Jump to content
SAU Community

Recommended Posts

so nick...i heard u got it retuned, or is this just a rumour?

o did you now lol yep it did

soooooooooooooooo after being totally disgusted with my past tune in more ways than one i took the car to a professional JEM (Adam) an not a self proclaimed prodigy as i did be for.

after taking 20 deg of timing out of the tune and fixing all the holes and flat spots and much much more errors the car is perfect.

things jem did for me

Tune the car in the way it was supposed to be done from the beginning.

engine protection set up with oil press,inlet temp and wide band sensor

wire meth to map sensor

wire press sensor

install wide band

replace temp sensor

new plugs

road tune after dyno with me driving

and a total respect from beginning to end of the customer and all done in 2 days not 16 days

all this for a $400 more than my worst experience ever who did F/A

turbo spools much earlier boost is much smoother it makes 200 odd nm of torque more a/f ratio is 11.8 be for it was 12.8

end result it a well tuned 356kwatw with 913 nm or 672.7 ftlb @ 8200 rpm

take me for a spin take me for a spin lol :action-smiley-069::action-smiley-069::action-smiley-069::action-smiley-069:

me me me me

sounds good to me will find some time with marko and who ever won't one day

post-26570-0-96646400-1380339811_thumb.jpg

Edited by WARLORD
  • Replies 539
  • Created
  • Last Reply

Top Posters In This Topic

Wow, sucks to hear the old tune was THAT bad... Flags raised for me from things you mentioned though, so really glad you took it to JEM who yet again convince me that they are a class act, and glad it happened before damage wad done! Congratulations on a good result :-)

thanks, i was told that im lucky the engine is still alive,or even running with the settings i compared i am totally shocked,

i should really be given back my money for all the bullshit i went through

Edited by WARLORD

So did Adam do a back to back run with the old tune? Would have been good to see an overlay of both

IMO if JEM is capable of tuning the ATCC GIO GTR, they know what they are doing...this is when JEM gained my respect

Great to see u are finally happy after a very long and rough run nick

  • 2 years later...

you twisted my arm things that have been changed or being changed.

valve springs,rear arms ,fuel setup: rail ,injectors, fuel pump,e85 solenoid,diff gears to 3.9, gtx3582r ,sinco manifold ,wastgate ,seats,and more shit i can't remember

should be ready soon i hope a fair bit of fabricating to do but that's ok .....i hope.

last year s/m 1000

https://www.youtube.com/watch?v=bvEaDXwRy8g

 

20141209_205143.jpg

20141210_084213.jpg

20150925_105340.jpg

20150926_153827.jpg

20151031_194143.jpg

20160302_085038.jpg

20160609_151845.jpg

20160728_113600_001.jpg

20160728_113621.jpg

20160728_114415.jpg

20160731_091241.jpg

20160731_091248.jpg

20151128_120823.jpg

20131202_143049.jpg

20160329_084210.jpg

20141209_205143.jpg

20141210_084213.jpg

20150925_105340.jpg

20150926_153827.jpg

20151031_194143.jpg

20160302_085038.jpg

20160609_151845.jpg

20160728_113600_001.jpg

20160728_113621.jpg

20160728_114415.jpg

20160731_091241.jpg

20160731_091248.jpg

20151128_120823.jpg

20131202_143049.jpg

20160329_084210.jpg

Edited by WARLORD
  • Like 3

That Sinco manifold is a true work of art and it's not only me that thinks this....I've never seen such good fabrication!

 

Hey Nick, what is the puff of smoke towards the end of that run from rear cabin view? Is that when u hit the Flux Capacitor injection :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...