Jump to content
SAU Community

Recommended Posts

Oh hai

Yes thread of S13's lately so thought my failvia should make an apperance...

Nothing special

GT28r

Step 1 cams

FMIC

Pod Filter

Z32

PFC

ProfecB

Tein

5 stud conversion

So far an ugly 1:10 @ Wakey, a 1:22 (first time) at OP GP... so has great potential unlike the driver!!

Pics FTW

post-263-1241779902_thumb.jpg

Yeah yeah i know im half off teh track... cold semis + understeer :D

post-263-1241779925_thumb.jpg

Nothing special

Bloody autosalon car....

With the times you were getting at MDTC you will be into the low 9's next time at wakefield if you drive it the same way.

I'm back at wakefield tomorrow, hope to crack a 10 for it's last NA outing there. Should be fun.

new engine, almost ready

05042009031.jpg

Oh well here it is.

It started as a nice street car when I bought it albeit with a massive body kit...which is now safely tucked away under my parents house, so its back to a standard non M-spec front bar, no skirts and the little drift lip/wing/spoiler

Split an oil cooler line 2 weeks after I got it and junked the original motor, so got it rebuilt and It lasted 2 years before breaking a piston ring.

So now its getting a standard bottom end I bought for 200 bucks.

while im was doing this I thought id get a few goodies for it.

Its pretty basic for a R33 Chassis wise consisting of Jap Spec Tein Super Streets, Adjustable rear upper arms, Adjustable Caster Rods, Tomei Hicas Lock Thingy, RDA slotted rotors on the front with QFM pads in there now, Used to have APexi Pads which were by far better but I cant seem to find them anymore.

Engine/Driveline Wise Its got an Ebay exhaust manifold, 38mm gate, and a KKK K27 Turbo, Greddy Copy Plenum, OS Giken Twin Plate Clutch (the good 600hp one) 50mm Radiator, Oil cooler and relocation kit, Used to have a Power FC Pro...but I sold it, so its back to standard Injectors, AFM and ECU untill funds allow. So no track time untill thats all sorted :mellow:

Wheels are 17x8 URAS NS-01s all around with average firestone tyres...mind you the went ok at wakie when I was there last.

Finally it has a "drift" brand seat which does ok but sits too high for my lanky ass.

So Semis are on the list aswell and so is a better drivers seat and a some what less ricer interior :)

post-16947-1241786367_thumb.jpg

post-16947-1241785328_thumb.jpg

post-16947-1241785570_thumb.jpg

post-16947-1241786187_thumb.jpg

Bloody autosalon car....

With the times you were getting at MDTC you will be into the low 9's next time at wakefield if you drive it the same way.

I'm back at wakefield tomorrow, hope to crack a 10 for it's last NA outing there. Should be fun.

new engine, almost ready

05042009031.jpg

mmmmmmm nice turbo Dave, it looks familiar. was'nt the one on the R32 internal gated???

lol, can't weld plastic to metal steveo! and I wouldn't want to use the shaft weleded as a shifter. gearnobs just screw on my man.. there are a few getting around. snap-on screwdriver handle gear knobs. they even make snap-on screw driver handle keys. so it looks like your starting your car with a screwdriver.

and yes the snap-on screwdriver gearknobs and keys are the height of cool! I might grab some next time I see 'em. :) I'll even buy you one for Christmas steve and we can weld it to your shifter on boxing day. :P that's the kind of guy I am.

You cant weld plastic to metal? Wow, news to me :D

I meant cut off the metal shaft half way and weld big man

So we've had dildo knobs, screwdriver knobs, whats next?

Bloody autosalon car....

With the times you were getting at MDTC you will be into the low 9's next time at wakefield if you drive it the same way.

I'm back at wakefield tomorrow, hope to crack a 10 for it's last NA outing there. Should be fun.

new engine, almost ready

lol it will neva live down its autosalon beautifulness :)

Not fussed about beauty just how it goes!

Yeah i was pretty chuffed with the 43.7 @ MDTC (keeping Ant honest) but i totally agree with it being capable of sub 1:10's... i know it can do it easily as the 1:10 i was doing was just so so terrible... brake shudder, +5mm toe out on rear (stock toe arms are fubar'd) and only able to get 3 laps out of it before it became undrivable... but thats motorsport and i know next time its a 1:09, or if it is a special day.. a 1:08 sumsing.... :P

Let me know who the silvia goes/went today!!!

mmmmmmm nice turbo Dave, it looks familiar. was'nt the one on the R32 internal gated???

same turbo, new housing :) i am not going through those boost control issues again.

So anyway, despite a horrible understeering pig of a car at the start of the day and me thinking i'd be lucky to be doing 13's i was surprised to see a best time (freak lap) of 1:10.3 or so from a previous best of 11.7. Not bad for the addition of some rear camber and a few poly bushes.

Added a bit of front toe out, dropped the front tyre pressures to the point where it was feeling pretty good and managed to get it to 10.1 with a lot of 10 second laps strung together. My mate was also driving and managed to crack a 9.9 something in it during the last session the bastard.

It really needs a bit more front camber but i just didn't have the adjustment left in it to get any more so it would still understeer horribly in a couple of situations but was reasonably happy everywhere else once i figured out how to get it to turn in.

No prob, if you have a vin I have fast so I should be able to get the number if you dont have it at hand.

Ross

Hey Ross, I've decided just to grab the whole pump assembly from the states mate as it's quick and not too expensive. Thanks againfor your offer though, very much appreciated! Did you go ahead with you rewiring kit in the end?

Oh, and good news, engine is apart and all is well. Thank fark for that!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...