Jump to content
SAU Community

Recommended Posts

ahh the new corvette does use pushrods. There is nothing really wrong with pushrods either.

apart from higher reciprocating mass and limited flexibility for valve and timing arangements such as variable valve timing and multiple valve configurations.

its main advantage , smaller size , is not realy an issue in a smaller capacity forced induction or high output NA engine either

There are a few cars here in Australia that we Americans don't have, like the list indicated.

But in American we have a few cool in the BMW 3series line.

Cars under the OEM non turbo....Honda.....Acura TL....278HP 4 Door, Acura 4 Door 300HP; Nissan Infinite....GT35 ...298HP 2 doors, GT35 4 Doors 305HP; Toyota...Lexus..IS350...305HP.

All of these cars can have a single or twin turbo or supercharges add to them.

The price for these cars start $29K to under $40K.

In America you can purchase a BMW 335i Twin turbo>> 300HP&300FT for only $48000 walk out the door price<<<.

But I am so damn happy to be in OZ driving my 1996 GTS SII liner.

My American car was an Acura 2004 TL with a supercharger, CB, drop on OZ 19" wheels.

^^^

it's crazy how much beemers cost here, and even though the import tarrifs are so low now here imported new cars are still expensive it seems.

Oh well i wouldn't trade anything in australia for cheaper cars.

Cars currently available for sale that I'd love to see on Australian roads:

JDM Honda Civic Type-R

JDM Honda Integra Type-R

Caterham Superlight and CSR

Vauxhall VX220 (Turbo)

Pontiac Solstice

Nissan Skyline (V35 and V36)

Ford Mustang

Dodge Charger SRT8

I couldn't afford one but it would be nice to see a Carrera GT and a McLaren SLR on the road over here.

i'm pretty sure that motor magazine took a carrera gt for a strap through the NT to test out it's top speed, but i'm not sure. i will have to find the mag.

Cars currently available for sale that I'd love to see on Australian roads:

JDM Honda Civic Type-R

JDM Honda Integra Type-R

Caterham Superlight and CSR

Vauxhall VX220 (Turbo)

Pontiac Solstice

Nissan Skyline (V35 and V36)

Ford Mustang

Dodge Charger SRT8

there are quite a few v35 skylines in australia

Yep, I know.

I misread the thread as being "cars you want but your country's local divisions of car OEMs won't import" rather than "just can't get".

Otherwise, we can technically get any car in this country as long as we're willing to pay for it...and get a CAMS racing license and use it as a race only import.

How about cars I would prefer we WEREN'T Allowed?

Commodores (Especially VL's)

Falcon Utes

Done.

Every time you read about a P plater crashing and killing his 27 friends who were in the car, its a commodore driver.......every time you read of a P plater doing 240 through a school zone, its a commo driver.........

Nuff said.

How about cars I would prefer we WEREN'T Allowed?

Commodores (Especially VL's)

Falcon Utes

Done.

Every time you read about a P plater crashing and killing his 27 friends who were in the car, its a commodore driver.......every time you read of a P plater doing 240 through a school zone, its a commo driver.........

Nuff said.

uninformed reply of the year goes to

Care to explain what was 'uninformed' about it? I don't like commodores or falcons. Thats not a matter of being informed or not, its a matter of opinion.

That dickheads drive all makes and models and you've got your head in the sand or up your ass.

Right up there next to commodores and falcons in the confiscated list was....... you guessed, Skyline.

Every time you read about a P plater crashing and killing his 27 friends who were in the car, its a commodore driver.......every time you read of a P plater doing 240 through a school zone, its a commo driver.........

You must live in Boganville if Falcodores headline the "young driver menace" articles in your local rag.

In most major cities its grey imports that hold the pride of place when it comes to driving at stupidly high speeds through metropolitan streets.

Yeh, I have some Aussie friends who post here, and are always linking me to these forums, so I figured if I was gonna read all the posts anyways I might as well reply. This is the "General Automotive Discussion" forum is it not?

I'd also like to add the Toyota Chaser to my list.

yes this is the general automotive discussion.............for skylines AUSTRALIA ok

You must live in Boganville if Falcodores headline the "young driver menace" articles in your local rag.

In most major cities its grey imports that hold the pride of place when it comes to driving at stupidly high speeds through metropolitan streets.

Not according to the impound figures.

yes this is the general automotive discussion.............for skylines AUSTRALIA ok

This has to do with this thread how? There are many international members of this forums and they can post where they wish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...