Jump to content
SAU Community

Recommended Posts

Guys,

Is this camera kind of faulty?, was going up Stud towards knox and passed the intersection (FerntreeG rd) I knew there was a camera there so I went passed roughly 73~ on my speedo and the camera snapped me, im pretty sure its a 80km/h zone because all the signs say 80, so I was like wtf!

Anybody else have had any issues with this before.

I would sugest that you sit tight and wait for the speeding fine to arrive. Was any one else near you when you went past? Maybe while waiting for the fine to arrive get your speedo checked to be sure, and then don't pay and contest it. Thats what I would do. Best of luck.

I thought it was just a redlight camera?

Was doing right turn off stud onto ftg next to a truck which triggered the camera with his back tyres as light turned yellow.

Didnt know it was a speed camera? Maybe red arrow light turned on as you kept on driving straight and someone turning set it off?

I would sugest that you sit tight and wait for the speeding fine to arrive. Was any one else near you when you went past? Maybe while waiting for the fine to arrive get your speedo checked to be sure, and then don't pay and contest it. Thats what I would do. Best of luck.

if ur right on verification it will be thrown out. happens a fair bit. Also might not have been u.

might have been testing also, when I used ot test i would do it under the speed limit to get lots of images...lol pissed every1 off.

the cameras that got shot a couple of weeks ago on middleborough rd and the freeway - they are or were faulty. It flashed one of these guys car and he was doing around 50 apparently (most people slow down when they come to that camera)

that camera plays up all the time, ive been flashed twice and never got a ticket cause i wasnt doing anything wrong, and i've seen heaps of people get flashed when they arn't speeding or didnt run red light, it only gets you for speeding if the light is amber or red, but the camera even goes off when there is no-one going threw the intersection, i go past it like twice a day thats my experience, theres also a falty one on the corner of wantirna rd and maroondah hwy that goes off randomly too

that camera plays up all the time, ive been flashed twice and never got a ticket cause i wasnt doing anything wrong, and i've seen heaps of people get flashed when they arn't speeding or didnt run red light, it only gets you for speeding if the light is amber or red, but the camera even goes off when there is no-one going threw the intersection, i go past it like twice a day thats my experience, theres also a falty one on the corner of wantirna rd and maroondah hwy that goes off randomly too

its not uncommon cant say why...signed some stuff ages ago which still holds and this is a public forum.

I did a check, these are know problem sites. I doubt u will find any1 getting a ticket from these cameras...I couldn't actually see if these have gone live yet, dont have the access i used to :wacko:. never know...might not have.

Just becuase its installed doesn't mean its working and online.

Yeah I will wait, shouldnt be an issue due to the replies,

It was all green light all the way and it just flashed, I was on the most right lane going forward, and there was a van 2 car lengths behind on my left. But I do remember one car looking going pretty quick on the opposite direct crossingt the intersection as I was. Perhaps it triggered the camera?

pretty sure they have been doing maintenance on those cameras for a while now. i remember a few months ago i was turning right onto ftg rd from stud rd, and i got snapped going thru a green light doing like 25kms. so did every other driver.

ive seen them working on the cameras during the day, that was a few weeks ago tho. so maybe they arent right still...

I wouldn't worry about it, I drive through those lights every day and I see them flash all the time, mind you I haven't been flashed though. As said they are speed and red light, perhaps they were flashing someone else? Has happened to me before in other intersections and I never got any fines. They JUST did some work on them about a month or so ago so I'd say they are pretty on the ball.

I had a similiar experience with the speed camera infront of underworld gym on finders st. i was doing around 58(its 60 there), the light was amber and i got flashed. this was nearly two months ago so i am assuming that i didn't get the fine(i didn't bloody well deserve it anyway! i wasn't doing anything wrong!).

centre road in clayton is another faulty one, been through there, not speeding and got flashed, never got a ticket. mate drives down there all the time and says he gets flashed even at like 40km/h

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...