Jump to content
SAU Community

Recommended Posts

Thanks for that !

We don't have the 3 gauges as you suspected.

The previous owner did a slightly dodgy install of a boost gauge already. He spliced into one of the other lines when he could have just used this spare one !

  • 2 weeks later...

Aww the wagon still looks mad - now looks like a cx7 mazda, why do that?

Anyway - Will AXIS S front bar + grill will fit my 01 ARX?

2005+ Axis S (PM35) will not look nice as it doesn't line up with the flares off an 2001-2004 (NM35) ARX/Axis and the PM35 headlights are much larger than the NM35 headlights.

If you are referring to a NM35 Axis, then yes it will bolt straight up on your ARX.

If you are doing a PM35 front conversion (like I have), stick with the normal Axis fromt bar.

I have the Axis S front bar which bolts up, but I have an RS and have also replaced the headlights and bonnet.

Hows the market of this in Japan? do they sell well?

Skyline Registrations in Japan:

Bodystyle/Engine 3.7 Coupe 2.5 Sedan 3.5 Sedan 3.7 Sedan 3.7 SUV________Total Market cars...

09_____________983_______3,398______20_______860_____1,601_________3,917,343

10_____________558_______6,671_______0_______526_____1,215_________4,204,966

Edited by nickcorr
  • Like 2

Skyline Registrations in Japan:

Bodystyle/Engine 3.7 Coupe 2.5 Sedan 3.5 Sedan 3.7 Sedan 3.7 SUV________Total Market cars...

09_____________983_______3,398______20_______860_____1,601_________3,917,343

10_____________558_______6,671_______0_______526_____1,215_________4,204,966

Not a bad result..

  • Like 1
  • Nope 1

Not a bad result..

So basically we will see these cars imported in Australia sooner and later? and also want to confirm that this is numbers are all only in japan

so Skyline SUV that replaced Stags

09 sold 1601

10 sold 1215

Nissan Skyline Crossover has replaced the Stagea. You'll see these running around in the near future.

http://www.themotorreport.com.au/37133/2009-nissan-skyline-crossover-released-in-japan

If you guys are going to comply them, you'd better move on them Eugene

http://www.fabcar.com.au/2010/09/13/skyline-crossover-pics/

So basically we will see these cars imported in Australia sooner and later? and also want to confirm that this is numbers are all only in japan

so Skyline SUV that replaced Stags

09 sold 1601

10 sold 1215

Yes all Japanese new car registrations, and 09 was first year on sale for the Skyline crossover...

In context, the M35 registrations in Japan;

Year___2.5 Turbo___2.5 NA___3.0 NA____3.5 NA____Total

02_____6,118_____10,208___ 2,038________0_____18,364

03_____4,004_____ 6,679_____312_________0____10,996

04______656______6,502_____342_____1,005______8,505

05________0______5,149_______0_____1,354______6,503

06________0______3,028_______0______803______3,831

07________0______1,125_______0______309______1,434

08________0_________0_______0________2__________2

Sorry, no splits before 2001 but totals for all Stageas are;

01__13,631

00__16,021

99__20,456

98__25,344

97__48,313

96__18,006

  • Like 1
  • 4 weeks later...

This has probably been posted before but I just stumbled upon this site which appears to be an online shop dedicated to the m35 !

(I was trying to decipher Japanese on the yahoo auction site and happened to click on the link!)

auto-style

(You'll need google to translate)

This has probably been posted before but I just stumbled upon this site which appears to be an online shop dedicated to the m35 !

(I was trying to decipher Japanese on the yahoo auction site and happened to click on the link!)

auto-style

(You'll need google to translate)

very nice find!!!worship.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...