Jump to content
SAU Community

Recommended Posts

^ Totally agree as usual Nik :D

The EPA laws for the most part are in many cases from 1992. Very out of touch with the real world as it stands today. However reforms simply won't come until the Gov't realise there is money in it.

As there most certainly is - do what WA do with the "mod permit" scheme. Each mod(s) require certs/permits as long as they are within reason.

Then charge money for such certs/inspections. Gov't would make a fk'en fortune and we could all drive legally on the streets (again, within reason) :)

Sadly it is the muppets that ruin it for everyone else. People putting blown/injected V8s into Cortinas case point number one. They just were not built to have 800hp motors in them and a LOT of people dodge the conversions up. Of course some do it right, but they are always a minority as it costs money to do a proper conversion mechanically.

Oh and many congrats btw mate :thumbsup:

Woohoo..coped my first defect in the Gtr after having my license for 3 weeks for being too low, it's only a minor. What ball park in price will I be looking at to get it raised, it has Olins coilovers

Woohoo..coped my first defect in the Gtr after having my license for 3 weeks for being too low, it's only a minor. What ball park in price will I be looking at to get it raised, it has Olins coilovers

You're lucky. I got defected for height a week ago and they gave me a major so I needed RWC.

You would be looking at roughly $100 in labour to adjust suspension and then you should also consider a wheel alignment.

Do you know how much lower than legal it was? If it's not much you could get the mechanic to tuck the exhaust up a bit (by far the lowest point on mine when I got defected a few months back), bigger tyres will also help obviously if you're able to borrow them from somewhere.

If they look at the tyre placard then you won't pass with high profile tyres etc.

Sometimes they might, sometimes they might not.

Well hopefully they don't check. And Ric, the exhaust is the lowest point but it's low by quite abit exhaust tuck won't do much I reckon even though it's the lowest point

You can ask the suspension place to put some rubber spacers in. This may get you out of trouble and take care of some of the sag in the springs which occur over time.

Attending to the exhaust and raising it up slightly is a good idea.

Hrmm that sucks drove all the way to my house to borrow a C-spanner for nothing.

Not sure what you can do James because looking at your car your exhaust was very low

Either stock exhaust or stock suspension are my only ideas :(

the make it not hang so low? or if you want to get fancy they'll custom make the piping to go above shit, my one they made the hangers shorter i believe..

probably helped that i know them hence paying $50 but eh its really not that hard like your implying

Hmmm interesting.

Custom making piping is pretty expensive (definitely not $50), but I get where you are going with re making the hangars. That would cost your quoted $50, so you are spot on. Getting the hangers changed would work pretty well, so it's a good suggestion. :thumbsup:

exhaust tuck will 100% solve your problems you can get it basically flush against the under body costs fk all to tuck an exhaust

Flush under the body is going to melt $hit! you need at least 25mm (the requirement). Stainless sheet with air gaps are your friend.

I'm not implying it's hard. Hell, I made the whole stainless system on my 1600 including the dump (took me 4 days just for the dump mind you because I made it from scratch, but did get the flanges laser cut...)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...