Jump to content
SAU Community

Recommended Posts

  • 2 months later...

My R33 is a 95 series and I am sure its a 1.5 or whatever its called how can you tell?

mine is spec m and has got colour coded front grill with chrome S badge is an 05/95 build

has the side pods and all that it dosnt have lsd and not sure about abs, has the bigger squarer looking spoiler

and has the seatbelt arm things on the a pillar to make seatbelts easier to reach, and has drivers airbag, also

has vvt or whatever its called and is a 5 seater and it has rear wiper not sure about rear window washer as

I never use it, interior colour is sort of a darkish grey velour with black and light gray patterned genuine floor mats and has geniune

nissan wind guards which are a purpley colour on both driver and passenger doors they start at the front near the mirrors

and extend up to the roof running the full length of the window/door, it also has the electric hiccas 4ws (is that super hiccas?)

My R33 is a 95 series and I am sure its a 1.5 or whatever its called how can you tell?

mine is spec m and has got colour coded front grill with chrome S badge is an 05/95 build

has the side pods and all that it dosnt have lsd and not sure about abs, has the bigger squarer looking spoiler

and has the seatbelt arm things on the a pillar to make seatbelts easier to reach, and has drivers airbag, also

has vvt or whatever its called and is a 5 seater and it has rear wiper not sure about rear window washer as

I never use it, interior colour is sort of a darkish grey velour with black and light gray patterned genuine floor mats and has geniune

nissan wind guards which are a purpley colour on both driver and passenger doors they start at the front near the mirrors

and extend up to the roof running the full length of the window/door, it also has the electric hiccas 4ws (is that super hiccas?)

everyone on the forums should actually use links

http://www.motortraders.net/imports/select...p;model=Skyline

(*NOTE site linked above has been checked buy my best mates father who is head mechanic of Nissan Australia in N.S.W and all information provided matched with the Nissan stats on the Nissan computers at the workshop) reliable source please everyone refer to this

in relations to everyones questions

r32's were made in 1989 May and stopped production 1993 August (GTS-4 and GTR start production was August 1989-1993 August)

r33's were made in 1993 August and stopped froduction in 1998 May

r34's were made in 1998 May and stopped production August 2002

r32's come types not series :

FROM MAY 1989 - AUGUST 1993 (EXCLUDES GTS-4 PRODUCTION STOPPED IN NOVEMBER 1993)

(SEDAN ONLY, 4AT FR and 5MT FR) GTE type X < was the later model of a GTE (different standard features slight cosmetic design and more Optional features to choose from)

(COUPE ONLY, 4AT FR and 5MT FR) GTS type J and X < the later model of a GTS (different standard features slight cosmetic design and more Optional features to choose from) each type, J being (coupes) and type X being (sedans)

NOTE* This being the only r32 GTS (1998cc) to have a sedan and coupe under the same type

(SEDAN AND COUPE, 4AT FR and 5MT FR) GTS type S < (still called a type S but with different standard features slight cosmetic design and more Optional features to choose from)

(SEDAN AND COUPE, 4AT FR and 5MT FR) GTS-t type m < (still called type M but with different standard features slight cosmetic design and more Optional features to choose from)

(SEDAN AND COUPE, 5AT FR and 5MT FR. EXCLUDING GTS25 type X) GTS-t THIS MODELS PRODUCTION STOPPED AFTER AUGUST 1991 AND WAS REPLACED WITH GTS25 *NOTE this is N/A after August 1991

GTS25 introduced with two different models type S (coupes) and type X * G (sedans) *NOTE 2 MONTHS LATER MAKING GTS25 type X THIS WAS A SPECIAL EDITION SEDAN OFFERING MORE OPTIONAL FEATURES AND ALIGHT BODY WORK MAKING IT 20KG LIGHTER

(SEDAN ONLY, 4AT FR and 5MT FR)GXi type X < was later model of the GXi (different standard features slight cosmetic design and more Optional features to choose from)

From August 1989 GTS-4 was introduced

(SEDAN AND COUPE, 4AT FR and 5MT FR) GTS-4 (still called a GTS-4 but with different standard features slight cosmetic design and more Optional features to choose from) *TAKE NOTE THIS CAR GAINED 60KG

From August 1989 GTR was introduced

the GTR stayed the same from August 1989-1993 August then switching too r33

NISSAN REMODELED EVERY DESIGN LISTED ABOVE AGAIN IN NOVEMBER 1992 WITH THE USUAL SLIGHT COSMETIC CHANGE AND NEW OPTIONAL FEATURES AND STANDARD FEATURES. ( :P no point in saying what i just said again )

*NOTE all models listed were 1998cc (excluding X * G 1809cc) (GTS25 2498cc) (GTR 2568cc)

Well thats about it for 32's other than the Nur spec and such and bathurst it doe not get classed as Nissan and falls under NISMO make.

Now to answer the above question :( having vvt means its a series 2 engine. If thats factory engine it will be a series 1.5

all those things you stated are optional features for any r33 so its hard to say but the interior you said is series 1 and if the engine is original than its defiantly a series 1.5

:bunny: unless someone took your skyline apart and mixed and matched ....... a lot ;)

P.S a lot of people are getting confused with there series and saying things that are miss-leading

check the link and it gives you a list of optional features of all models from r32-r34

it will tell you straight away what series you have looking on the link

IF ANYONE WANTS ME TO DO R33'S

FOR WHAT I DID ON THE R32'S JUST PM ME AND ILL POST IT ON HERE

  • 1 month later...

just checked the the link given by centrel coast. and looks like the only non - turbos that come with LSD from factory are the E-ECR33 frame ones. i dont know if everyone has that one. Mine says E-ECR33 on the plate inside the bonnet. Which makes it a GTS TYPE S. i dont know if thats a good thing, since am a newbie to Skyline. just got mine a few days ago.

and the non turbo r33 without the LSD is the one with the E-ER33 FRAME.

other differences are:

GTS25 (E-ER33) is 140kw,

Standard features include - Rear spoiler, Rear seat lap sash belt, Side impact protection bars, Power windows, Central door locking, Steering wheel height adjust.

Optional features Limited slip differential, Front fog lamps, Rear window wiper, Driver airbag, Front passenger airbag, Anti-lock braking system, Navigation system, Leather steering wheel, Alloy wheels

GTS25 (E-ECR33) TYPE S is 147kw,

Standard features include - Limited slip differential, Rear spoiler, Rear window wiper, Rear seat lap sash belt, Side impact protection bars, Power windows, Central door locking, Steering wheel height adjust, Leather steering wheel, Alloy wheels.

Optional features Front fog lamps, Front spoiler, Driver airbag, Front passenger airbag, Anti-lock braking system, Navigation system

information from - http://english.auto.vl.ru/catalog/nissan/skyline/1993_8/ and http://www.motortraders.net/imports/select...e&period=79

Forgive mwa for any mistakes coz am a noobie. Lol.

Edited by VishR33
  • 2 weeks later...

I read the first few pages of this thread and then jumped straight to the last one so if this has been mentioned earlier, then I don't care...

Regarding the ABS being standard or not on the R33 Series II Turbo;

If it's a '96 SII, then ABS was an option whereas it cam standard '97 onwards.

And just another quick fact, the '96 came standard with a rear window wiper whereas the '97 did not....... :D

Edited by EeLeYe
  • 2 weeks later...

Yo, i just made a thread about series 1 and series 2 fronts before i saw this thread, so if anyone can enlighten me:

"Hey guys, banged up my series 1.5 r33 gtst, have to replace the front bar, bonnet and lights of a series 1 front.

If i change all these parts to a series 2 front, do i have to change anything else, like the side quarter panels etc?

Thanks!"

  • 1 month later...

Another thing Ive noticed is the rear number plate holder size is smaller on the series 1, some i have seen have had fold the plate at each end to fit in the space, where mine has more than enough room.

  • 2 months later...
  • 4 weeks later...
  • 4 weeks later...
Yo, i just made a thread about series 1 and series 2 fronts before i saw this thread, so if anyone can enlighten me:

"Hey guys, banged up my series 1.5 r33 gtst, have to replace the front bar, bonnet and lights of a series 1 front.

If i change all these parts to a series 2 front, do i have to change anything else, like the side quarter panels etc?

Thanks!"

Yes but you also need to change the grill and front 1/4 panels.

Lol I just bought my s1 - its my first car....

Please don't tease - Need some up side to it

Whats wrong with a S1, personally i dont like the front of the S2, the indicators look like they were an after thought stuck in the front bar, also dont like the interior material, looks like its out of an excel, and also the color coded panel between in indicators look better clear imo, keeps the lines flowing.

i think it depends...

If you got the s1 non m spec version (93-94) its pretty ugly...

However if you get the m spec version or series "1.5" with the updated front bar then it looks pretty nice.

However personal opinion really.

i think it depends...

If you got the s1 non m spec version (93-94) its pretty ugly...

However if you get the m spec version or series "1.5" with the updated front bar then it looks pretty nice.

However personal opinion really.

The only difference between the m-spec non mspec and s1.5 is that the mspec has wider openings in the sides of the front bar, the others look a bit plain but i wouldnt say they are ugly.

But thats just my personal opinion.

anybody know if the interior (ie. front and rear seats, door trim sections, A and B pillar moulds) are interchangable between S1 and S2 gtst?

I assume the pillar mods are the same, the rest is a common bolt in upgrade for S1 owners.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...