Jump to content
SAU Community

Recommended Posts

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Heater box positioning. Placing an extremely expensive, non serviceable item prone to leakage where it generally is impossible to access without removing effectively half the interior, and is guaranteed to at some point leak and spark off rust issues in the floor pan, is pretty stupid really.

Everything on the intake side of the HR31 RB20DET; it is near impossible to access anything on that side with the gearbox in, in fact most things would be easier with the engine out. That doesn't just go for the complex network of sensors and vacuum actuators, but also for things like the oil filter. I believe its mostly due to the short deck height and extreme width of the head, which puts the bulky intake very close to the strut tower. RB25s and RB30s in the same engine bay are nowhere near as bad.

alot of cars i get into with manual window winders, i find the winders are facing up when the window is right down, and sticks into the side of my knee. frustrating when just trying to cruise with the window down, i either have to put the window up a lil and have it sticking into the underside of my arm, or leave it down and have the winder in the side of my knee

I just realised this morning that the 32's handbrake position is shit. You can't have your car in reverse and push the handbrake button down easily. Just say you are on a hill and need to reverse out. The handbrake is a bit close to the gearstick.

+1 For That in my 33....the long ass gear leaver in my car touches the handbrake in reverse

My R31 looks like a fridge on wheels.

In my experience, fridges often have beer in them. I don't see the problem?

Re R33 antennas, mine went crazy one day and went all the way up on half. i turned it to full, and nothing happened. turned it back to half and it went all the way in. turned the radio off and then back on again and it stayed in. turned it to full and it went all the way up.

a day later it mysteriously fixed itself and went back to normal :laughing-smiley-014:

R33 has very, very few things that bother me. They are a well sorted car.

alot of cars i get into with manual window winders, i find the winders are facing up when the window is right down, and sticks into the side of my knee. frustrating when just trying to cruise with the window down, i either have to put the window up a lil and have it sticking into the underside of my arm, or leave it down and have the winder in the side of my knee

+ 11ty

The R33 cup holder isn't movement proof, its got that thing for holding cans but no support at the front. Even under gentle braking I've had it fall out.

Boot space is shocking in the 33 for a car it's size, it just fits 2 sets of golf clubs... just. Victim of having the fuel tank between the rear seat and boot.

People quickly learn that anything not bolted to something else in my car, moves. I don't leave drinks in the console for the same reason, besides which it's not deep enough and it gets in the way of changing gears. I suppose that's a minor annoyance but it doesn't bother me *shrug*

Boot space is pretty bad but I think it is designed for the jap businessman who only needs to carry golf clubs.

  • 2 weeks later...
Re R33 antennas, mine went crazy one day and went all the way up on half. i turned it to full, and nothing happened. turned it back to half and it went all the way in. turned the radio off and then back on again and it stayed in. turned it to full and it went all the way up.

a day later it mysteriously fixed itself and went back to normal :laughing-smiley-014:

f**king jinxed myself, now it has shit itself good and proper :happy:

Electronic throttles suck balls.

Oh doesn't it. My driving style dictates that to slow my car down while going down a hill that I push in the clutch, hit the accelerator for a moment, then shove it into a lower gear. Works just fine with a cable driven throttle. Electronic ones don't quite have the response I like... and I don't enjoy compression lock up in a front wheel drive Volkswaggen Caddie...

The beverage holder in the R33 seems pretty useless, mainly because I'm always changing gears. Its usually my mobile holder, and it does that pretty dismally too lol

Reverse in Euro cars, I want it under 5th or next to 6th, not next to 1st.

Wiper/Indicators in Euro cars, wrong way around :wave:

Anything with over 120kWs and front wheel drive... Magna, 380, Aurion (although, its ment to be pretty good lol), Camry, ect. Torque/under steer... Plus, I want a tail shaft damn it!

No dimmer for the dash illumination in my R33. Sure, not needed in the city, but when I go bush and there is wildlife near the road, I want full concentration on the road :D

The fuel consumption thing in BMWs. OMG!! Distracting :D Wants an on/off button.

Over use of plastic in engine bays.

Plastic throttle bodies designed for climates around Britan and such. Got 3000rpm idle?

Overly powerful power steering. I like to feel some effort.

BG model Mazda 323s - the A pillar plastic trim always goes brittle and falls off, and you cant get them second hand because they break as soon as you try and take them off :yucky:

Surprisingly, +1

definently +1! haha ive owned 2 BGs, the first one was mint and had them (but wrote the car off...) but my current ones are totally broken!

oh and the oil filter in BGs is also a real bitch.. not sure how it compares to rb26s tho..

apex seals in rotarys? i really wish all cars were rotaries (cause they just keeep spinning) but those bloody apex seals....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...