Jump to content
SAU Community

Recommended Posts

thought it would be good to hear what dodgy stuff ppl have done to there cars...

i have on previous cars cut springs... used speaker wire to wire up stuff (driving lights/guages)......used gaffa tape on rust and painted over it (old Bomb)

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

I ran into a street sign in my Hyundai and held the left head light, front bumper and left front quarter panel on with cable ties, then proceeded to sell the car in this condition for $7,000. Actually felt bad about this for a while :X

Dodgy things I've done to my car?? what about the dodgy things it doing to me?? - Lately I turn up the volume on my stereo - and the airconditioning fan comes on WTF!

But in the past .....

I've heald part of my wing together with racing tape. I've cabled tied my intercooler on. Actually most mods were held on my previous car with cable ties or racing tape.

lol where do i start!!

got race tape holding my front bar together cause its scraps on every bump n has cracked it, used electicl tape around my radiator pipe cause theres a hole, so many other things but cant tell

Dodgy things I've done to my car?? what about the dodgy things it doing to me?? - Lately I turn up the volume on my stereo - and the airconditioning fan comes on WTF!

But in the past .....

I've heald part of my wing together with racing tape. I've cabled tied my intercooler on. Actually most mods were held on my previous car with cable ties or racing tape.

haha yeh sometimes my windscreen wipers like to go on themselves and dont like to be turned off. have looked like a complete tool a times driving around in 30deg+ days with my wipers going nuts..

The fuel pump broke on one of the work trucks at my dads farm , so rather than walk home we found a lamb bottle these types of bottles have really long hoses to put into the lambs guts when they wont drink , this hose went into the carbretter drained abit of fuel than used gravity as the fuel pump by holding the bottle out the drivers window

I knew this fellow a few years ago to fix rust on his 4x4 he just cut it out then riveted a new piece of metal over it, a cop goes to him one night

(cop) "u can`t do that"

(bogan) "why not they do it on aeroplanes"

- Used a length of rope to remount cooler... for 5 days

- Duct taped the drivers side of the front bar after a tussle with a gutter

- Used double sided tape to mount number plates

- Cable tied pod together

- Drove around with four completely different tyres for a month

... and probably more

Painted a mates old Mazda 323 banana yellow, with housepaint, it was a good idea after drinking a lot one summer. Didn't bother masking much of it up and did the edges of anything that needed to be clear with a paintbrush... it looked dodgy then, got even worse when it got new shoes which where some huge 16" knobby rally tyres and alloy rims (they got painted yellow too) and about a 2" lift with patented MK guard flaring with a 10lb sledge as a dolly and a big f-ck off rubber mallet.

Then it was proper dodgy.

was on the way back from qld and when i got to coffs one of the rocker clips that hold the rocker into place the bolt stripped off and the only thing i could do was wrap electrical tape around the bolt and screw it back it.

It lasted months lol

cable ties are the way of life in the car scene

haha!

cable tie pod to keep it stable,

cable tie the front side & rear kit on cause i didnt have any screws,nuts or bolts..

tied the bonnet down with a piece of string coz latch was fooked lol

a friend of mine had an old hilux (paddock basher) the passenger door swung open while driving and it snapped off of the body wear the hinges are attached, due to rust!..... we welded the thing on and it lasted another couple of years!

i have seen front bars that have cracked and had heaps of cable ties put in it to hold it together.

a few cars back i had a heap of hcips on the front bar and i was going to sell it so i got a can of touchup paint and just sprayed over the top of it without rubbing it back... or cleaning the bugs off. looked great afterwards.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
×
×
  • Create New...