sewid Posted September 11, 2007 Share Posted September 11, 2007 Could this be yet another Japanese magazine printing a wish list + photoshops as an article claiming to be the real specs or will this be the final engine spec??? Who knows: http://www.7tune.com/?p=106 Holiday Auto broke the news about the existence of a VR based GT-R engine last month, and since then has gone one further and given us a actual alphanumeric designation: VR38VETT. The VR38 is actually a recreation of the famed VRH35L V8 powering the R390 Le Mans car albeit in V6 form. A lot of knowledge gained from Group C and endurance racing has allowed Nissan to take the performance aspect of the GT-R that little bit further (over say, a VQ based engine) by taking the basic design of the VR38 and using it for the new GT-R’s V6 engine block and cylinder heads. A surprising feature of the twin turbo system is the ‘Integrated Exhaust Manifold Turbine’ where the exhaust manifold and turbo exhaust housing are formed as one piece. We’re told this is for weight saving, packaging and high response and was chosen over the more costly ‘motor assisted twin turbo system’ that was predicted way back in mid-2004. What all this has resulted in is an engine design that could be viewed as two 1.9L straight 3-cylinder DOHC turbo engines joined by a common crankshaft, with separate intake manifolds and throttle bodies for each bank. The intake manifold is actually the centerpiece of the engine bay, its intake runners being used as a design feature of the VR38VETT as shown in the CG mock up image shown below. Hey i see they're using those new "blembo" brakes i hear so much about Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/ Share on other sites More sharing options...
Yawn Posted September 11, 2007 Share Posted September 11, 2007 Yeah saw that a few hrs ago. If its true then the new GTR is pretty heavy But its century sprint is supercar rivalling Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3341732 Share on other sites More sharing options...
sh@un Posted September 11, 2007 Share Posted September 11, 2007 VR 3.8L lol 1750kg!!! fat bish of a 'Line Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3341822 Share on other sites More sharing options...
baron25 Posted September 11, 2007 Share Posted September 11, 2007 568Nm from stock sounds nice though. Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3341952 Share on other sites More sharing options...
sh@un Posted September 11, 2007 Share Posted September 11, 2007 Less torque than a 911 Turbo, and heavier not looking good p.s I notice the price for a GT-R comes out at $142,250 if you take the values of each in Yen, and then transpose the price of a Turbo in Australia into the equation. hmmm.... Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3342325 Share on other sites More sharing options...
Rezz Posted September 11, 2007 Share Posted September 11, 2007 Don't get too depressed, those are just Holiday Auto's estimates. They said themselves that it was what they expected the specifications to be and might differ slightly. How much? Who knows... just wait until the end of next month Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3342693 Share on other sites More sharing options...
sh@un Posted September 12, 2007 Share Posted September 12, 2007 it's gunna seem to take longer to arrive than christmas day does for a 7 year old Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3344705 Share on other sites More sharing options...
scathing Posted September 12, 2007 Share Posted September 12, 2007 Hey i see they're using those new "blembo" brakes i hear so much about I know a genuine Panaphonics when I see one.......... Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3345499 Share on other sites More sharing options...
scathing Posted September 12, 2007 Share Posted September 12, 2007 The VR38 is actually a recreation of the famed VRH35L V8 powering the R390 Le Mans car albeit in V6 form. A lot of knowledge gained from Group C and endurance racing has allowed Nissan to take the performance aspect of the GT-R that little bit further (over say, a VQ based engine) by taking the basic design of the VR38 and using it for the new GT-R’s V6 engine block and cylinder heads. I find the second half of that paragraph to be a bit specious, though. Firstly, the R390 hasn't been raced since 1999 and no-one else has used that block for racing since. So that's almost 10 years of no R&D for racing applications. The game as moved on a lot since 2000. The VRH block is based on the VH45DE, which is still in production....in luxo barges. Hardly a test bed for a supercar engine. The VQ block, on the other hand, has been the SuperGT powerplant for Nissan since the RB was removed from the GT500 Skylines in 2003, and continued in the FairladyZ's. The VQ30DETT is currently Nissan's engine of choice in Japan's top-tier motorsport category. Given that the VQ is the current "racing pedigree" design, and doing quite well, I'm not entirely sure I can see how the abandoned VRH gives Nissan "more performance headroom". Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3345500 Share on other sites More sharing options...
Rezz Posted September 13, 2007 Share Posted September 13, 2007 I find the second half of that paragraph to be a bit specious, though.Firstly, the R390 hasn't been raced since 1999 and no-one else has used that block for racing since. So that's almost 10 years of no R&D for racing applications. The game as moved on a lot since 2000. The VRH block is based on the VH45DE, which is still in production....in luxo barges. Hardly a test bed for a supercar engine. The VQ block, on the other hand, has been the SuperGT powerplant for Nissan since the RB was removed from the GT500 Skylines in 2003, and continued in the FairladyZ's. The VQ30DETT is currently Nissan's engine of choice in Japan's top-tier motorsport category. Given that the VQ is the current "racing pedigree" design, and doing quite well, I'm not entirely sure I can see how the abandoned VRH gives Nissan "more performance headroom". The VQ30DETT is Nissan's current engine of choice for Japan's top-tier motorsport category did you say? You're a bit behind the times there Did you also not read this part: ...the VK45 from the Nissan President wasn’t an engine worthy of the ‘R’ in the GT-R’s badge. Although it could satisfy the power, torque and driveability deemed necessary for the GT-R, the way in which it delivered those attributes was more befitting of a large saloon than a GT car. There was also a status problem, the VK45 being associated with Nissan’s luxury sedan would cause problems with potential GT-R buyers who were looking for more exclusivity… well exclusivity is what they got. ... it's not entirely about super dooper RB26 busting performance. Exlusivity plays an equally big part as does ultimate performance. Thats why the engine isn't a VQ, and that's why the engine isn't a VK. It's funny you say the VRH35L is hardly a test bed for a supercar engine when the VQ has been ditched this year in favour of a VK for the GT500 Fairlady Z. It's not like Nissan had a few 1999 VRH blocks lying around and has 'blown off the dust' and used them again 8 years down the track. The new engine - according to Holiday Auto - is a recreation of the VRH35L albeit in 3.8L V6 form with VVEL (2007 tech right there), twin turbos with integrated exhaust manifolds (never heard of that before), semi-wet sump, and Euro 5 compliant emissions. So the game has lifted since 2000? Good thing the new GT-Rs engine has too Btw, the VK is based on the VQ, not the VRH (VH) Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3346014 Share on other sites More sharing options...
pixel8r Posted September 14, 2007 Share Posted September 14, 2007 I think the pic they have in the article looks hideous compared to the ones pictured in videos recently. I'd say the video evidence is a lot closer to the mark - otherwise why would they cover half the car up? The one pictured isnt' covered up at all, which is a dead giveaway that its not the real deal. And until now we've been told it is a VQ based engine - 3.8L twin turbo, so who knows who to believe. Nissan apparently haven't been telling anyone anything so this article is as much a guess as any other info you might read. Until the tokyo motor show this year we'll know nothing. Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3348729 Share on other sites More sharing options...
Rezz Posted September 14, 2007 Share Posted September 14, 2007 And until now we've been told it is a VQ based engine - 3.8L twin turbo, so who knows who to believe. Nissan apparently haven't been telling anyone anything so this article is as much a guess as any other info you might read. Until the tokyo motor show this year we'll know nothing. Yep you're right. Just one thing... theres hundreds of thousands of people who want to know beforehand. So these articles cater for those people... whether they're right or wrong. October 24th is going to be the acid test day for Holiday Auto. Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3349170 Share on other sites More sharing options...
predator Posted September 15, 2007 Share Posted September 15, 2007 Well we all know what it looks like from this video: Price looks to be $80k for japan.. if it ever gets released here expect a price 30k or so above that I'd imagine. The release date in Japan for the new GT-R has been confirmed for 24th October 2007. official pricing and has also been released in japan Nissan dealers have said to expect a cost price of 7.7million yen in JAPAN drive away, but that does not include registration, taxes and importation to other countries, which could increase the price upto 30-40% Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3350805 Share on other sites More sharing options...
T04GTR Posted September 15, 2007 Share Posted September 15, 2007 semi wet sump? what a gtr with an actual track ready oiling system hehe Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3350875 Share on other sites More sharing options...
T04GTR Posted September 15, 2007 Share Posted September 15, 2007 twin turbos with integrated exhaust manifolds (never heard of that before), semi-wet sump, and Euro 5 compliant emissions. So the game has lifted since 2000? Good thing the new GT-Rs engine has too Btw, the VK is based on the VQ, not the VRH (VH) yaeh you have. the old holden calibra turbo had it. and im pretty sure the new astra turbo has it to. bit of an opel trick. Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3350885 Share on other sites More sharing options...
ricsvtr Posted September 18, 2007 Share Posted September 18, 2007 I know a genuine Panaphonics when I see one.......... personally I prefer Sorny Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3357016 Share on other sites More sharing options...
eMsta Posted September 18, 2007 Share Posted September 18, 2007 Could this be yet another Japanese magazine printing a wish list + photoshops as an article claiming to be the real specs or will this be the final engine spec??? Who knows:http://www.7tune.com/?p=106 Hey i see they're using those new "blembo" brakes i hear so much about lol @ blembo!!!!!!! Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3357067 Share on other sites More sharing options...
SS8_Gohan Posted September 19, 2007 Share Posted September 19, 2007 7.8mil new, Justin, how much does a 997 Turbo go for new in japan? Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3361099 Share on other sites More sharing options...
Butler Posted October 5, 2007 Share Posted October 5, 2007 says on that pag 18mil so at well under half the price its an absolute bargain! Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3393225 Share on other sites More sharing options...
SS8_Gohan Posted October 5, 2007 Share Posted October 5, 2007 add 101yen exchange rate, that makes a 997 Turbo ~$180k AUD. They retail for $330K+ so how you extrapolate that to a GTR price is anyones guess, because going by that, you roughly double the price (53% or multiple the yen price by about 1.47 to get a rough Oz showroom price) . Making an Oz delivered GTR $115K from the Porsche calculations But Porsche make money off their cars, i don't know if Nissan would be hunting for a net profit on just 1 unit sale (before servicing, parts, etc)? i like that price Link to comment https://www.sau.com.au/forums/topic/184628-holiday-auto-magazine-print-next-gtr-engine-specs/#findComment-3393271 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now