Jump to content
SAU Community

Recommended Posts

Guys,

Is this camera kind of faulty?, was going up Stud towards knox and passed the intersection (FerntreeG rd) I knew there was a camera there so I went passed roughly 73~ on my speedo and the camera snapped me, im pretty sure its a 80km/h zone because all the signs say 80, so I was like wtf!

Anybody else have had any issues with this before.

I would sugest that you sit tight and wait for the speeding fine to arrive. Was any one else near you when you went past? Maybe while waiting for the fine to arrive get your speedo checked to be sure, and then don't pay and contest it. Thats what I would do. Best of luck.

I thought it was just a redlight camera?

Was doing right turn off stud onto ftg next to a truck which triggered the camera with his back tyres as light turned yellow.

Didnt know it was a speed camera? Maybe red arrow light turned on as you kept on driving straight and someone turning set it off?

I would sugest that you sit tight and wait for the speeding fine to arrive. Was any one else near you when you went past? Maybe while waiting for the fine to arrive get your speedo checked to be sure, and then don't pay and contest it. Thats what I would do. Best of luck.

if ur right on verification it will be thrown out. happens a fair bit. Also might not have been u.

might have been testing also, when I used ot test i would do it under the speed limit to get lots of images...lol pissed every1 off.

the cameras that got shot a couple of weeks ago on middleborough rd and the freeway - they are or were faulty. It flashed one of these guys car and he was doing around 50 apparently (most people slow down when they come to that camera)

that camera plays up all the time, ive been flashed twice and never got a ticket cause i wasnt doing anything wrong, and i've seen heaps of people get flashed when they arn't speeding or didnt run red light, it only gets you for speeding if the light is amber or red, but the camera even goes off when there is no-one going threw the intersection, i go past it like twice a day thats my experience, theres also a falty one on the corner of wantirna rd and maroondah hwy that goes off randomly too

that camera plays up all the time, ive been flashed twice and never got a ticket cause i wasnt doing anything wrong, and i've seen heaps of people get flashed when they arn't speeding or didnt run red light, it only gets you for speeding if the light is amber or red, but the camera even goes off when there is no-one going threw the intersection, i go past it like twice a day thats my experience, theres also a falty one on the corner of wantirna rd and maroondah hwy that goes off randomly too

its not uncommon cant say why...signed some stuff ages ago which still holds and this is a public forum.

I did a check, these are know problem sites. I doubt u will find any1 getting a ticket from these cameras...I couldn't actually see if these have gone live yet, dont have the access i used to :wacko:. never know...might not have.

Just becuase its installed doesn't mean its working and online.

Yeah I will wait, shouldnt be an issue due to the replies,

It was all green light all the way and it just flashed, I was on the most right lane going forward, and there was a van 2 car lengths behind on my left. But I do remember one car looking going pretty quick on the opposite direct crossingt the intersection as I was. Perhaps it triggered the camera?

pretty sure they have been doing maintenance on those cameras for a while now. i remember a few months ago i was turning right onto ftg rd from stud rd, and i got snapped going thru a green light doing like 25kms. so did every other driver.

ive seen them working on the cameras during the day, that was a few weeks ago tho. so maybe they arent right still...

I wouldn't worry about it, I drive through those lights every day and I see them flash all the time, mind you I haven't been flashed though. As said they are speed and red light, perhaps they were flashing someone else? Has happened to me before in other intersections and I never got any fines. They JUST did some work on them about a month or so ago so I'd say they are pretty on the ball.

I had a similiar experience with the speed camera infront of underworld gym on finders st. i was doing around 58(its 60 there), the light was amber and i got flashed. this was nearly two months ago so i am assuming that i didn't get the fine(i didn't bloody well deserve it anyway! i wasn't doing anything wrong!).

centre road in clayton is another faulty one, been through there, not speeding and got flashed, never got a ticket. mate drives down there all the time and says he gets flashed even at like 40km/h

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...