Jump to content
SAU Community

Recommended Posts

with my OS tripple I never stall it, can do hill starts no problem. even with a small 'take up zone' all you need is a small amount of clutch control to drive it easily. so practice up.

i call bulshit!! recall someone stalling when someone took me for a spin... lol

I think you guys need some serious driving practice. I haven't driven a clutch yet I couldn't get the hang of within half an hour.

I'll second that, I never have problems with any clutch after a few starts . You guys think the Nismo twin is bad in traffic........I would have to say its one of the best twins to drive .

The next best is a stocker full face plate but it won't hold much..

I had an unsprung HKS twin plate. The tuner stalled it, the shop owner stalled it and then I did. But I soon got used to it, first day I got stuck in a traffic jam on the freeway...every set of lights was a mini launch. You just have to be more switched on and purposeful in your driving. Sprung center doesn't require much concentration at all

I was helping out at the last SAU dyno day driving cars on and off the dyno. Even Daves tripple plate didn't get me although I was warned about it. What's this thread about again? I forget. Yeah, umm, you'll get used to it.

I think you guys need some serious driving practice. I haven't driven a clutch yet I couldn't get the hang of within half an hour.

I my own cars I've had standard, nismo single, heaving duty exedy single, OS twin (solid centre) OS tripple (solid centre) and quickly adapted to all of them. I've also driven tilton twin, carbon single, and various twins, singles and tripples.

with my OS tripple I never stall it, can do hill starts no problem. even with a small 'take up zone' all you need is a small amount of clutch control to drive it easily. so practice up.

i agree with you, but the single plate i had in my rb20 was with no exageration 100 times harder to drive than my os twins and the os twins were harder to drive than the os triple.

actually the os triple is real easy to drive for a big hp clutch

definately hard core singles are much less friendly that hard core twins and tripples. basically to get a given single to hold the same power as a given twin you need a much higher clamp force in the single (as you are working with half the surface area) so hard core singles are generally the worst.

definately hard core singles are much less friendly that hard core twins and tripples. basically to get a given single to hold the same power as a given twin you need a much higher clamp force in the single (as you are working with half the surface area) so hard core singles are generally the worst.

Fits my experience.

I still fight with the JB Full Monty in my GTR.

Jumping from car to car to 4wd etc and then get into the GTR occasionally - bastard red faces me every time. You try to be quiet/gentle taking off in traffic and it is easy to stall. If rolling ever so slightly its fine and you do get used to it again fairly quickly. I have noticed it is not a clutch to ride as it glazes quickly and needs a bit of harder action to clean it up. Can launch like a rocket though.

Just need bigger sunglasses and darker tint on the windows. lol

well some people have it and reckon it's easy to drive. they reckon mine isn't installed correctly...

it's actually really light, but has a hair trigger - on or off.

it's only done about 1,000kms, so might get better with some time.

it can be slipped, but I don't get 'used' to it as it get driven about once or twice a month :(

you might like it...

If I drive my GTR often, the ORC twin plate is great. It's only when I'm not thinking that it bites me.

The most annoying part about it that's dificuilt is that the friction point is more than half way out on the clutch pedal.... so you have to keep releasing your foot to almost the end of the pedal travel. That makes it hard to find and hit's as a surprise sometimes.

If it was closer to the firewall, it would be so so so much easier.

However, I've fallen in love with the clutch and wouldn't go for anything else now.

The most annoying part about it that's dificuilt is that the friction point is more than half way out on the clutch pedal.... so you have to keep releasing your foot to almost the end of the pedal travel. That makes it hard to find and hit's as a surprise sometimes.

If it was closer to the firewall, it would be so so so much easier.

yeah i found this was the biggest issue, you slowly bring it up... and up... and up... then POW!

update guys: im getting much better driving these twins now, only hill starts are a bitch, i just take my time hahaha. I wouldnt go for anything else in saying all this, as when it catches, it catched hard, and i love it, im so used to stalling the car, its become 2nd nature on the street, but yeh im down to about maybe once every 3 days?....getting there slowly:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You know what, I am enjoying your updates, but I have to say it is pretty poor form to walk into a shop that is paying for space and stock on the floor, try all their seats to work out what you are happy with, then buy somewhere else. If everyone did that the shop will be out of business with no opportunity for anyone to try a seat before buying. 👎  
    • Good work, and thanks for posting up your solution for future people!
    • Yeah mate that’s the plan, I just want something I can have fun in and work on during weekends.  There’s really only 1 road fit to drive the car on and luckily is been redone recently.  I do want to tune it next year sometime, no dynos here so I’m looking at an ECU that can be remote tuned. 
    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
×
×
  • Create New...