how fussy workshop is and how bad the leaks are. If you pressure wash beforehand and it's a minor weep it may not be an issue. ANother option is of cou

wht510
wht510

It is interesting, the dynamic currently. I think with the camera/database and automated method of checking number plates, they already know what kind of driver you are (speeding fines, previous

SKY031
SKY031

Useful links: Legal stuff Traffic Law in Victoria < READ THIS! Approved EPA Testers EPA Guidelines (2006) Is it legal to drive a 33 GTS-t on P's? The answer can be found here .....more inf

Posted Images

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Depends if you've been defected or not.

If you have not, you might get away with it.

If you have, unlikely as it'll be listed on the defect. Any legit RWC place should not honour it without an engineers.

Bruce_Sun Apprentice

Bruce_Sun

Posted
Posted

not defected.

should i do something to make it not so obvious like weld on both side and paint the new metal plate to make the color same.

thx

Depends if you've been defected or not.

If you have not, you might get away with it.

If you have, unlikely as it'll be listed on the defect. Any legit RWC place should not honour it without an engineers.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

You should make it as close to factory as possible mate, closer it is, the better.

Even if it takes more time/money... as once you get defected for it, I'm not sure any engineer in Vic actually signs off on it (if you have airbags)

Bruce_Sun Apprentice

Bruce_Sun

Posted
Posted

no airbag, it is a R32, is it going to make my life easier on this? damn stupid previous owner!!! they cut a hole there and not using it

You should make it as close to factory as possible mate, closer it is, the better.

Even if it takes more time/money... as once you get defected for it, I'm not sure any engineer in Vic actually signs off on it (if you have airbags)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

No airbag means any engineer will easily sign off on a PROPER repair job should you get defected (requiring engineers)

So you shouldn't have any issues if you do a good repair now, and then just go about your normal life.

Being you'll already have fixed it, no-one will know otherwise :)

Russman Grand Master

Russman

Posted
Posted
I got defected for not having a battery wire with tie downs every 60mm and open ended wheel nuts is that BS or can i be done for this?

i got done for other things but just confused about these

^Wow that's harsh.^

I cleared mine EPA today. Even a standard 32 cat back exhaust was 93 db so it failed yesterday, everything else was ok except the guy thought I had diff fuel pump coz it was noisy. Pulled it out and its nissan :(

Had to get a new muffler and it made it 84 db today. It's been 6 months and I will finally have it back on the road.

frozenpod Enthusiast

frozenpod

Posted
Posted
I got defected for not having a battery wire with tie downs every 60mm and open ended wheel nuts is that BS or can i be done for this?

i got done for other things but just confused about these

Not sure about the battery wire but my car from factory has open ended wheel nuts as does just about every car I can think of that has steel rims.

wht510 Experienced

wht510

Posted
Posted

Battery wire tie downs every 600mm (60cm). From memory that's the requirement, but sometimes it's better to have every 40cm.

It's a fair call, but pretty pedantic. If I was the copper, I would've said "Fix this and you can go on your way".

As for the open ended wheel nuts.... Not sure!

I got defected for not having a battery wire with tie downs every 60mm and open ended wheel nuts is that BS or can i be done for this?

i got done for other things but just confused about these

2000gtt Enthusiast

2000gtt

Posted
Posted

I got EPA'd at a defect station at 90.4db...and was told id get a letter warning that it is close to the limit.

I just received a letter saying 94db and to get it checked/fixed.

Im wondering is there any % leeway on these tests like speed cameras have 3km... or is it 90 flat. 90.1 over = defect??

wht510 Experienced

wht510

Posted
Posted

You sure you didn't miss read the reading of 90.4? :blink:

On a serious note, do you have paper work to show 90.4?

Usually they have a tolerance.

I got EPA'd at a defect station at 90.4db...and was told id get a letter warning that it is close to the limit.

I just received a letter saying 94db and to get it checked/fixed.

Im wondering is there any % leeway on these tests like speed cameras have 3km... or is it 90 flat. 90.1 over = defect??

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
You sure you didn't miss read the reading of 90.4? :blink:

On a serious note, do you have paper work to show 90.4?

^That :)

Either way, you are illegal so what it "is" its honestly irrelevant.

You need to be 89dB 4900RPM if memory serves me correct for the RB25... so regardless of 90.4 or 94.0 - you need to fix your exhaust.

There is no tolerance far as i know however. If it's 0.5dB over, you are over and will fail. As the EPA people "tell" you, thier meters are perfectly calibrated.

I know for a fact they are not (having gone to two testers and had a variance of 2dB), but thats just how it goes really.

Peter89 Proficient

Peter89

Posted
Posted (edited)
You should make it as close to factory as possible mate, closer it is, the better.

Even if it takes more time/money... as once you get defected for it, I'm not sure any engineer in Vic actually signs off on it (if you have airbags)

Even after all the defects i have seen cops hand out, i have yet to see even the best cops give a defect for the battery tray hole.

Edited by Peter89

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...