Jump to content
SAU Community

Recommended Posts

yeah half cage is ok, I have a full cage for mine, but the front half gave me the shits on the street as the drivers side 'leg' is pretty close to the throttle and kind of annoyed me, but it was definately much better with the full cage. so if you are getting a cage I say go full cage with front half removable. Car is a little stiffer with the cage and if I roll it over it should hopefully stop me dieing. plus it gives me a handy spot to mount my camera! :D

if your still free and in the country...come whoop all our asses in rd3 of the state championships! 29th and 30th september.

I would rather be beaten by another nissan then a stupid toyota.

Now now Michael, thats not very nice of you. You've hurt my poor cars feelings now...

wow...im suprised your on here buddy.

this is my territory...you cant come on here in nissan country. I dont hang out on supra forums and what not.

but its true...id rather be beaten by a nissan then a toyota.

Cheers Angus!

Are there any good places in Sydney to have chat with about the cages?

hey mate west side mufflers at padstow.

they will do whatever you like when it comes to cages, they do alot of approved cages for race cars from all different classes

9773 7244

Edited by Angus Smart
specs John?

Angus,

Cheers mate!

Car-

1993 Toyota JZX90 Mark2

Engine-

1.5JZGTE 445rwhp @ 18psi

JE 86.5mm forged pistons

HKS 264 degree intake and exhaust cams

GReddy 1.4mm metal headgasket

Titan vernier cam gears

Custom plenum chamber

Nissan VH45 throttle body

Power FC

GReddy front mount cooler

HKS T04R turbo kit

Sard 650cc injectors

Custom 85mm radiator

GReddy oil cooler and remote filter

Blitz twin plate clutch

R154 5 speed gearbox

Suspension-

TEIN Circuit Master coilovers

Cusco front upper camber arms

Cusco tower bars front and rear

Ikeya Formula rear upper camber arms

D-Max rose-joint rear suspension kit

TRD LSD 4.3 ratio

Alcon 4 piston front calipers, 343mm rotors

Supra 2 piston rear calipers, 324mm rotors

Braided brake lines

Performance- Qld Raceway

National circuit- 1 min 16.3 sec

Clubman circuit- 57.22 sec

Sprint circuit- 54.36 sec

Sportsman circuit- 54.14 sec

Edited by Stupid Toyota

Car-

1993 Toyota JZX90 Mark2

Engine-

1.5JZGTE 445rwhp @ 18psi

JE 86.5mm forged pistons

HKS 264 degree intake and exhaust cams

GReddy 1.4mm metal headgasket

Titan vernier cam gears

Custom plenum chamber

Nissan VH45 throttle body

Power FC

GReddy front mount cooler

HKS T04R turbo kit

Sard 650cc injectors

Custom 85mm radiator

GReddy oil cooler and remote filter

Blitz twin plate clutch

R154 5 speed gearbox

Suspension-

TEIN Circuit Master coilovers

Cusco front upper camber arms

Cusco tower bars front and rear

Ikeya Formula rear upper camber arms

D-Max rose-joint rear suspension kit

TRD LSD 4.3 ratio

Alcon 4 piston front calipers, 443mm rotors

Supra 2 piston rear calipers, 324mm rotors

Braided brake lines

Performance- Qld Raceway

National circuit- 1 min 16.3 sec

Clubman circuit- 57.22 sec

Sprint circuit- 54.36 sec

Sportsman circuit- 54.14 sec

VERY VERY NICE !!!

AWSOME LAP TIMES TOO!!!

There the kind of lap times we need to get to.

Fantastic job

cheers russ

HA! i knew it, its the nissan throttle body thats making the toyota so fast!

I agree 100% definatley the Nissan throttle body helping with the speed. Very impressive lap times there will look forward to seeing your car in action sometime soon. I hope i can match or better those times when my car is finnished (depending on driver skill) as it will be a bit demoralizing being beaten by a toyota little own a bright pink one. :)

update.

no more main parts yet! :)

windows are here, dash is in and wired (finishing of the stack set up)

seat and pedal box in, need doors and suspension!

BTW car may be on show at the tokyo autosalon in January! haha somehow i dont think it will look as good as the new 2008 gtr launch!

cheers russ

still on track for 15th hopefully (shakedown only though)

Car-

1993 Toyota JZX90 Mark2

Engine-

1.5JZGTE 445rwhp @ 18psi

JE 86.5mm forged pistons

HKS 264 degree intake and exhaust cams

GReddy 1.4mm metal headgasket

Titan vernier cam gears

Custom plenum chamber

Nissan VH45 throttle body

Power FC

GReddy front mount cooler

HKS T04R turbo kit

Sard 650cc injectors

Custom 85mm radiator

GReddy oil cooler and remote filter

Blitz twin plate clutch

R154 5 speed gearbox

Suspension-

TEIN Circuit Master coilovers

Cusco front upper camber arms

Cusco tower bars front and rear

Ikeya Formula rear upper camber arms

D-Max rose-joint rear suspension kit

TRD LSD 4.3 ratio

Alcon 4 piston front calipers, 343mm rotors

Supra 2 piston rear calipers, 324mm rotors

Braided brake lines

Performance- Qld Raceway

National circuit- 1 min 16.3 sec

Clubman circuit- 57.22 sec

Sprint circuit- 54.36 sec

Sportsman circuit- 54.14 sec

Awesome times, Slicks or semi slicks??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...