Jump to content
SAU Community

Recommended Posts

When I had a dying battery, mine would throw the Airbag light several times a day.

New battery sorted it.

Reset the fault and see how you go.

Edited by Daleo

I have a consult III unit here that tells me which airbag is at fault, as well as errors from every other ecu in the car. Seems to work well from my testing and should work on any Nissan, even the older consult rectangle plugs.

Anyone interested in a group buy?

How much were they?

I know which airbag caused mine - the steering wheel one when I did the cruise control. Reconnected the airbag properly, and it didn't go away. I also didn't reset the fault, figured it'd go away like a CEL.

Probably around $400 shipped Ryan, depending how many we get. Beware, there are a few different types out there, I have tried a few now. Some are just standard obd2 readers, some are more like a consult III clone.

Anyone in Melbourne can drop down here for diagnostic repairs now. :)

Thanks for the replies lads. So it's a common occurence for other m35 owners too...

I was just suprised the light come on in the dash unprovoked / without any collision / stuffing around with any interior bits & pieces. I just jumped in to go for a drive on Friday night, and now it just flashes away as I drive.

Come to think of it - the only thing I remotely touched (that may be close to airbag plugs or something) was the mass storage and iPod connectors that sit in my glove box for the stereo. Gave them a bit of a yank just to access them.

Will check for any electrical plugs and the sort that may be responsible tonight.

If still no go, might give the error code reading a go over the weekend, and see if I can clear it. Unfortunately me and diagnostic functions arent very familiar with eachother; knowing me I may kill something!

Cheers

L

Come to think of it - the only thing I remotely touched (that may be close to airbag plugs or something) was the mass storage and iPod connectors that sit in my glove box for the stereo. Gave them a bit of a yank just to access them.

The main SRS box is under the centre console, but there is the passenger side airbag connector above the glove box. Maybe the stereo leads were wound around the airbag cable?

The main SRS box is under the centre console, but there is the passenger side airbag connector above the glove box. Maybe the stereo leads were wound around the airbag cable?

Had a look after work today; spotted a plastic connector with orange wires that sits above a little compartment in the top center of the glove box. All looked in tact from a glance. Just made sure the wiring on the plug wasn't twisted or damaged. The stereo leads were however tucked a little snug around this plug, so i just freed them and fed them through into the glove box away from the plug in question. Managed to clear the airbag light using a method posted in another thread, but went for a drive a short time ago and sure enough the bastard is flashing again... Might need to look at full diagnostic mode to get codes. Blah...

Yeah mate, that guide will help get the door apart. They are sooks tho, saying you need a 2nd person to hold it while the other unplugs the wires - bah!

Yeah mate, that guide will help get the door apart. They are sooks tho, saying you need a 2nd person to hold it while the other unplugs the wires - bah!

Sweet. Cheers!

Is there a fuse for EACH speaker? Just wondering if its a blown fuse...

Any idea if the splits will continue to work if I replace the 6.5" speakers only?

  • 2 weeks later...

Hey guys,

Not sure where else to post this but thought I'd let you know. There's an '03 M35 (that looks in ok nic) being wrecked for $25 in Adelaide on Gumtree.

Link: http://www.gumtree.com.au/s-ad/wingfield/wrecking/nissan-m35-stagea-nisswreck-wrecking/1003055156#

Surely this sort of thing wouldn't happen to C34's.. ;p

Hey guys,

Not sure where else to post this but thought I'd let you know. There's an '03 M35 (that looks in ok nic) being wrecked for $25 in Adelaide on Gumtree.

Link: http://www.gumtree.c...king/1003055156#

Surely this sort of thing wouldn't happen to C34's.. ;p

The whole car isnt going for $25, I can assure you of that :) The company in question that have that car have typically charged an arm and a leg for any parts off the M35's they bring in to the country for wrecking. A free ad on gumtree is just a simple & cheap way of getting the word out they're doing it again :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...