Jump to content
SAU Community

Recommended Posts

So was it on, as i missed it :(

I spoke to the reporter yesterday, he said it got pushed back because there was a number of 'breaking news' stories this week.

He recons it will be on either tonight (I hope not 'coz no one watches on a Friday) or Monday night.

Mal called, and told me to switch channel, so i did. All i saw was vids of hoons, Kev very briefly say something about driver education and the echo doing two 360 turns. That's it! :P I saw more hoon vids than anything else :)

And Mal said Bec was seen very briefly, and not even driving :P

Yay was finally on....Go Bec :).....was only on briefly including a little shot behind the wheel having a good laugh :thumbsup:

What I was disappointed with was that they turned it into a hoon story WTF??? The arguement was that they shouldn't be teaching people those kind of skills as they will just do it on the roads. I'll put that in the same basket with the poli's arguement that we shouldn't put young drivers thru a defensive driving course to save their lives as they will be overconfident on the road :whistling:

I just ripped the feathers out of my pillow. Just need some tar and a mob of angry ACA viewers. Truly sad the spin put on things. Actually disgusting really. Make you wonder what else are they trying to shape our views on

To be honest it doesn't really worry me too much, people aren't stupid, it's pretty obvious we dont run a Hoon driving course.

I guess it was a little dumb of me to believe them when they said they weren't going to put a hoon spin on it.

To be honest it doesn't really worry me too much, people aren't stupid, it's pretty obvious we dont run a Hoon driving course.

I guess it was a little dumb of me to believe them when they said they weren't going to put a hoon spin on it.

Its very disappointing to see the Media doing a back flip on your kev.. Hope you still get some business out of it at the end of the day even if its not some of the more preferred business you would like... P.S if you please to go to noble maccas on 2 wheels can you let me know i want to come watch :thumbsup:

To be honest it doesn't really worry me too much, people aren't stupid, it's pretty obvious we dont run a Hoon driving course.

I guess it was a little dumb of me to believe them when they said they weren't going to put a hoon spin on it.

People are stupid, they watch ACA and TT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...