Jump to content
SAU Community

Recommended Posts

plus optional GTR rear wing.. plus the usual options.. dual airbags.. hicas.. haven't seen one with an a-lsd.. also there are others including Momo steering wheel.. different gear knob.. "sports exhaust"..

I should print them all out of Nissan fast..

mines got the GTR wing, the momo wheel, and a factory nismo muffler, but still the stock exhaust (not 3" cat back etc).....

the momo wheel is porn by the way, i love it.

does the series 1 have the ciggy lighter light up and ashtray light up

when normal lights are on? i havent noticed it on any other series 1 33's. do all series 2's have this?

does the series 1 have the ciggy lighter light up and ashtray light up

when normal lights are on? i havent noticed it on any other series 1 33's. do all series 2's have this?

Series 1 ciggy lighter light up when normal lights are on.

Series 1 doesnt have ashtray light.

my is 95' r33,

soo it should be same as series 1.

speaking of rear windscreen washers (which im certain they ALL had from factory) so yours must have been removed (perhaps when the rear window was smashed and replaced..)

i cant get my rear washer jet to work? ive been told it feeds from the same bottle as the front, so i topped that up, front works fine, but rears doesnt spray...i can hear the motor trying to spray water, but not a drop...anyone able to help me?

Yeah same here Dezz. I could hear the motor goin but no action.

Then i found a nice little puddle in the boot one day after doing that :

And after pulling the carpet down that hides the battery i found a small clear hose thats wasn't goin

anywhere.

But for the life of me i cant seem to find where its supposed to connect.

speaking of rear windscreen washers (which im certain they ALL had from factory) so yours must have been removed (perhaps when the rear window was smashed and replaced..)

i cant get my rear washer jet to work? ive been told it feeds from the same bottle as the front, so i topped that up, front works fine, but rears doesnt spray...i can hear the motor trying to spray water, but not a drop...anyone able to help me?

It apears to have never been there. The MDF on the rear shelf appears to be factory with no hole for where the wiper would come from. The wiper stalk also does not have the rear control on it. ????

It apears to have never been there. The MDF on the rear shelf appears to be factory with no hole for where the wiper would come from. The wiper stalk also does not have the rear control on it. ????

It doesn't? The wiper control in mine is activated just like the driving lights except on the wiper stalk.

I have given up on trying to get it working. Not like i would use it that much anyway.

Hey there, got a link here, that shows you all the different models they came out in, just click on the year skyline you want, and shows you different models, might be of some help for some one.

http://english.auto.vl.ru/catalog/nissan/skyline/

let me know if it works ok.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...