Jump to content
SAU Community

Recommended Posts

LOOK TOWARDS THE BOTTOM OF THIS FIRST PAGE FOR THE CURRENT RIPP OF ARTIST SELLING (GuestyR33) STUFF ON SAU, DONT BUY FROM HIM AND IF U DO URE A BLOODY IDIOT!!! :(

howdy all, i learnt a valuable lesson yesterday/today, if it seems to good to be true IT IS !!! Yeah i know we have all heard this before but i just want to let people out there know the bad and the good of this story. Yesterday i did something very stupid, a newcomer to the forums had a pfc for sale and needed cash quikly for this item, i jumped on it and had a conversation with the guy and all seemed fine, i outlined my concerns about him being a noobie and told him i wanted some reassurance he was not dodgy, he provided his address details and a land line to contact him on, (he was cool calm and collected) he mentioned another forum user had been hassling him for it but did not like his pushy attitide and therfore was not going to sell to him, i accepted this (stupid me) and he went on to agree that if i paid a deposit the rest could be done via cod, i was still a bit hesitant but even though am relitvly a noobie my self i have bought quite a bit of stuff since i have been using this forum and have successfull buys/trades with 6 (soon to be 9 once my gear arrives) people. I guess with my good experiences compiled with wanting the pfc really badly i made a bad decision and transfered $200 via internet transfer. I flicked back to my pm's and noticed the title in large letters "DO NOT PAY THIS GUY A CENT' it was too late, i then flicked back to where the post was and the admin BLITZ had also arranged to buy this item. I replied to this post calmy and said i would sort it out (i had the seller on the phone at that piont and assured me all was good) i put the phone down and re read the pm, needless to say it was bad, then i knew i had been ripped, 5 mins later tried ringing--- and up till right now no answer. I raced down the bank this morning and put a stop payment on the transfer, it cost me $55 but thats better than a $200 lesson on how not to be a dickhead!! the guys name and details are;

James Pratlo

1132 toorak rd, Toorak 3142

Westpac bank bsb 733120 and account 599028

his mobile is 0437073329

just in case someone else comeas accross him

I would like to pay a big thanx to blitz for trying to warn me, but there is another side to this story?!?!?! I would also like to pay a very big and special thanks to two very decent and honest people, firstly to monster930 (u know who u are and for what for) and to cerci, youre a champ too!!! these two were very honest when dealing with me and put up with my constant pm's asking where is it how long etc!! (lol) there is however another person i am holding back saying their name at this point, you know who u are and if you dont reemburse me now ( you have had plenty of time and its not as if you dont have the $$$, u sold ure car) i WILL name you and the shitty thing you did/ and doing now, so thats my whinge/moan but most of all my lesson and thanx to all those good ones out there, cheers Damo

Edited by madaz R33
Link to comment
https://www.sau.com.au/forums/topic/160992-ripped-down-but-not-out/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Im in Melbourne... want me to go pay him a visit? :)>_<

haha, that would be good but who knows if that is even his address, thanks for the offer, guess i will have to put this down as a lesson! a $55 lesoon at the end not $200 (stopped the payment), cheers Damo

Damo, glad to hear you had some success at your bank.

That shonky piece of shit gave me an address of 7 Blooms Road Warandyte WA 4003 which doesn't exist.

I called him and asked him why he gave me a false address and he denied it, and couldn't tell me why he hesitated so long before telling me where he lived.

Damo, glad to hear you had some success at your bank.

That shonky piece of shit gave me an address of 7 Blooms Road Warandyte WA 4003 which doesn't exist.

I called him and asked him why he gave me a false address and he denied it, and couldn't tell me why he hesitated so long before telling me where he lived.

shifty little prick eh? after i had made the transfer and flicked back to the thread, thats when i realised it had gone horrible wrong (lol) The post from me saying i would sort it out was me trying to save face and hoping deningly it wasnt true!! (lol) well i think i should change the name of thread to $55 lesson, (only $55 compared to $200 later!!!!! well any way thanx dude, valuble lesson 4 me and others here too!!!, cheers Damo p.s this is a bit cheeky but i may be able to get away with it considering..... i have a type M front bar for R33, that i have had tucked away, dont need it have my orig and my new 400r bar, time to recoup some lost $$$$

Edited by madaz R33
Damo, glad to hear you had some success at your bank.

That shonky piece of shit gave me an address of 7 Blooms Road Warandyte WA 4003 which doesn't exist.

I called him and asked him why he gave me a false address and he denied it, and couldn't tell me why he hesitated so long before telling me where he lived.

Wow, I'll be sure to look out for the new suburb WARANDYTE in western australia, im hearing good things.

(ps the postcode of 4002 is a dead giveaway eh?)

Dodgy mofo's

Here is a lesson for everyone, if it sounds to good to be true, it probably is ( where can you buy a power F/c for a 33 GTST for $650? ) I saw one in Yahoo Japan go for 110,000, thats over $1200!

Hey Jerry

I honestly believe it is possible to get a bargain sometimes, but you have to be very very careful. Often the old age addage of 'you get what you pay for' applies.

Bargains can be scored occassionally, but more often then not, your chance of being scammed increases exponentially, in terms of not receiving any item at all, receiving something damaged, or receiving somethign that doesnt' work.

  • 1 month later...

Well its happened again (well sort of) this time i bought an item from a member of sau with a good trader rating 3 or 4 i think, paid for the item got it shipped hear only to discover it was rooted, the guy communicated with me at first, tried to blame it on the freight company, but got others opinions and realised it had been in an accident, now he says he wants to sort this out, cause he doesnt want it to affect his trader rating, etc, but after i tiold him it had been insected and was shagged, he doesnt answer pm etc, i have tried to contact one of the moderators with no result, now he is currently selling gear on sau, and if i go on his thread and name him up theres no way i will see my money, but then theres the thing he may rip others,this is really pissing me off i just should name him! but no $$$$ for me if i do and what are the possible ramifications for me if he says prove it etc? well i can, pics of it after it arrived, pms etc. the moderator i have contacted hasnt responded so im left in the air, but the longer i leave it the grater the chances of getting away with itwhat should i do?????......

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...