Jump to content
SAU Community

Recommended Posts

This is cheaper than buy+build a dedicated r32 gtr which I was doing before I sold it and bought this. It's also very basic underneath which is great for a mechanical novice like me, and if the motor blew it would be cheaper to just buy another standard engine than get it rebuilt. It's also faster than the r35 gtr around Oran Park so im happy with that pace for now :ermm:

This will use less fuel in a day than what my tow vehicle will to get me to the track and will be about 4000% more reliable and fun than a gtr. I wanted something that I could push off the trailer, have some fun, tow it home and park it until the next outing, not like a car which always needs more brakes, better suspension, more power and less weight that you could easily spend $5k on after each outing.

Who knows, might get in it and not like it at all, thats part of the experience.

Fair call. I wasn't knocking your decision at all.

I have also gone down the cheap non registered track car path so understand in that regard. Unfortunately i am in the process of throwing money at mine to make it faster even though it's a lot of fun as it is...

Ben,,,I love your thinking mate. Thats exactly the reason I bought the Radical.

Last year I did almost every NSW state hillclimb,,,every state supersprint,,,5 trackdays,,,2 practice days and the cars still fine.

I think the only part of owning her that may be a down side will be scaring the shit out of yourself. You will like it,,,trust me.

R35 GTR's pfft,,,I'll show you a vid one day. I'd hazard to quess there would be maybe 6 Skylines on SAU that would give yours or my car a run for there money.

Neil.

Was only just emailing someone saying that any good track car makes you do irrational things with scary sums of money. I have not driven my car at the track in 18 months, though it has still been on the road as i have been busy saving and compiling parts for the current goodness being thrown at it.

I would have been better to buy a new stock GTSt and throw all my good gear at it and had two cars for what the bodywork is costing me :sick: But i do love my car and it will always be my car...so could never replace it with another GTSt simply because it woudl be cheaper....you dont turn your back on good friends :P

I prey to fark that in 6 weeks when it is back on the road i can just enjoy one of the loudest cars at the track that is a hoot to drive. I have given up on the chasing times and gone back to focussing on making the car fun and cheap as possible (relatively) to run at the track.

If you dont mind me asking what are the kits worth or can you post a web site for a look.

Cheers

Well unfortunately due to the dollar dropping its ass over the past 6mths you won't get 1 of these for under $40k on track, because of this the Australian Distributor has put it on the back burner until the dollar goes back to something respectable. However for $40k you are starting to get into low end Radical territory which would be a nicer option :sick:

Here is the website for the American Manufacturer: www.babygrandracing.com

that looks awesome Ben!! Cant wait to see it out on the track mate!!!

I get my new toy next week when Im back from the US!!

Or should I bring one of these back with me...? lol

Well unfortunately due to the dollar dropping its ass over the past 6mths you won't get 1 of these for under $40k on track, because of this the Australian Distributor has put it on the back burner until the dollar goes back to something respectable. However for $40k you are starting to get into low end Radical territory which would be a nicer option ;)

Here is the website for the American Manufacturer: www.babygrandracing.com

Thanks for that. I'm at the stage were I have done a bit of work on the old 32 and now its time to spend the money on getting the set up right or do I cut my so far minimal loss' and save the extra for something like what you have. Hmmm the time to decide. :D

Cheers

Have done a few more bits and pieces to the car... the plan is PI on the 4th of April... *fingers crossed*

Making a template for the alloy boot false floor:

post-8405-1236208230_thumb.jpg

Finished floor

post-8405-1236208378_thumb.jpg

Box for the Fuel system:

post-8405-1236208259_thumb.jpg

Drivers seat and harness in. Love that seating position, shoulder below the door line :)

post-8405-1236208406_thumb.jpg

Brakes fitted and bled (Thanks Stu!)

post-8405-1236208297_thumb.jpg

post-8405-1236208348_thumb.jpg

That's the trap I guess... my car was fine before I pulled it off the road. Now I'm poor, haven't driven it for 2.5 years and it will be a little quicker...

i know that all to well although i blew my last engine up, now i havent driven my car for about a year and a half and just keep spending more money on it though it should be bloody fast when i finish it.

nice intereior setup on ur car phunky. have you extended your steering wheel out at all? it seem to come out a long way...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...