Jump to content
SAU Community

Recommended Posts

i loved this thread very interesting love the determination and i learnt so much

anyway good luck godspeed !!

and i will be eagerly awaiting the final espisodes of project 24

sorry bit off topic but

do u by any chance have a 20det bottom end laying around :D ?? if so how much???

Great topic. I want to eventually go this way as well. I've got 2 questions for anyone who can help. Sorry if they seem a bit dumb.

Firstly, if you have the Apexi FC + controller for an RB20, is it going to be entirely useless with the new stroked engine?

Secondly, why do folks guess that Lewis Engines goes with a 2.25 stroker? I mean, for the same effort and similar money in parts (???) I can't work out why they wouldn't go with a 2.4. Any ideas appreciated. Thanks.

http://www.lewisengines.com.au/prod158.htm

Edited by Willie

Hi,

To answer your questions:

1) It will work just fine, you will need a retune because of the increase in size and Cam's etc

2) Not really sure why they wouldn't go all the way to 2438cc's If they are changing the Rods, slugs and crank it's something you would have to ask them.

Cheers

Cameron

Secondly, why do folks guess that Lewis Engines goes with a 2.25 stroker? I mean, for the same effort and similar money in parts (???) I can't work out why they wouldn't go with a 2.4. Any ideas appreciated. Thanks.

http://www.lewisengines.com.au/prod158.htm

id say no got to 2.4 because they offer a kick ass rb25 rebuild package that would cost basically the same

rb22 has different characteristics to it than rb24/25 - longer stroke than the rb20 but shorter than 24/25 and higher revving etc etc etc

call Darren he wont be shy of telling you all about it .. he just did my rb22 with few adjustments here and there from his usual package and im more than pleased with the result for my needs

btw - been following this awesome job on rb24 and commitment to doing something a little different ..well done

Firstly, if you have the Apexi FC + controller for an RB20, is it going to be entirely useless with the new stroked engine?

The reason it says it is for an rb20 is because it is for the rb20 loom and sensors, it doesn't matter if you have a 5L 6cyl engine in there, it will be be able to tune it providing all the sensors and connections are the same.

The reason it says it is for an rb20 is because it is for the rb20 loom and sensors, it doesn't matter if you have a 5L 6cyl engine in there, it will be be able to tune it providing all the sensors and connections are the same.

Thanks for the answers re. this and the RB2.2. Appreciate it guys.

Thought I might post a couple of happy snaps of the car that I just recovered of a damaged hard disk.

post-23119-1267260110_thumb.jpg post-23119-1267260128_thumb.jpg

Just Fired her up again, The HKS Tripple plate clutch at 600rpm sounds like a bucket of bolts floating around the bottom end.... :P

Edited by murrayis
how about i give you a half finished half circuit, half drag r33 gtst lol

Nooooooooooooo Deal :)

Anyway seeing that the last video audio was pretty crappy, I took this one not long ago for everyone. Still sounds like a rb20 I think :rofl:

Anyone know why so much oil smoke would be coming out the breather and form the back of the engine :S has me a little concerned.

Edited by murrayis
is it bedded in yet??

Nah I wouldn't of thought so it's only done 30 mins on the dyno getting the base run in tune done on the old ECU

I was hoping it was just blow by until the rings bed in.

Edited by murrayis
hi there totally awseome build im doing the same but rb22 im having problems with the pistons touching the oil squirters did you have such problems??

Hi,

No we didn't have these issues, I guess they will only be fouling the squirers by a couple of mm, you could get some spacers machined up to space the squirters out a little more? Another way around is to notch the pistons to give sufficiant clearance to them.

What pistons are you using?

Cheers

Cameron

Hi,

No we didn't have these issues, I guess they will only be fouling the squirers by a couple of mm, you could get some spacers machined up to space the squirters out a little more? Another way around is to notch the pistons to give sufficiant clearance to them.

What pistons are you using?

Cheers

Cameron

Im using the 4AGZE pistons :(

Everything was going ok until this i dont think i have enough room to space them down as im using the rb25 crank and rods not the 26 crank and rods

Im a bit gutted

any ideas ???

Hey,

Simple, Get a notch machined in the pistons to give clearance to the squirters. You will find they don't clear because the piston pin height is different and the 4agze pistons sit 2mm shy of the deck.

How did you get around this?

Cheers

Cameron

Hey,

Simple, Get a notch machined in the pistons to give clearance to the squirters. You will find they don't clear because the piston pin height is different and the 4agze pistons sit 2mm shy of the deck.

How did you get around this?

Cheers

Cameron

Im thinking of getting this notch machined but seems ill have to take out about a 15mm notch height wise :down:

Do you not think this will weakin the piston though.

Im thinkin ill have to go down this route iv come so far want to complete it then i can show the full build

I hear alot about the 4agze piston fitments but know where can i find someone that has done the build just alot of hearsay

:blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...