Jump to content
SAU Community

Recommended Posts

S12 gazelle notchback with IRS. $2000

CA18DET engine with loom computer + clutch $900

after conversion wind the boost up to 12 psi and you have a 130rwkw 900kg drifter that will be a lot of fun.

I have driven quite a few s12's and they are not a bad car.

just a shame the CA20E is only good as a paperweight..

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

for daily, you'd better hope you daily go to a workshop.

just like any bitsamissing from the late 80's to early 90's, they are an expensive adventure..

Yes they have power steering..

and the steering is too light..

There seems to be a small following (as with any car I guess) in japan..

you can find some pretty good looking ones.

but it's a money pit.

see if you can find one with a 4g63 conversion.. but then again, that will be over $10K..

if you want a daily driver/drifter you'd best stick to an S13.

Typical responses from people that know everything but have never owned a STARION!

The standard Australian delivery Mit Starion has a 4G63BT that is near unbreakable!

I am not even going to bother saying much more except I am selling my Skyline but I will NEVER sell my Starion!

Dean,

www.austarion.com has plenty of info about Starions with a healthy forum. I agree that Starions do have their pitfalls (as do most cars of that era). However, with the right advice, these can be overcome and not necesarily be too costly. As with most manfacturers new parts are expensive, but good used parts can still be found if you shop smart. Alot of the electrical/efi issues can be repaired/relaced by going to the MPI + aftermarket ecu set up which replaces the throttlebody + two injector factory "electronic carby".

I can recommend a good mechanic or two in Vic who know Starions inside out and whole also have one or two clean examples for sale.

Btw, this is my rare JDM widebody Starion:

post-4183-1184229264_thumb.jpg

post-4183-1184229273_thumb.jpg

As said up the thread the Aus spec JA (bonnet scoop) and JD (no bonnet scoop but with LSD) Starions had the 4G63, single turbo, TB injection, pwr steer (light), AC, elec glass, leather front seats, 5 sp man, etc.

For their time good strut susp with good solid wishbones, reasonable brakes, styling was a matter of opinion. From memory about 125kw std, 1240kg(?)

The 4G63 was good for about 360hp before rods (?) got a bit sad. Original spare parts were exxy. They take an Astron 2.6 conversion easily.

Some of the guys punted them in the production class on the track and they performed well.

I pushed one around for a while with bigger turbo, aux inj, crude eng mgt, intercooler, big brakes and 16" Simmons and it was good for nearly 180rwkw and a heap of fun to drive (if a bit peaky) and there wasn't much around then (mid 80s) that would touch it.

Actually miss the old girl at times.

I don't know how you would go these days getting one in any reasonable condition for the $ you're talking. Hell a replacement tubo will cost you more than half that.

Lots of luck though.

I agree, for $3K, you won't get much. However, if you look around enough, you can find ones that have had alot of $$ spent on them to rectify the old "eci" issues with MPI and ECU upgrades. Ie, find someone who has already doen the hahrd work and buy theirs :D

Can someone explain to me what the MPI and ECU upgrades are exactly??? What does MPI stand for?????

Whats it cost to roughly get that stuff done anyway? Please let me know, cos ive pretty much bought one........

The Mitsubishi G63B 2L SOHC engine in the Starion uses a throttlebody injection set up that consists of two injectors mounted inside a petrol chamber. This is fed fuel which fills the chamber and the two injectors then inject and spray the fuel into the head. Its an "electronic carbie" and is not ideal, with a few problems that develop over time. It can still be used effectively, especially if you do not want to go to the expense of multi point injection (MPI) as this means that an aftermarket ECU needs to be fitted to control the fuelling of the MPI's 4 injectors.

The two bolt on options for MPI are a 1987-95 Mistsu L300/Starwagon 2.4L G64B intake manifold which doesnt require any mods, or a Hyundai Sonata MPI manifold, which requires a few mods to work as it will face the firewall. Most who do these mods usually also add an intercooler at the same time to amalgamate efficient cost savings in manufacturing the piping and also tuning in the one go.

Having said this, going to MPI is not necessary, but most people do it as both a power upgrade and also as a means of getting rid of the troublesome fatory ECI.

Which car are you buying, Dean?

ok guys i checked out the starion.. was a joke.

Supposedly had a rebuilt motor & gearbox and oh guess what?? No receipts.. hmm guess he lost em?

-Before i had gotten there, the guy had, had the car running for a while so that it runs.. barely.

-Took the car for a 2 minute drive, once back the rocker cover was a pool of oil.

-Power steering rack was drenched in fluid. Apparently he topped it up every 1-2 weeks & admitted he had gotten

quotes of no less than $1,200 to fix it cos parts were so rare/expensive.

-Interior was a joke, driver seat was all torn, plastics missing everywhere, wires hanging from everywhere.

-Car honestly had no more than 40 rear wheel kw's. He showed me a dyno sheet from NT performance showing 82.6kws!,

LMAO this car was honestly slower than a n/a 200b datsun that had just finished being thrashed & overheated on a farm.

-Sunroof was aftermarket, not genuine, hence leaking.

Honestly this car was a MASSIVE turn off on the starion. Im not going to bother looking at another one again.

Can someone please find me a worked Gazelle any other small rwd, RELIABLE manual drifter!?

KE70 corolla perhaps?

4AC engine is supposedly a bit gutless, but you should be able to pick one up for around 2k if you look, and then factor in 1k to throw a 4AGE into it...

R31 out of the question? very cheap to buy, plenty of grunt, and S13 parts (suspension/brakes) bolt straight on, so cheap and plentiful aftermarket support, aswell as VL turbo parts for massive power-ups

but if u want the small lightweight thing, then definately keep it toyota as mentioned above ^

Edited by VB-

A starion turbo was my First car, i bought it almost 6 years ago.

To this date, I cant stress what a great car it was, and what a great car they are. It rarely gave me trouble and I thrashed the hell outta it, I was a year 10 student at the time so I couldnt afford anything else. Imports were few and far between and extremely expensive back then. I had it for two years!!

Ive had quite a few imports, and even still, i have to rate Starions as one of my favourite.

The sad thing is, 90 percent of starions left, are all neglected, bodged up and tired. In melbourne ive noticed this anyways.

They have so much to offer that most cars built in the 80s hadnt heard of - and there rare.

Everyone these days are going the skyline, silvia, R31, Corolla for slide cars - what about something a bit left wing! Dont be put off because you seen a hack, theres many types of the abovementioned cars that ive seen that are in similar condition. The single cam motors are strong, the turbos are good if they are looked after, good oil, a seal kit etc.

In a few years I will buy a widebody Starion to Restore from the ground up, they are the Forgotten Classic Japanese sports car.

It puts a smile on my face every time I see one out and Im glad that there are people out there that value the old Japanese classics.

Edited by Starionturbo

4AGZE datto or corolla FTW! Loved the 4AGZE I had, genie extractors, 2.5 inch exhuast and a pod filter and it was beating VR/VS SS manual commodores in an AE82 heavy as SECA! Awesome little build that would be and the engine is so powerful and responsive, way more impressive than my RB20 lol.

Liam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...