Jump to content
SAU Community

Recommended Posts

What do u reckon of a Full Lock?? Too much on the street? n chop up my tyres easily? I'm thinking of doing this n ordering some shimms n rang nissan n said it will take 2 weeks ex Japan.. or i could get a full lock one for 300bux?? What u reckon?

Search for opionons on locked diff's, i have had one in my old rx7, very predictable and easy to manage, if its only a matter of waiting 2 weeks then i would wait, if its just a track car or a weekender then there is no reason not to lock it, if its a daily then i'd wait 2 weeks.

If you do search for other threads on locked diffs take note of the people who say that locked diffs are deadly blah blah blah, 95% have never had one, then note what people who have had them think of them!

Also how bad is your diff, i was all prepared to do this and my clutch in the one weekend, everything was set then found out i had to wait for shims, put some penrite limslip 85w-140 and now its all good.

Mine would single spin 10-20% of the time so it isnt totally shagged but enough to be annoying.

What do u reckon of a Full Lock?? Too much on the street? n chop up my tyres easily? I'm thinking of doing this n ordering some shimms n rang nissan n said it will take 2 weeks ex Japan.. or i could get a full lock one for 300bux?? What u reckon?

I wouldn't do it in a daily, mainly because of the destruction to tyres and bushes, also cops will hear/see it if they pull you into an rbt.

Just save for a 1.5 way, a second hand centre is only 500 usually, get the clutches machined and it all professionally installed would set you back maybe $1k max. Do it once do it properly.

i was planning to shim my diff also but all these ppl saying how it chirps and locks up on low speed/tight corners just puts me off.

do 1.5/2ways do this also?

if so then i will just stick with standard or whack in a GTR LSD.

i was planning to shim my diff also but all these ppl saying how it chirps and locks up on low speed/tight corners just puts me off.

do 1.5/2ways do this also?

if so then i will just stick with standard or whack in a GTR LSD.

1.5 ways and proper 2 ways don't. Kaaz and improperly shimmed LSDs will chirp and carry on.

I have no idea why people buy kaaz 2 ways that chirp etc, what is the point, might as well just get a locker if they are going to carry on and cause understeer.

Any1 else know where i can shimms besides Nissan n waiting 2 weeks? in Perth of course :D

The LSD feels a little bit loose.. in can feel it in full turn in low speeds like 1st gear.

Edited by Black_CSR

Any1 else know where i can shimms besides Nissan n waiting 2 weeks? in Perth of course :D

The LSD feels a little bit loose.. in can feel it in full turn in low speeds like 1st gear.

get them express from adelaide in 1 day?

im pretty sure unley nissan has had them that day whenever I've been there.

Express Adelaide?? u mean if they have to order it in the east like Adelaide?

No I mean that Unley Nissan here in Adelaide has always had diff shims in stock when me or a friend has purchased them, hence call them up, pay over the phone and get them to send them to you via an express post satchel so they arrive the next day.

Faster than 2 weeks from Japan and probably cheaper.

Black_CSR, which Nissan did you try?

I always go through Steve at Northside Nissan and I'm pretty sure Grifforelli got some from there last week.

I rang Total Nissan Cannington... Might call Northside then n try my luck.

Does any one have any negative on going to a ~4.6 shim, as in putting 2x 1.49 and leaving the standard .8's in there.?

Depends how worn the viscous unit is (if the shims have scored into it), a 1.49 each side was enough to lock my diff totally for a couple of weeks.

Depends how worn the viscous unit is (if the shims have scored into it), a 1.49 each side was enough to lock my diff totally for a couple of weeks.

Bubba, has it ever single pegged since shimmed? Also does it still chirp around tight corners?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...