Jump to content
SAU Community

Recommended Posts

wrote off the 32 last night

on kwinana fwy, doing 80 k's, and over took a car in the wet, basically as soon as turbo spooled the rearend threw out as i was turning into the lane and threw me into the barrier at 80, rebounded off it hit the other side accross 4 lanes and then came back again the other way and headed directly off the side of the bridge and so I chucked it sideways and hit the barrier dead on the side and bounced back again and came to a stop back on the other side of the road...

pics up tomorrow... got a bit of a sore head from hitn it on the B pillar a few times and im startn to feel some musculer pains..

no insurance, didnt hit any other cars in peak hour traffic and im not dead.. so thats the positives.. negative is im guna have fun deciding what im going to do after i pay the transfer fee with a wrecked skyline.

pics up tomorrowheres teh pics :whistling: man felt like i wanted to cry when i saw the mess I had made.

wreck001.jpg

wreck002.jpg

wreck003.jpg

wreck004.jpg

wreck005.jpg

car will be sadly missed :thumbsup: probably the nicest car I have ever driven and the time that im not being a fool i get caught out for driving by the rules.. wouldnt of happened if it was in the dry

if anyone knows of anyone who has a Skyline GTS R32 they are tryn to sell let me know.. or even if someone is wrecking a body (dont want no accident on it tho)

Edited by BANGN
Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Shite :)

I lost my last 3 demerit points not being a hoon just hit boost and cops chopped me over a second of wheelspin. Bloody rain! I've had my back end come out on the freeway over taking like you did aswell it was scarey but kinda fun..

I reckon you should fix it up mate. Take it to a few good panel beaters and see what the damage really is..

Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3371576
Share on other sites

well - it wont buff out thats for sure

however it doesnt look like its sitting crooked so thats a plus

get a panel beater to have a look at it - you may have escaped with no chassis twist and only damaged panels and prob some suspension

i would first find out whether its worth repairing b4 declaring it a 'writeoff'

Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3371603
Share on other sites

yeh im lookn into it atm.. iv had a few encounters of it getn sideways in the wet without meaning too. roundabout ect pretty allways managed to catch it back peice of pie but there was somthn allways planted in my mind that this might happen one day..

Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3371607
Share on other sites

thats so far from a write off its not funny

will cost a few grand to get fixed, but new rear 1/4's are buyable direct from nissan for 800 a throw, couple of guards and a bumper, lights, fixed..

but if you can afford to fix it, ill buy it off you and fix it myself :)

Edited by Denver
Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3371914
Share on other sites

imho, its not worth buying a a gts and transfering it..as i have a charade now, i was thinking of doing the same thing when another charade with turbo came up.

when doing a "simple body swap" u have to consider, ur changing engine, wiring and otehr electricals, suspension, brakes, exhaust, driveline (gts have to lsd's) and tahts just the outside. the interior may be the same but u'll lose ur

suade cloth.

also if u buy another full car instead of just a shell, ur gonna have to take out everything from that gts b4 u can put in ur stuff, so in effect ur paying for 2 removals, one install..

im not panel beater, but the things that are gonna cost u the most are ur rear fenders. fronts are cheap. so are lights, front bumpers, and rear lights.

hell y ur at it, y not put gtr guards? kyp auto's has a rear gtr cut, give him a call, he's also go front lights and rear lights, so may beable to do u a deal.

engine's not f**ked either. even the intercooler looks untouched. hell even the boot.

but like everyone has said its ur car ur money. its just cheaper to fix it.

(btw sorry for long post. hope it helps)

Edited by J_R32
Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3372009
Share on other sites

Damage looks superficial, but id look closer at suspension at chassis.

You have GTR panels all round dont cya?

I can tell you right now brand new OEM front GTR fender(1) is about $800, bumper $600, lower bumper lip $400, if bought new from Nissan, and you'll have to wait... I know this because my 'R got ute spec'd, but his insurance is covering it, lucky for me (sorry!), but the waiting game begins.

These panels can be difficult to source second hand, but defiantly worth looking.

If it was me in your position, Id be looking at the Bee*R R324 conversion kits.

Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3372815
Share on other sites

that sucks man,and you just bought it didn't u? back of my 32 loved to step out in the wet when it hit boost it can catch u off gard very easily.

from wat i can see u need:

front bumper

rear bumper

2 front gards

2 rear gards

2 head lights

2 tailights with surrounds

then plus fitting/painting of all that stuff it's not going to be to cheap. but it's a nice looking 32 so in my opion it's worth it.

Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3372990
Share on other sites

ur old bumper got draged under the car, it had some scrapes on it but it wasnt broken, i went to go collect it from side of road but I was not willing to cross 4 lanes on the fwy to get it.. id rather keep my life. plus i got more to worry about than a bumper :(

well at least the bar didnt go to waste Ty :(

the plan was to sell this 32 and levin cos i was guna buy another rolla and buy an 86 trueno and turn it into a 10 second 3sgte.. oh well guna have to wait a bit arnt I :(

Edited by BANGN
Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3373057
Share on other sites

ur old bumper got draged under the car, it had some scrapes on it but it wasnt broken, i went to go collect it from side of road but I was not willing to cross 4 lanes on the fwy to get it.. id rather keep my life. plus i got more to worry about than a bumper :(

well at least the bar didnt go to waste Ty :(

the plan was to sell this 32 and levin cos i was guna buy another rolla and buy an 86 trueno and turn it into a 10 second 3sgte.. oh well guna have to wait a bit arnt I :(

HAHA ye your old bumper would have finished in a million peices, just remember lifes not replacable, r32 skyline are

cheers ty

Link to comment
https://www.sau.com.au/forums/topic/186526-r32-sky-rip/#findComment-3373122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...