Jump to content
SAU Community

Recommended Posts

  • 5 months later...
^^^ yeah but it is a untidy solution and TRAC is a pain in the ass at the best of times

Need it for when my sister & mum borrow my car from time to time...

I'd never let them use it without TCS...

well i'll let you know, i was thinking of taking my throttle body into work and chopping it in half. then remote mounting the traction control half of the body about a foot down the intake pipe like just after the bend. it should work pretty easy since its such a simple design, because all it does is create a restriction in the intake.

it should make piping alot easier since it would be like installing a r33 throttle body but retaining traction control. Im also going to make adaptor plate for the aac valve so if it works i'll post a cad drawing or a stencil. you see I'm a cheap ass and i work for an engineering company that will do all my welding and fabby work for free..................... go me lol

also are the 3 flanges on the bottom for the water, are they the same on the r34???

regards

chris

  • 5 months later...
ps traction control is actualy realy good if you grind the butterfly down a bit, then it wont let you spin the wheels but also wont let you stall it when you do a 5k clutch dump. i did a thread on how to make it work if you wanna search for it.

Link???

  • 1 year later...

Updated for those asking where my pics were of a R34 neo with greddy plenum, Can a mod fix the OP thread title? i could not find it for the guys as it said Greedy not GREDDY ;)

Can anynone 100% confirm that the Greedy (it's Greddy not Greedy - BB) plenum will fit the R34 neo? Besides upgrading to a larger TB...what else is needed?

cheers!!

Its Gr-eddy, as in the mountain range Great Eddy where a certain high profile japanese drift king or Dori kin used to do his thing

  • 1 year later...

Hey anybody got a pic of what the RB25det neo throttle body looks like? I'm not sure if the neo in a series 2 stagea has one (it's awd).

Stageas do not have traction control, so they do not have the traction control butterfly and throttle motor. Just a nice R33 stylez TB (I don't know that it is the same as an R33 one excatly, but it's the same in overall concept).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...