Jump to content
SAU Community

Recommended Posts

i dont get the flames part

my brother bought an r32gtst which got through compliance with no cat anywhere. it never shot flames, backfired, made black soot or smelt bad. but there was absolutely no cat on it

a year later he got a hi flow metal cat. only difference now is that the note is apparently different, -but i cant tell.

Oh and he wont get a $10k fine

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Just make sure if you do knock it out you put a straight pipe through the cat or it will more than likely lose you power.

I agree with some of the comments and disagree with others, if your making less that 220rwkw's i do believe its pointless and not worth the gains. I have now put a 3" pipe through my cat and to me the Pro's were: a good 10-15kw power gain and boost definitely comes on earlier with less back pressure. The cons are my rear bumper is always black and it definitely made my car louder and dronier!

Interested if any one is running a cat with launch control antilag thingo

such as the Bee*R, powerfc pro etc did it blow your cat to pieces?

Have been thinking I would have to go for a decat pipe if I end up running antilag launchcontrol

so curious if anyone else has had any issue's

Thx for the input, you guys love your flames, i didnt know it would blow flames, was just asking in regards to having a bit more power and also coz i dont have and wont have a spare dollar any time soon to buy a cat. Might just leave the one i got as i have a kit fitted and car is getting resprayed next week, dont wanna burn that fresh paint.

This is what I noticed:

1. sound didn't get much louder at all.

2. power increase was a fair bit. For the person who said smashing it will make less power, sure if you get 3" pipe welded through it, it'll have more power, but it's not exactly going to rob power if you smash it out without putting pipe inside. Think of it as a small muffler (cat body) compared to having a plug in your exhaust (cat). It still made quite a difference smashing it.

3. bumper didn't really get any dirtier. Our cars run a bit rich anyways, so the bumper naturally gets a little soot on it. Didn't make anymore soot.

4. smells? not really hey. Exhaust fumes normally stink and of course you shoudlnt' breath them in normally - carbon monoxide. I didn't notice it being more smellier after.

4. flames - come on guys, it's not like it's flaming 24/7 or something. it's not like it flames on idle or something. It flames if you're absoloutely killing it and evyerthing's really hot. If you've been hitting it, and if you let go at wot, then it might flame. The flame is really quick, and it never really burnt anything of mine (doesn't really get near it, just striaght out.

The power difference between no cat and hiflow cat is not that much if you have a decent hiflow cat. and definitely not worth the risk of a $10,000 fine!

I had a 3" cat-bypass pipe made to replace my 3" Metal cat (thats the brand) for testing purpose. It only gained 6rwkw on the dyno and my car was running 250rwkw+ at the time. It would have made even less of a difference for a lesser power car.

Knocking Out Cat Guts? Not worth the effort and risk.

bunch of hippies i reckon haha

From my experience i've noticed that:

1. it will make a difference to performance, and if you have a stock 10-15 year old cat in your car that is most likely cloged and melted together then you will gain a nice amount of power.

2. Your car will be slightly louder but nothing crazy, no where near the extent of taking out one muffler.

3. I have seen plenty of cars with no cats what so ever pass the emitions test with flying colours.

For example, my celica had a 3inch hiflow cat, i decided to put in a 3inch decat (looks kinda like a cat but its hollow), notice a very small difference but this would be because i already had a nice flowing cat. Anyway i had to get my plates changed from QLD to WA and i forgot that i had left the decat on it. Passed visual inspections cause the guy was a retard and it also passed the emissions test. This was a car that i hadnt tuned yet and was running the very rich base map tune, and the exhaust consisted of straight pipe and onehks cannon. No dramas...

bunch of hippies i reckon haha

From my experience i've noticed that:

1. it will make a difference to performance, and if you have a stock 10-15 year old cat in your car that is most likely cloged and melted together then you will gain a nice amount of power.

2. Your car will be slightly louder but nothing crazy, no where near the extent of taking out one muffler.

3. I have seen plenty of cars with no cats what so ever pass the emitions test with flying colours.

For example, my celica had a 3inch hiflow cat, i decided to put in a 3inch decat (looks kinda like a cat but its hollow), notice a very small difference but this would be because i already had a nice flowing cat. Anyway i had to get my plates changed from QLD to WA and i forgot that i had left the decat on it. Passed visual inspections cause the guy was a retard and it also passed the emissions test. This was a car that i hadnt tuned yet and was running the very rich base map tune, and the exhaust consisted of straight pipe and onehks cannon. No dramas...

The problem is not every "visual inspector" or policemen that pulls you over would be retard. If the police gets a metal wire into your rear end and find it straight though, you're busted. They wouldn't care if your car passes emissions or not.

Anyone who's been around cars a few years can tell straight away if it has a working cat or not - the smell is completely different . As for flames from the exhaust ? shouldn't be doing that with or without a converter - its not there to be a flame or spark trap . If the EFI system is injecting fuel when it shouldn't something is very wrong or the load/airflow sensing device is sending the computer the wrong messages .

Just about everyones got a family and they have to breathe as well .

As for unleaded avaition fuel (Av gas) , this is far from the best fuel to run from purely a performance point of view .

Any responsable person will run a working converter and high flowing ones are a buy bolt affair nowdays .

Every mug that gets busted takes us closer to the day when the RTA will have road side sniffers and the simple cheap light type road side gas analyser . Think about it , you may pass the RBT test/noise test/computer rego check/visual height check etc but if they have a cheap means of sniffing the exhaust (particularly if there's signs of soot and blistered paint) your going to be general revenue's best friend .

The authorities LOVE making examples of people driving performance and import cars . For all of our sakes can you please do the right thing .

Cheers A .

I have a hollow cat and the cops are so retarded they tried to tell me i "had no cat". Had to point it out to them.

If you wana do it, farkin do it, you run the risk, we aint yo mamma :(

What do you mean hollow cat is that a brand? Even if you have a cat with the guts punched out they will still be able to pick it up by putting a probe in the end of the exhaust then they will probe you with a nice fine. Anyway i had a hollow cat as old mate puts it, and when i changed it to a a proper highflow cat i notcied no difference whats so ever with performance, the exhaust note was just a tad bit quiter. And yes its definatley not worth the trouble and the risks you run.

"For example, my celica had a 3inch hiflow cat, i decided to put in a 3inch decat (looks kinda like a cat but its hollow), notice a very small difference but this would be because i already had a nice flowing cat. Anyway i had to get my plates changed from QLD to WA and i forgot that i had left the decat on it. Passed visual inspections cause the guy was a retard and it also passed the emissions test. This was a car that i hadnt tuned yet and was running the very rich base map tune, and the exhaust consisted of straight pipe and onehks cannon. No dramas..."

I would be very curious to see what emissions test that passed? There isnt one with a blue slip

I bashed out my cat, slightly deeper note, no noticeable increase in power or response, probably not worth the effort IMO. I don't get any flames, a bit of a smell but thats it. Its worth checking your cat, if it looks screwed, change it or bash it, if it looks okay, then leave it be.

You can always pick a car that has no cat when traveling behind...

Cops aren't totally stupid either, if something smells odd they'll make no hesitation in pulling you over and either defecting you on the spot or sending you in for a machinery.

Best bet get a good quality metallic cat converter :P

Keep your old cat for when you need to put it back on for EPA purposes. Go and purchase an old commodore cat, doesn't matter the condition it's in. Go to a workshop and have them weld flanges on to a three inch pipe. Now with the commodore cat you have purchased get them to unpick the outer shell off and weld this over the pipe. Now obviously the side with the small holes in it goes upwards. Now you have a high flow cat. Enjoy

You guys seem to be missing the point that these 'hi flow cats' are bloody expensive.

mickr33 has the right idea, and i doubt the cops would carry a 3m long piece of wire around just to stick up your pipe which has 2 90 degree bends in a row :wub:

Just pop it out. Everyone knows flames are cool and the earth is dying anyway.

If youre worried about emissions then dont drive a car.

  • 1 month later...

i've been considering this myself. :

pros

possible performance/responsiveness gain

possible flames (you know you want em!)

slightly tougher sound

FREE!! - sure we would all like to swap to a nice hi-flow metallic cat, but who wants to pay for one?

cons

possibly more damaging to the environment - although i doubt the people that site this as a reason not to 'punch your cat' are out lobbying to all motorsport leagues to put cats on their race cars, or trading in their high perfomance cars for electrics...

possibility of a fine - heaps of the mods people carry out on this forum are potentially fine-able, though this is definitely not a light issue. in the end its up to you, i'm sure we all occasionally breach the laws (speeding etc) by accident :thumbsup: which is also a risk we take. plus now i think they can impound your car (in many parts of QLD anyway) which could make 'swapping to a proper cat for an emissions test' difficult??

like someone said, we aint yo' mumma. and we aint paying your fines so the choice, as always, is yours!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
    • Welcome Adam. Car looks great!
    • "With a 1.5-WAY, the LSD is effective only during acceleration."
    • Well it wasn't as easy as I thought.... and it also wasn't in my original manual which I did end up finding. They discuss the process in the Nismo catalogue though and it requires slight machining. Page 145.  NISMO PARTS CATALOGUE 2020
    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
×
×
  • Create New...