Jump to content
SAU Community

Recommended Posts

Ok, heres a chance to let out some automotive frustration!

I am doing a bit of a project for uni and looking at some bad design in transport, particularily in cars.

Just wanted some feedback as to any bad design you guys have come accross within any type of car or its function. For example a switch functioning in a wiered way compared to what you percieve it should do when you first go to use it... basically something which doesnt work or do what it should do.

One instance I came accross is on some Eurpean cars, where reverse is on the top left, you have to firstly, push the stick forward (this, when you are trying to drive backwards in reverse) as well as lift up on the gear knob, otherwise it wont go into the reverse gear (without there being any visual indication to do so).

Any other examples or input would be grealty appreciated!

Link to comment
https://www.sau.com.au/forums/topic/184824-bad-design-in-cars/
Share on other sites

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Auto gear boxes which, when used in manual mode have the upshift & downshift function upside down. Most boxes you have to press forward to change up & pull back to change down. This is backwards & counter intuitive. One fo the few companies to get it right is Ford.

Indicator stalk on the left hand side of the steering wheel in a right hand drive car is a long time bug bear.

Interlocks which make you put your foot on the brake to change between drive & reverse.

The r33 ariel going all the way up whenever the stereo is on...

the massive blind spot in mum's camry....

single point injection

the 3 speed auto in my old vk... I mean WTF!

idrive

gigantic bus like steering wheels in sports cars

standard auto boxes that change all over the place when you dont want or need it

power figures at the flywheel

paddle shift, and tiptronic. If i want manual, i want MAN-U-AL!

the auto clutch in some old vw beetles

90's american sports cars.

digital speedo's

that should get you started :closedeyes:

anything made by daewoo, ssang yong... etc lol

cars with wiper stalks and indicators swapped around...i know its european, but we are in oz ffs.

oil filters that are sometimes near impossible to get to

theres more, but i cant think of any atm

the newer cars are, the less thought has gone into the ease of replacing parts. even basic servicing is getting retarded..

oh and the drainage channel behind the front guards on most nissans.. just traps moisture and rusts.

+1 The r33 ariel going all the way up whenever the stereo is on...

I mean why put in a swtich for hte user to decide if it was to go up.. im usually playing a cd an that dont need no aerial... pet pieve

f**king paddle shifts, so damn retarded.....like it was mentioned above....If I want manual, I had better see the H pattern and a clutch

Another silly deisgn would be the 90s BMW which I drove once.....the handbrake was very very awkward

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...