Jump to content
SAU Community

Recommended Posts

Okay,

Went in expecting around 180ish rwhp, as my car was misfiring on 7psi..... *sigh*

Pulled 208.8hp@7psi (not bad for stock boost) with a power curve that looks like a set of stairs....

I gots Zorst (w/front pipe), POD, Cold Air, and stock boost...

after having a chat to steve he commented that the timing was retarded a bit, and suggested i advance it a bit for more power... what a difference that made! was able to up the boost to 11psi, no misfiring at all, and the power pulled all the way to redline... DAM.. Kym wants another run!!!!!!

Thanks for the advice steve, i'll be back to tune the new AFC and EBC real soon...

-Kym

edit - Mod :don't forget the no cat kymbo which gives about 10-15 at the rears from the cars i've seen with it and without it.

Link to comment
https://www.sau.com.au/forums/topic/18310-sst-dyno-day-post-your-results-mods/
Share on other sites

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

I hate to steal their thunder.....but :D

There were 2 manual NA RB30's R31's both around 135rwHP

And a very sweet lookin Manual RB20DET GTS-X which put down 137rwHP

I think my wagon was a off the pace due to being auto...manuals were held in 4th, my auto was in 2nd I believe. :O

Originally posted by adam 32

strich9: so your car was misifiring cos the timing was retarded?  

what revs was it misfiring at? (i only ask cos ive got a bit of a flat spot at the moment im trying to sort out)

Yep, Sure was Adam. As soon as I cas-bashed it a bit 2mm (on the cas) advance, all the misfiring stopped except for a small pop ord two between 4-5rpm. Immediately the car pulled like a train and I was able to wind the boost all the way up to 11psi. I HAD to run 7psi before or the misfire was really bad...

It also had MAJOR flat spotting before the timing was corrected.

Attached my dyno sheet :D

dynosst.jpg

343.6 at 1.2 bar on std ceremic terbs with boost control going all over the place. No damage done and boost control now sorted (I wound up the boost and left the duty cycle at a default 60% which is way too high compared to what has been "self learnt" for the lower 1.0 bar boost).

Mods: HKS engine pipe, Jap spec cat, HKS Hiper Zaust, PFC with boost kit. Normal boost 1.0 bar delivered 318 hp atw previously.

Mine managed to get itself to 210.2 HP. Got to 198 with nothing tuned then Steve quickly added fuel to my top end which got me to the 210. Will have to get my S-AFCII tuned properly and wind a bit more boost into her. Might help if i make a partion for my HKS pod, damn that thing's noisy.

For mods, see signature. Note: Nothing tuned yet....

Originally posted by S13_Angel

233.7hp @ 12psi

fmic, pod, 3" zorst (turbo back), badbiki.

very impressive angel, no wonder shes such a sleeper

as for me see the sig its got all the info, theres more roomto play but i don't think it would reliable then

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...