Jump to content
SAU Community

Recommended Posts

hey phunky, yeah just saw the ignition dvd tonight, turned out good! and yeah you would love it there , certainly gets the blood pumping!!

hopefully we will try to get back there at the end of the year with the r34, all going okay

pauls twoogle , is one beautiful looking r32 too ! it's a credit to him.

ross, yeah, the oil to water oil coolers are great, we are seeing much lower engine oil temps now! before we were seeing up to 130 degree's!

cheers russ

I was going to bite... but.... what the hell. How could I ever compete with something like your R33 Michael. I can only dream of having the same budget, Power and Grip you do. So laugh away, Laugh at my skyline that can only have realy bad suspension geometry because it is so low. Or maybe I've read widely, spent hours making and developing my own parts to overcome the rollcentre issues and other normaly untuneable aspects of an R33.

So yeh, it is a drift thing that forces the guys at the pointy end of drift to research, make and test stuff to get thier cars to do what they want them to do. Because after all, what happens when drifters get over drift and start to explore other avenues of motorsport???? They get laughed at by knobs who think drifters are just silly kids with way too low cars.

i like drift, !

and our next car will be on the deck, none of the cars i saw in japan (other than ours) was more than about 2/3 inches off the deck.!! awsome

like you say just need to do home owrk on geometry an so fourth.

our next car will be on the deck, none of the cars i saw in japan (other than ours) was more than about 2/3 inches off the deck.!! awsome

like you say just need to do home owrk on geometry an so fourth.

Most of them don't know/care about suspension geometry, they just stick rediculous spring/shock rates in them and there is no movement, so geometry is irrelevant. Then they have to stick new super soft tyres on for every run in an attempt to mask the suspension issues.

You kicked most of their asses last year with a comparatively miniscule budget, almost zero practise and infamiliarity with the event and the circuit. Don't fall into the copy cat trap, take the technically superior high ground.

Cheers

Gary

Most of them don't know/care about suspension geometry, they just stick rediculous spring/shock rates in them and there is no movement, so geometry is irrelevant. Then they have to stick new super soft tyres on for every run in an attempt to mask the suspension issues.

You kicked most of their asses last year with a comparatively miniscule budget, almost zero practise and infamiliarity with the event and the circuit. Don't fall into the copy cat trap, take the technically superior high ground.

Cheers

Gary

gary you are absolutely spot on with those comments, it was the first thing we noticed with there set ups.

So yeh, it is a drift thing that forces the guys at the pointy end of drift to research, make and test stuff to get thier cars to do what they want them to do. Because after all, what happens when drifters get over drift and start to explore other avenues of motorsport???? They get laughed at by knobs who think drifters are just silly kids with way too low cars.
Yes! And if it wasn't for silly kids with low cars we wouldn't have parts like this.

photo.jpg

gtr_r_c.jpg

I mean really all they are doing is playing make-believe-GT-racer so they want their car to look like GT500 cars.

And tyres are cheap in Japan anyway, so slap in some steel rods, slam it on the ground and slip on some super softs! :(

Oh and if you get a chance run my signature (which i have had for ages) through Google Translate :D

車高の低さは知能の低さ!!!

http://translate.google.com/translate_t?langpair=ja|en

And below is my racing machine... it is slow, but fun

post-662-1207971861_thumb.jpg

Edited by Laurence

Not since I lost my licence for street drifting unfortunately... >_<

My old car had high rollcentres which is actually quite dangerous, I reckon if the roll centre is under the ground then the car can't roll above the ground! :/

post-662-1208003163_thumb.jpg

post-662-1208003174_thumb.jpg

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't think the shuffle can damage the turbos. It only happens at low shaft speeds and loads. It's just annoying (to some people - others are tickled by the effect) and it quite possibly reduces spool performance a little bit.
    • Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
×
×
  • Create New...