Two.06l Update (twoogle)

[Swiper the Fox]

Come on softy... he's only got 3.5 SECONDS and 100MPH on you!

would love to score a run with Victor Bray actually....that would be a blast.

Racing someone who you look up to with so much respect and admiration for would be awesome.

Would be akin to Duncan racing Jim Richards around Bathurst or Theo Wollett racing Theo Wollett!

Edited December 16, 2009 by DiRTgarage

[2rismo]

MEGALOL!!!!!!!!!!!!!

[Cartman]

lmfao thats gold.

[Deano45]

Ben Bray 3000hp 2700lb Top Doorslammer vs Paul Diemar 1000hp 3400lb Street GTR

Its going to be a massacre!!

Get Ben to bring his Datto ute to even things up a bit

[Swiper the Fox]

Get Ben to bring his Datto ute and leave the glide in 1st the whole run to even things up a bit

fixed

[Swiper the Fox]

Had an issue with the new fuel pump...it was leaking due to a faulty seal. Got it rebuilt...now good to go.

Tuning next week...racing next weekend.

[NYTSKY]

All the best

[aphid]

What day(s) are you racing at Willowbank on? I shall try and head down for some SAU moral support

[Swiper the Fox]

What day(s) are you racing at Willowbank on? I shall try and head down for some SAU moral support

2nd and 16th of Jan.

The Bray's are out of our class now but still quite a few 6 sec cars to race against

Would be good to see some support for the Nissan's. Hopefully Mark's car will be ready for the event on the 16th...full tilt at the world record is on the cards if we get it finished.

Edited December 25, 2009 by DiRTgarage

[Swiper the Fox]

on my way to the track right now.

tuned and ready to rumble.

[JAGR33]

Good luck Paul, don't be scared to hold it flat!!!

[Swiper the Fox]

Good luck Paul, don't be scared to hold it flat!!!

Held it flat...no clutch...broke 3rd-4th selector in the dogbox.

Box out on monday to modify/repair...back racing on the 16th.

Back to clutching it...at least then i can bring it home in one piece.

Need to purchase the uber expensive ex-HRT ignition cut gearknob and control box if i want to flatshift it. Until then its back to using the clutch to unload the drivetrain between gears.

Car is making huge power and sounds like an animal. The anti-lag blew a nice hole in my Trust PE-II exhaust on the dyno the other night while testing it.

[zebra]

any half track times?

[bigmikespec]

Unlucky mate, hope you can save the exhaust at least! Did it part at one of the v-band flanges?

Good luck in getting it sorted for the 16th.

[Swiper the Fox]

Unlucky mate, hope you can save the exhaust at least! Did it part at one of the v-band flanges?

Good luck in getting it sorted for the 16th.

the hole blew out at the rear...right on the bend before the rear muffler....the bang wanted to go straight out not turn the corner and go out the rear.

the selector is a PPG billet item...will be re-engineering it to make it stronger. The box itself is a-ok.

Edited January 3, 2010 by DiRTgarage

[Cartman]

the hole blew out at the rear...right on the bend before the rear muffler....the bang wanted to go straight out not turn the corner and go out the rear.

the selector is a PPG billet item...will be re-engineering it to make it stronger. The box itself is a-ok.

HAHAHA NICE! 

[Marko R1]

paul, you need 1 of those rips racing exhausts like what rob has on his dragster equipped with an rb26/30 and big single, 4inch pipe which measures about 500cm in total length

[Mr. Untouchable]

500cm or 50cm?

[fatz]

thems the breaks!

[Swiper the Fox]

thems the breaks!

yeah i always say..."if you can't afford to break it...you can't afford to race it"

I think there may have always been an issue with the box...ive only ever got one good pass out of it since ive fitted it.

Ill call Simon at PPG tomm. and see if i might be putting the wrong oil in it...just to rule that out.